}
EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
-static void ath9k_hw_config_serdes_wow_sleep(struct ath_hw *ah)
-{
- int i;
-
- for (i = 0; i < ah->iniPcieSerdesWow.ia_rows; i++)
- REG_WRITE(ah, INI_RA(&ah->iniPcieSerdesWow, i, 0),
- INI_RA(&ah->iniPcieSerdesWow, i, 1));
-
- usleep_range(1000, 1500);
-}
-
static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
return;
- } else {
- if (!AR_SREV_9300_20_OR_LATER(ah))
- REG_WRITE(ah, AR_RXDP, 0x0);
}
- /* AR9280 WoW has sleep issue, do not set it to sleep */
- if (AR_SREV_9280_20(ah))
- return;
-
REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
}
/* set the transmit buffer */
ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
-
- if (!(AR_SREV_9300_20_OR_LATER(ah)))
- ctl[0] += (KAL_ANTENNA_MODE << 25);
-
ctl[1] = 0;
ctl[3] = 0xb; /* OFDM_6M hardware value for this rate */
ctl[4] = 0;
ctl[7] = (ah->txchainmask) << 2;
-
- if (AR_SREV_9300_20_OR_LATER(ah))
- ctl[2] = 0xf << 16; /* tx_tries 0 */
- else
- ctl[2] = 0x7 << 16; /* tx_tries 0 */
-
+ ctl[2] = 0xf << 16; /* tx_tries 0 */
for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
- /* for AR9300 family 13 descriptor words */
- if (AR_SREV_9300_20_OR_LATER(ah))
- REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
(KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
- if (!AR_SREV_9285_12_OR_LATER(ah))
- return;
-
if (pattern_count < 4) {
/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
set = (pattern_len & AR_WOW_LENGTH_MAX) <<
{
u32 wow_status = 0;
u32 val = 0, rval;
+
/*
* read the WoW status register to know
* the wakeup reason
val &= ah->wow_event_mask;
if (val) {
-
if (val & AR_WOW_MAGIC_PAT_FOUND)
wow_status |= AH_WOW_MAGIC_PATTERN_EN;
-
if (AR_WOW_PATTERN_FOUND(val))
wow_status |= AH_WOW_USER_PATTERN_EN;
-
if (val & AR_WOW_KEEP_ALIVE_FAIL)
wow_status |= AH_WOW_LINK_CHANGE;
-
if (val & AR_WOW_BEACON_FAIL)
wow_status |= AH_WOW_BEACON_MISS;
-
}
/*
REG_WRITE(ah, AR_WOW_PATTERN,
AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
- /*
- * tie reset register for AR9002 family of chipsets
- * NB: not tieing it back might have some repurcussions.
- */
-
- if (!AR_SREV_9300_20_OR_LATER(ah)) {
- REG_SET_BIT(ah, AR_WA, AR_WA_UNTIE_RESET_EN |
- AR_WA_POR_SHORT | AR_WA_RESET_EN);
- }
-
-
/*
* restore the beacon threshold to init value
*/
* reset to our Chip's Power On Reset so that any PCI-E
* reset from the bus will not reset our chip
*/
-
- if (AR_SREV_9280_20_OR_LATER(ah) && ah->is_pciexpress)
+ if (ah->is_pciexpress)
ath9k_hw_configpcipowersave(ah, false);
ah->wow_event_mask = 0;
* are from the 'pattern_enable' in this function and
* 'pattern_count' of ath9k_hw_wow_apply_pattern()
*/
-
wow_event_mask = ah->wow_event_mask;
/*
* WOW sleep, we do want the Reset from the PCI-E to disturb
* our hw state
*/
-
if (ah->is_pciexpress) {
-
/*
* we need to untie the internal POR (power-on-reset)
* to the external PCI-E reset. We also need to tie
* the PCI-E Phy reset to the PCI-E reset.
*/
-
- if (AR_SREV_9300_20_OR_LATER(ah)) {
- set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
- clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
- REG_RMW(ah, AR_WA, set, clr);
- } else {
- if (AR_SREV_9285(ah) || AR_SREV_9287(ah))
- set = AR9285_WA_DEFAULT;
- else
- set = AR9280_WA_DEFAULT;
-
- /*
- * In AR9280 and AR9285, bit 14 in WA register
- * (disable L1) should only be set when device
- * enters D3 state and be cleared when device
- * comes back to D0
- */
-
- if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
- set |= AR_WA_D3_L1_DISABLE;
-
- clr = AR_WA_UNTIE_RESET_EN;
- set |= AR_WA_RESET_EN | AR_WA_POR_SHORT;
- REG_RMW(ah, AR_WA, set, clr);
-
- /*
- * for WoW sleep, we reprogram the SerDes so that the
- * PLL and CLK REQ are both enabled. This uses more
- * power but otherwise WoW sleep is unstable and the
- * chip may disappear.
- */
-
- if (AR_SREV_9285_12_OR_LATER(ah))
- ath9k_hw_config_serdes_wow_sleep(ah);
-
- }
+ set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
+ clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
+ REG_RMW(ah, AR_WA, set, clr);
}
/*
* Program default values for pattern backoff, aifs/slot/KAL count,
* beacon miss timeout, KAL timeout, etc.
*/
-
set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
REG_SET_BIT(ah, AR_WOW_PATTERN, set);
/*
* Keep alive timo in ms except AR9280
*/
- if (!pattern_enable || AR_SREV_9280(ah))
+ if (!pattern_enable)
set = AR_WOW_KEEP_ALIVE_NEVER;
else
set = KAL_TIMEOUT * 32;
/*
* Configure MAC WoW Registers
*/
-
set = 0;
/* Send keep alive timeouts anyway */
clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
else
set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
- /*
- * FIXME: For now disable keep alive frame
- * failure. This seems to sometimes trigger
- * unnecessary wake up with AR9485 chipsets.
- */
set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
-
REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
-
/*
* we are relying on a bmiss failure. ensure we have
* enough threshold to prevent false positives
set |= AR_WOW_MAC_INTR_EN;
REG_RMW(ah, AR_WOW_PATTERN, set, clr);
- /*
- * For AR9285 and later version of chipsets
- * enable WoW pattern match for packets less
- * than 256 bytes for all patterns
- */
- if (AR_SREV_9285_12_OR_LATER(ah))
- REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
- AR_WOW_PATTERN_SUPPORTED);
+ REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
+ AR_WOW_PATTERN_SUPPORTED);
/*
* Set the power states appropriately and enable PME
clr = 0;
set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
AR_PMCTRL_PWR_PM_CTRL_ENA;
- /*
- * This is needed for AR9300 chipsets to wake-up
- * the host.
- */
- if (AR_SREV_9300_20_OR_LATER(ah))
- clr = AR_PCIE_PM_CTRL_ENA;
+ clr = AR_PCIE_PM_CTRL_ENA;
REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
- if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
- /*
- * this is needed to prevent the chip waking up
- * the host within 3-4 seconds with certain
- * platform/BIOS. The fix is to enable
- * D1 & D3 to match original definition and
- * also match the OTP value. Anyway this
- * is more related to SW WOW.
- */
- clr = AR_PMCTRL_PWR_STATE_D1D3;
- REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
-
- set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
- }
-
+ /*
+ * this is needed to prevent the chip waking up
+ * the host within 3-4 seconds with certain
+ * platform/BIOS. The fix is to enable
+ * D1 & D3 to match original definition and
+ * also match the OTP value. Anyway this
+ * is more related to SW WOW.
+ */
+ clr = AR_PMCTRL_PWR_STATE_D1D3;
+ REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+ set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
- if (AR_SREV_9300_20_OR_LATER(ah)) {
- /* to bring down WOW power low margin */
- set = BIT(13);
- REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
- /* HW WoW */
- clr = BIT(5);
- REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
- }
+ /* to bring down WOW power low margin */
+ set = BIT(13);
+ REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
+ /* HW WoW */
+ clr = BIT(5);
+ REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
ath9k_hw_set_powermode_wow_sleep(ah);
ah->wow_event_mask = wow_event_mask;
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff