drm/i915: Create a struct to hold information about the broxton phys
authorAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Thu, 6 Oct 2016 16:22:20 +0000 (19:22 +0300)
committerAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Fri, 28 Oct 2016 09:24:51 +0000 (12:24 +0300)
Information about which phy is dual channel is hardcoded in the phy init
sequence. Split that to a separate struct so the init sequence is more
generic.

v2: Restore mangled part that ended up in following patch. (Imre)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9102f4c984044126057e4fdd1b91a615ff25fae6.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_dpio_phy.c

index 2f504f6a1c51e6882874871a750ac5ddc732f303..44683f9286a140320c7d3cc41291e3786a0277cf 100644 (file)
@@ -1307,8 +1307,13 @@ enum skl_disp_power_wells {
 #define BXT_PORT_CL1CM_DW30(phy)       _BXT_PHY((phy), _PORT_CL1CM_DW30_BC, \
                                                        _PORT_CL1CM_DW30_A)
 
-/* Defined for PHY0 only */
-#define BXT_PORT_CL2CM_DW6_BC          _MMIO(0x6C358)
+/* The spec defines this only for BXT PHY0, but lets assume that this
+ * would exist for PHY1 too if it had a second channel.
+ */
+#define _PORT_CL2CM_DW6_A              0x162358
+#define _PORT_CL2CM_DW6_BC             0x6C358
+#define BXT_PORT_CL2CM_DW6(phy)                _BXT_PHY((phy), _PORT_CL2CM_DW6_BC, \
+                                                       _PORT_CL2CM_DW6_A)
 #define   DW6_OLDO_DYN_PWR_DOWN_EN     (1 << 28)
 
 /* BXT PHY Ref registers */
index 2a18724f9c3b842a6df92e4bd1215a08e4de8d63..1b1fba16d4e930b25d51c6ff906c45feb81e4df4 100644 (file)
  *     -----------------
  */
 
+/**
+ * struct bxt_ddi_phy_info - Hold info for a broxton DDI phy
+ */
+struct bxt_ddi_phy_info {
+       /**
+        * @dual_channel: true if this phy has a second channel.
+        */
+       bool dual_channel;
+
+       /**
+        * @channel: struct containing per channel information.
+        */
+       struct {
+               /**
+                * @port: which port maps to this channel.
+                */
+               enum port port;
+       } channel[2];
+};
+
+static const struct bxt_ddi_phy_info bxt_ddi_phy_info[] = {
+       [DPIO_PHY0] = {
+               .dual_channel = true,
+
+               .channel = {
+                       [DPIO_CH0] = { .port = PORT_B },
+                       [DPIO_CH1] = { .port = PORT_C },
+               }
+       },
+       [DPIO_PHY1] = {
+               .dual_channel = false,
+
+               .channel = {
+                       [DPIO_CH0] = { .port = PORT_A },
+               }
+       },
+};
+
+static u32 bxt_phy_port_mask(const struct bxt_ddi_phy_info *phy_info)
+{
+       return (phy_info->dual_channel * BIT(phy_info->channel[DPIO_CH1].port)) |
+               BIT(phy_info->channel[DPIO_CH0].port);
+}
+
 void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv,
                                  enum port port, u32 margin, u32 scale,
                                  u32 enable, u32 deemphasis)
@@ -156,6 +200,7 @@ void bxt_ddi_phy_set_signal_level(struct drm_i915_private *dev_priv,
 bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv,
                            enum dpio_phy phy)
 {
+       const struct bxt_ddi_phy_info *phy_info = &bxt_ddi_phy_info[phy];
        enum port port;
 
        if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & GT_DISPLAY_POWER_ON(phy)))
@@ -183,9 +228,7 @@ bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv,
                return false;
        }
 
-       for_each_port_masked(port,
-                            phy == DPIO_PHY0 ? BIT(PORT_B) | BIT(PORT_C) :
-                                               BIT(PORT_A)) {
+       for_each_port_masked(port, bxt_phy_port_mask(phy_info)) {
                u32 tmp = I915_READ(BXT_PHY_CTL(port));
 
                if (tmp & BXT_PHY_CMNLANE_POWERDOWN_ACK) {
@@ -220,6 +263,7 @@ static void bxt_phy_wait_grc_done(struct drm_i915_private *dev_priv,
 
 void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy)
 {
+       const struct bxt_ddi_phy_info *phy_info = &bxt_ddi_phy_info[phy];
        u32 val;
 
        if (bxt_ddi_phy_is_enabled(dev_priv, phy)) {
@@ -272,10 +316,10 @@ void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy)
                SUS_CLK_CONFIG;
        I915_WRITE(BXT_PORT_CL1CM_DW28(phy), val);
 
-       if (phy == DPIO_PHY0) {
-               val = I915_READ(BXT_PORT_CL2CM_DW6_BC);
+       if (phy_info->dual_channel) {
+               val = I915_READ(BXT_PORT_CL2CM_DW6(phy));
                val |= DW6_OLDO_DYN_PWR_DOWN_EN;
-               I915_WRITE(BXT_PORT_CL2CM_DW6_BC, val);
+               I915_WRITE(BXT_PORT_CL2CM_DW6(phy), val);
        }
 
        val = I915_READ(BXT_PORT_CL1CM_DW30(phy));
@@ -290,7 +334,7 @@ void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy)
         * FIXME: Clarify programming of the following, the register is
         * read-only with bit 6 fixed at 0 at least in stepping A.
         */
-       if (phy == DPIO_PHY1)
+       if (!phy_info->dual_channel)
                val |= OCL2_LDOFUSE_PWR_DIS;
        I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val);
 
@@ -363,6 +407,7 @@ __phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy,
 bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv,
                              enum dpio_phy phy)
 {
+       const struct bxt_ddi_phy_info *phy_info = &bxt_ddi_phy_info[phy];
        uint32_t mask;
        bool ok;
 
@@ -388,10 +433,10 @@ bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv,
        ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask,
                    "BXT_PORT_CL1CM_DW28(%d)", phy);
 
-       if (phy == DPIO_PHY0)
-               ok &= _CHK(BXT_PORT_CL2CM_DW6_BC,
+       if (phy_info->dual_channel)
+               ok &= _CHK(BXT_PORT_CL2CM_DW6(phy),
                           DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN,
-                          "BXT_PORT_CL2CM_DW6_BC");
+                          "BXT_PORT_CL2CM_DW6(%d)", phy);
 
        /*
         * TODO: Verify BXT_PORT_CL1CM_DW30 bit OCL2_LDOFUSE_PWR_DIS,