/**
* struct iwl_proto_offload_cmd_v3_small - ARP/NS offload configuration
* @common: common/IPv4 configuration
- * @target_ipv6_addr: target IPv6 addresses
+ * @targ_addrs: target IPv6 addresses
* @ns_config: NS offload configurations
*/
struct iwl_proto_offload_cmd_v3_small {
/**
* struct iwl_proto_offload_cmd_v3_large - ARP/NS offload configuration
* @common: common/IPv4 configuration
- * @target_ipv6_addr: target IPv6 addresses
+ * @targ_addrs: target IPv6 addresses
* @ns_config: NS offload configurations
*/
struct iwl_proto_offload_cmd_v3_large {
* @id_and_color: ID and color of the MAC
* @action: action to perform, one of FW_CTXT_ACTION_*
* @mac_type: one of &enum iwl_mac_types
- * @tsd_id: TSF HW timer, one of &enum iwl_tsf_id
+ * @tsf_id: TSF HW timer, one of &enum iwl_tsf_id
* @node_addr: MAC address
* @bssid_addr: BSSID
* @cck_rates: basic rates available for CCK
* @filter_flags: combination of &enum iwl_mac_filter_flags
* @qos_flags: from &enum iwl_mac_qos_flags
* @ac: one iwl_mac_qos configuration for each AC
- * @mac_specific: one of struct iwl_mac_data_*, according to mac_type
*/
struct iwl_mac_ctx_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
* @beacon_time_stamp: beacon at on-air rise
* @phy_flags: general phy flags: band, modulation, ...
* @channel: channel number
- * @non_cfg_phy_buf: for various implementations of non_cfg_phy
+ * @non_cfg_phy: for various implementations of non_cfg_phy
* @rate_n_flags: RATE_MCS_*
* @byte_count: frame's byte-count
* @frame_time: frame's time on the air, based on byte count and frame rate
* struct iwl_scan_offload_profile - SCAN_OFFLOAD_PROFILE_S
* @ssid_index: index to ssid list in fixed part
* @unicast_cipher: encryption algorithm to match - bitmap
- * @aut_alg: authentication algorithm to match - bitmap
+ * @auth_alg: authentication algorithm to match - bitmap
* @network_type: enum iwl_scan_offload_network_type
* @band_selection: enum iwl_scan_offload_band_selection
* @client_bitmap: clients waiting for match - enum scan_framework_client
* struct iwl_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
* @flags: bits 1-20: directed scan to i'th ssid
* other bits &enum iwl_scan_channel_flags_lmac
- * @channel_number: channel number 1-13 etc
+ * @channel_num: channel number 1-13 etc
* @iter_count: scan iteration on this channel
* @iter_interval: interval in seconds between iterations on one channel
*/
/**
* struct iwl_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1
* @reserved1: for alignment and future use
- * @channel_num: num of channels to scan
+ * @n_channels: num of channels to scan
* @active-dwell: dwell time for active channels
* @passive-dwell: dwell time for passive channels
* @fragmented-dwell: dwell time for fragmented passive scan
* @extended_dwell: dwell time for channels 1, 6 and 11 (in certain cases)
* @reserved2: for alignment and future use
- * @rx_chain_selct: PHY_RX_CHAIN_* flags
+ * @rx_chain_select: PHY_RX_CHAIN_* flags
* @scan_flags: &enum iwl_mvm_lmac_scan_flags
* @max_out_time: max time (in TU) to be out of associated channel
* @suspend_time: pause scan this long (TUs) when returning to service channel
* @tlc_info: TLC rate info
* @ra_tid: bits [3:0] = ra, bits [7:4] = tid
* @frame_ctrl: frame control
- * @tx_queue: TX queue for this response
* @status: for non-agg: frame status TX_STATUS_*
* for agg: status of 1st frame, AGG_TX_STATE_*; other frame status fields
* follow this one, up to frame_count. Length in @frame_count.
* 200TU and the TDLS peer is to be given 25% of the time, the value
* given will be 50TU, or 50 * 1024 if translated into microseconds.
* @switch_time: switch time the peer sent in its channel switch timing IE
- * @switch_timout: switch timeout the peer sent in its channel switch timing IE
+ * @switch_timeout: switch timeout the peer sent in its channel switch timing IE
*/
struct iwl_tdls_channel_switch_timing {
__le32 frame_timestamp; /* GP2 time of peer packet Rx */
/**
* struct iwl_link_qual_msrmnt_cmd - Link Quality Measurement command
- * @cmd_operatrion: command operation to be performed (start or stop)
+ * @cmd_operation: command operation to be performed (start or stop)
* as defined above.
* @mac_id: MAC ID the measurement applies to.
* @measurement_time: time of the total measurement to be performed, in uSec.
* struct iwl_nvm_get_info_regulatory - regulatory information
* @lar_enabled: is LAR enabled
* @channel_profile: regulatory data of this channel
- * @regulatory: regulatory data, see &enum iwl_nvm_channel_flags for data
*/
struct iwl_nvm_get_info_regulatory {
__le32 lar_enabled;