hwmon: lis3: Short explanations of platform data fields

Short documentation at kernel doc format.

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

diff --git a/include/linux/lis3lv02d.h b/include/linux/lis3lv02d.h
index c949612ac841062237b0c709d2f184aa076a55ee..d4292c8431e069a52e62431bfb47ecb8b39f84f1 100644 (file)
--- a/include/linux/lis3lv02d.h
+++ b/include/linux/lis3lv02d.h
@@ -1,6 +1,52 @@
 #ifndef __LIS3LV02D_H_
 #define __LIS3LV02D_H_
 
+/**
+ * struct lis3lv02d_platform_data - lis3 chip family platform data
+ * @click_flags:       Click detection unit configuration
+ * @click_thresh_x:    Click detection unit x axis threshold
+ * @click_thresh_y:    Click detection unit y axis threshold
+ * @click_thresh_z:    Click detection unit z axis threshold
+ * @click_time_limit:  Click detection unit time parameter
+ * @click_latency:     Click detection unit latency parameter
+ * @click_window:      Click detection unit window parameter
+ * @irq_cfg:           On chip irq source and type configuration (click /
+ *                     data available / wake up, open drain, polarity)
+ * @irq_flags1:                Additional irq triggering flags for irq channel 0
+ * @irq_flags2:                Additional irq triggering flags for irq channel 1
+ * @duration1:         Wake up unit 1 duration parameter
+ * @duration2:         Wake up unit 2 duration parameter
+ * @wakeup_flags:      Wake up unit 1 flags
+ * @wakeup_thresh:     Wake up unit 1 threshold value
+ * @wakeup_flags2:     Wake up unit 2 flags
+ * @wakeup_thresh2:    Wake up unit 2 threshold value
+ * @hipass_ctrl:       High pass filter control (enable / disable, cut off
+ *                     frequency)
+ * @axis_x:            Sensor orientation remapping for x-axis
+ * @axis_y:            Sensor orientation remapping for y-axis
+ * @axis_z:            Sensor orientation remapping for z-axis
+ * @driver_features:   Enable bits for different features. Disabled by default
+ * @default_rate:      Default sampling rate. 0 means reset default
+ * @setup_resources:   Interrupt line setup call back function
+ * @release_resources: Interrupt line release call back function
+ * @st_min_limits[3]:  Selftest acceptance minimum values
+ * @st_max_limits[3]:  Selftest acceptance maximum values
+ * @irq2:              Irq line 2 number
+ *
+ * Platform data is used to setup the sensor chip. Meaning of the different
+ * chip features can be found from the data sheet. It is publicly available
+ * at www.st.com web pages. Currently the platform data is used
+ * only for the 8 bit device. The 8 bit device has two wake up / free fall
+ * detection units and click detection unit. There are plenty of ways to
+ * configure the chip which makes is quite hard to explain deeper meaning of
+ * the fields here. Behaviour of the detection blocks varies heavily depending
+ * on the configuration. For example, interrupt detection block can use high
+ * pass filtered data which makes it react to the changes in the acceleration.
+ * Irq_flags can be used to enable interrupt detection on the both edges.
+ * With proper chip configuration this produces interrupt when some trigger
+ * starts and when it goes away.
+ */
+
 struct lis3lv02d_platform_data {
        /* please note: the 'click' feature is only supported for
         * LIS[32]02DL variants of the chip and will be ignored for