powerpc/85xx: Rework P3060QDS device tree
authorKumar Gala <galak@kernel.crashing.org>
Wed, 9 Nov 2011 19:21:57 +0000 (13:21 -0600)
committerKumar Gala <galak@kernel.crashing.org>
Thu, 24 Nov 2011 08:01:39 +0000 (02:01 -0600)
Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.

Other changes include:
* Adding of MPIC timer blocks
* Dropping "fsl,p3060-IP..." from compatibles for standard blocks
* Removed mpic interrupt-parent from dcsr-epu node, just use top level
* Removed mpic interrupt-parent from sec nodes, just use top level
* Fixed l3-cache IRQs, we have 2 CPCs, so we should have IRQs for both

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/fsl/p3060si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/p3060qds.dts
arch/powerpc/boot/dts/p3060si.dtsi [deleted file]

diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi
new file mode 100644 (file)
index 0000000..a63edd1
--- /dev/null
@@ -0,0 +1,296 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+       compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
+       interrupts = <25 2 0 0>;
+       #address-cells = <2>;
+       #size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+       compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       clock-frequency = <33333333>;
+       interrupts = <16 2 1 15>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <16 2 1 15>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 40 1 0 0
+                       0000 0 0 2 &mpic 1 1 0 0
+                       0000 0 0 3 &mpic 2 1 0 0
+                       0000 0 0 4 &mpic 3 1 0 0
+                       >;
+       };
+};
+
+/* controller at 0x201000 */
+&pci1 {
+       compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0 0xff>;
+       clock-frequency = <33333333>;
+       interrupts = <16 2 1 14>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <16 2 1 14>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 41 1 0 0
+                       0000 0 0 2 &mpic 5 1 0 0
+                       0000 0 0 3 &mpic 6 1 0 0
+                       0000 0 0 4 &mpic 7 1 0 0
+                       >;
+       };
+};
+
+&rio {
+       compatible = "fsl,srio";
+       interrupts = <16 2 1 11>;
+       #address-cells = <2>;
+       #size-cells = <2>;
+       fsl,srio-rmu-handle = <&rmu>;
+       ranges;
+
+       port1 {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               cell-index = <1>;
+       };
+
+       port2 {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               cell-index = <2>;
+       };
+};
+
+&dcsr {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "fsl,dcsr", "simple-bus";
+
+       dcsr-epu@0 {
+               compatible = "fsl,dcsr-epu";
+               interrupts = <52 2 0 0
+                             84 2 0 0
+                             85 2 0 0>;
+               reg = <0x0 0x1000>;
+       };
+       dcsr-npc {
+               compatible = "fsl,dcsr-npc";
+               reg = <0x1000 0x1000 0x1000000 0x8000>;
+       };
+       dcsr-nxc@2000 {
+               compatible = "fsl,dcsr-nxc";
+               reg = <0x2000 0x1000>;
+       };
+       dcsr-corenet {
+               compatible = "fsl,dcsr-corenet";
+               reg = <0x8000 0x1000 0xB0000 0x1000>;
+       };
+       dcsr-dpaa@9000 {
+               compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
+               reg = <0x9000 0x1000>;
+       };
+       dcsr-ocn@11000 {
+               compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
+               reg = <0x11000 0x1000>;
+       };
+       dcsr-ddr@12000 {
+               compatible = "fsl,dcsr-ddr";
+               dev-handle = <&ddr1>;
+               reg = <0x12000 0x1000>;
+       };
+       dcsr-nal@18000 {
+               compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
+               reg = <0x18000 0x1000>;
+       };
+       dcsr-rcpm@22000 {
+               compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
+               reg = <0x22000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@40000 {
+               compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu0>;
+               reg = <0x40000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@41000 {
+               compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu1>;
+               reg = <0x41000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@44000 {
+               compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu4>;
+               reg = <0x44000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@45000 {
+               compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu5>;
+               reg = <0x45000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@46000 {
+               compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu6>;
+               reg = <0x46000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@47000 {
+               compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu7>;
+               reg = <0x47000 0x1000>;
+       };
+
+};
+
+&soc {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       device_type = "soc";
+       compatible = "simple-bus";
+
+       soc-sram-error {
+               compatible = "fsl,soc-sram-error";
+               interrupts = <16 2 1 29>;
+       };
+
+       corenet-law@0 {
+               compatible = "fsl,corenet-law";
+               reg = <0x0 0x1000>;
+               fsl,num-laws = <32>;
+       };
+
+       ddr1: memory-controller@8000 {
+               compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
+               reg = <0x8000 0x1000>;
+               interrupts = <16 2 1 23>;
+       };
+
+       cpc: l3-cache-controller@10000 {
+               compatible = "fsl,p3060-l3-cache-controller", "cache";
+               reg = <0x10000 0x1000
+                      0x11000 0x1000>;
+               interrupts = <16 2 1 27
+                             16 2 1 26>;
+       };
+
+       corenet-cf@18000 {
+               compatible = "fsl,corenet-cf";
+               reg = <0x18000 0x1000>;
+               interrupts = <16 2 1 31>;
+               fsl,ccf-num-csdids = <32>;
+               fsl,ccf-num-snoopids = <32>;
+       };
+
+       iommu@20000 {
+               compatible = "fsl,pamu-v1.0", "fsl,pamu";
+               reg = <0x20000 0x5000>;
+               interrupts = <
+                       24 2 0 0
+                       16 2 1 30>;
+       };
+
+/include/ "qoriq-rmu-0.dtsi"
+/include/ "qoriq-mpic.dtsi"
+
+       guts: global-utilities@e0000 {
+               compatible = "fsl,qoriq-device-config-1.0";
+               reg = <0xe0000 0xe00>;
+               fsl,has-rstcr;
+               #sleep-cells = <1>;
+               fsl,liodn-bits = <12>;
+       };
+
+       pins: global-utilities@e0e00 {
+               compatible = "fsl,qoriq-pin-control-1.0";
+               reg = <0xe0e00 0x200>;
+               #sleep-cells = <2>;
+       };
+
+       clockgen: global-utilities@e1000 {
+               compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
+               reg = <0xe1000 0x1000>;
+               clock-frequency = <0>;
+       };
+
+       rcpm: global-utilities@e2000 {
+               compatible = "fsl,qoriq-rcpm-1.0";
+               reg = <0xe2000 0x1000>;
+               #sleep-cells = <1>;
+       };
+
+       sfp: sfp@e8000 {
+               compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
+               reg        = <0xe8000 0x1000>;
+       };
+
+       serdes: serdes@ea000 {
+               compatible = "fsl,p3060-serdes";
+               reg        = <0xea000 0x1000>;
+       };
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+       spi@110000 {
+               fsl,espi-num-chipselects = <4>;
+       };
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+/include/ "qoriq-usb2-dr-0.dtsi"
+/include/ "qoriq-sec4.1-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi
new file mode 100644 (file)
index 0000000..00c8e70
--- /dev/null
@@ -0,0 +1,125 @@
+/*
+ * P3060 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+       compatible = "fsl,P3060";
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       aliases {
+               ccsr = &soc;
+               dcsr = &dcsr;
+
+               serial0 = &serial0;
+               serial1 = &serial1;
+               serial2 = &serial2;
+               serial3 = &serial3;
+               pci0 = &pci0;
+               pci1 = &pci1;
+               usb0 = &usb0;
+               usb1 = &usb1;
+               dma0 = &dma0;
+               dma1 = &dma1;
+               msi0 = &msi0;
+               msi1 = &msi1;
+               msi2 = &msi2;
+
+               crypto = &crypto;
+               sec_jr0 = &sec_jr0;
+               sec_jr1 = &sec_jr1;
+               sec_jr2 = &sec_jr2;
+               sec_jr3 = &sec_jr3;
+               rtic_a = &rtic_a;
+               rtic_b = &rtic_b;
+               rtic_c = &rtic_c;
+               rtic_d = &rtic_d;
+               sec_mon = &sec_mon;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: PowerPC,e500mc@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       next-level-cache = <&L2_0>;
+                       L2_0: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu1: PowerPC,e500mc@1 {
+                       device_type = "cpu";
+                       reg = <1>;
+                       next-level-cache = <&L2_1>;
+                       L2_1: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu4: PowerPC,e500mc@4 {
+                       device_type = "cpu";
+                       reg = <4>;
+                       next-level-cache = <&L2_4>;
+                       L2_4: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu5: PowerPC,e500mc@5 {
+                       device_type = "cpu";
+                       reg = <5>;
+                       next-level-cache = <&L2_5>;
+                       L2_5: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu6: PowerPC,e500mc@6 {
+                       device_type = "cpu";
+                       reg = <6>;
+                       next-level-cache = <&L2_6>;
+                       L2_6: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu7: PowerPC,e500mc@7 {
+                       device_type = "cpu";
+                       reg = <7>;
+                       next-level-cache = <&L2_7>;
+                       L2_7: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+       };
+};
index 08b9193213e7d0a95c62c13a3bf506debe65694e..529042e4b9a22427577bc99211b9582a1f260aae 100644 (file)
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p3060si.dtsi"
+/include/ "fsl/p3060si-pre.dtsi"
 
 / {
        model = "fsl,P3060QDS";
@@ -50,6 +50,8 @@
        };
 
        soc: soc@ffe000000 {
+               ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+               reg = <0xf 0xfe000000 0 0x00001000>;
                spi@110000 {
                        flash@0 {
                                #address-cells = <1>;
                };
        };
 
-       rapidio@ffe0c0000 {
+       rio: rapidio@ffe0c0000 {
                reg = <0xf 0xfe0c0000 0 0x11000>;
 
                port1 {
                };
        };
 
-       localbus@ffe124000 {
+       lbc: localbus@ffe124000 {
                reg = <0xf 0xfe124000 0 0x1000>;
                ranges = <0 0 0xf 0xe8000000 0x08000000
                          2 0 0xf 0xffa00000 0x00040000
                reg = <0xf 0xfe200000 0 0x1000>;
                ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
                          0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+               fsl,msi = <&msi0>;
                pcie@0 {
                        ranges = <0x02000000 0 0xe0000000
                                  0x02000000 0 0xe0000000
                reg = <0xf 0xfe201000 0 0x1000>;
                ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
                          0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+               fsl,msi = <&msi1>;
                pcie@0 {
                        ranges = <0x02000000 0 0xe0000000
                                  0x02000000 0 0xe0000000
                };
        };
 };
+
+/include/ "fsl/p3060si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p3060si.dtsi b/arch/powerpc/boot/dts/p3060si.dtsi
deleted file mode 100644 (file)
index 68947e1..0000000
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * P3060 Silicon Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/ {
-       compatible = "fsl,P3060";
-       #address-cells = <2>;
-       #size-cells = <2>;
-       interrupt-parent = <&mpic>;
-
-       aliases {
-               ccsr = &soc;
-               dcsr = &dcsr;
-
-               serial0 = &serial0;
-               serial1 = &serial1;
-               serial2 = &serial2;
-               serial3 = &serial3;
-               pci0 = &pci0;
-               pci1 = &pci1;
-               usb0 = &usb0;
-               usb1 = &usb1;
-               dma0 = &dma0;
-               dma1 = &dma1;
-               msi0 = &msi0;
-               msi1 = &msi1;
-               msi2 = &msi2;
-
-               crypto = &crypto;
-               sec_jr0 = &sec_jr0;
-               sec_jr1 = &sec_jr1;
-               sec_jr2 = &sec_jr2;
-               sec_jr3 = &sec_jr3;
-               rtic_a = &rtic_a;
-               rtic_b = &rtic_b;
-               rtic_c = &rtic_c;
-               rtic_d = &rtic_d;
-               sec_mon = &sec_mon;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu0: PowerPC,e500mc@0 {
-                       device_type = "cpu";
-                       reg = <0>;
-                       next-level-cache = <&L2_0>;
-                       L2_0: l2-cache {
-                               next-level-cache = <&cpc>;
-                       };
-               };
-               cpu1: PowerPC,e500mc@1 {
-                       device_type = "cpu";
-                       reg = <1>;
-                       next-level-cache = <&L2_1>;
-                       L2_1: l2-cache {
-                               next-level-cache = <&cpc>;
-                       };
-               };
-               cpu4: PowerPC,e500mc@4 {
-                       device_type = "cpu";
-                       reg = <4>;
-                       next-level-cache = <&L2_4>;
-                       L2_4: l2-cache {
-                               next-level-cache = <&cpc>;
-                       };
-               };
-               cpu5: PowerPC,e500mc@5 {
-                       device_type = "cpu";
-                       reg = <5>;
-                       next-level-cache = <&L2_5>;
-                       L2_5: l2-cache {
-                               next-level-cache = <&cpc>;
-                       };
-               };
-               cpu6: PowerPC,e500mc@6 {
-                       device_type = "cpu";
-                       reg = <6>;
-                       next-level-cache = <&L2_6>;
-                       L2_6: l2-cache {
-                               next-level-cache = <&cpc>;
-                       };
-               };
-               cpu7: PowerPC,e500mc@7 {
-                       device_type = "cpu";
-                       reg = <7>;
-                       next-level-cache = <&L2_7>;
-                       L2_7: l2-cache {
-                               next-level-cache = <&cpc>;
-                       };
-               };
-       };
-
-       dcsr: dcsr@f00000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "fsl,dcsr", "simple-bus";
-
-               dcsr-epu@0 {
-                       compatible = "fsl,dcsr-epu";
-                       interrupts = <52 2 0 0
-                                     84 2 0 0
-                                     85 2 0 0>;
-                       interrupt-parent = <&mpic>;
-                       reg = <0x0 0x1000>;
-               };
-               dcsr-npc {
-                       compatible = "fsl,dcsr-npc";
-                       reg = <0x1000 0x1000 0x1000000 0x8000>;
-               };
-               dcsr-nxc@2000 {
-                       compatible = "fsl,dcsr-nxc";
-                       reg = <0x2000 0x1000>;
-               };
-               dcsr-corenet {
-                       compatible = "fsl,dcsr-corenet";
-                       reg = <0x8000 0x1000 0xB0000 0x1000>;
-               };
-               dcsr-dpaa@9000 {
-                       compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
-                       reg = <0x9000 0x1000>;
-               };
-               dcsr-ocn@11000 {
-                       compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
-                       reg = <0x11000 0x1000>;
-               };
-               dcsr-ddr@12000 {
-                       compatible = "fsl,dcsr-ddr";
-                       dev-handle = <&ddr>;
-                       reg = <0x12000 0x1000>;
-               };
-               dcsr-nal@18000 {
-                       compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
-                       reg = <0x18000 0x1000>;
-               };
-               dcsr-rcpm@22000 {
-                       compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
-                       reg = <0x22000 0x1000>;
-               };
-               dcsr-cpu-sb-proxy@40000 {
-                       compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-                       cpu-handle = <&cpu0>;
-                       reg = <0x40000 0x1000>;
-               };
-               dcsr-cpu-sb-proxy@41000 {
-                       compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-                       cpu-handle = <&cpu1>;
-                       reg = <0x41000 0x1000>;
-               };
-               dcsr-cpu-sb-proxy@44000 {
-                       compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-                       cpu-handle = <&cpu4>;
-                       reg = <0x44000 0x1000>;
-               };
-               dcsr-cpu-sb-proxy@45000 {
-                       compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-                       cpu-handle = <&cpu5>;
-                       reg = <0x45000 0x1000>;
-               };
-               dcsr-cpu-sb-proxy@46000 {
-                       compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-                       cpu-handle = <&cpu6>;
-                       reg = <0x46000 0x1000>;
-               };
-               dcsr-cpu-sb-proxy@47000 {
-                       compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-                       cpu-handle = <&cpu7>;
-                       reg = <0x47000 0x1000>;
-               };
-       };
-
-       soc: soc@ffe000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               device_type = "soc";
-               compatible = "simple-bus";
-               ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-               reg = <0xf 0xfe000000 0 0x00001000>;
-
-               soc-sram-error {
-                       compatible = "fsl,soc-sram-error";
-                       interrupts = <16 2 1 29>;
-               };
-
-               corenet-law@0 {
-                       compatible = "fsl,corenet-law";
-                       reg = <0x0 0x1000>;
-                       fsl,num-laws = <32>;
-               };
-
-               ddr: memory-controller@8000 {
-                       compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
-                       reg = <0x8000 0x1000>;
-                       interrupts = <16 2 1 23>;
-               };
-
-               cpc: l3-cache-controller@10000 {
-                       compatible = "fsl,p3060-l3-cache-controller", "cache";
-                       reg = <0x10000 0x1000
-                              0x11000 0x1000>;
-                       interrupts = <16 2 1 27>;
-               };
-
-               corenet-cf@18000 {
-                       compatible = "fsl,corenet-cf";
-                       reg = <0x18000 0x1000>;
-                       interrupts = <16 2 1 31>;
-                       fsl,ccf-num-csdids = <32>;
-                       fsl,ccf-num-snoopids = <32>;
-               };
-
-               iommu@20000 {
-                       compatible = "fsl,pamu-v1.0", "fsl,pamu";
-                       reg = <0x20000 0x5000>;
-                       interrupts = <
-                               24 2 0 0
-                               16 2 1 30>;
-               };
-
-               mpic: pic@40000 {
-                       clock-frequency = <0>;
-                       interrupt-controller;
-                       #address-cells = <0>;
-                       #interrupt-cells = <4>;
-                       reg = <0x40000 0x40000>;
-                       compatible = "fsl,mpic", "chrp,open-pic";
-                       device_type = "open-pic";
-               };
-
-               msi0: msi@41600 {
-                       compatible = "fsl,mpic-msi";
-                       reg = <0x41600 0x200>;
-                       msi-available-ranges = <0 0x100>;
-                       interrupts = <
-                               0xe0 0 0 0
-                               0xe1 0 0 0
-                               0xe2 0 0 0
-                               0xe3 0 0 0
-                               0xe4 0 0 0
-                               0xe5 0 0 0
-                               0xe6 0 0 0
-                               0xe7 0 0 0>;
-               };
-
-               msi1: msi@41800 {
-                       compatible = "fsl,mpic-msi";
-                       reg = <0x41800 0x200>;
-                       msi-available-ranges = <0 0x100>;
-                       interrupts = <
-                               0xe8 0 0 0
-                               0xe9 0 0 0
-                               0xea 0 0 0
-                               0xeb 0 0 0
-                               0xec 0 0 0
-                               0xed 0 0 0
-                               0xee 0 0 0
-                               0xef 0 0 0>;
-               };
-
-               msi2: msi@41a00 {
-                       compatible = "fsl,mpic-msi";
-                       reg = <0x41a00 0x200>;
-                       msi-available-ranges = <0 0x100>;
-                       interrupts = <
-                               0xf0 0 0 0
-                               0xf1 0 0 0
-                               0xf2 0 0 0
-                               0xf3 0 0 0
-                               0xf4 0 0 0
-                               0xf5 0 0 0
-                               0xf6 0 0 0
-                               0xf7 0 0 0>;
-               };
-
-               rmu: rmu@d3000 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       compatible = "fsl,srio-rmu";
-                       reg = <0xd3000 0x500>;
-                       ranges = <0x0 0xd3000 0x500>;
-
-                       message-unit@0 {
-                               compatible = "fsl,srio-msg-unit";
-                               reg = <0x0 0x100>;
-                               interrupts = <
-                                       60 2 0 0  /* msg1_tx_irq */
-                                       61 2 0 0>;/* msg1_rx_irq */
-                       };
-                       message-unit@100 {
-                               compatible = "fsl,srio-msg-unit";
-                               reg = <0x100 0x100>;
-                               interrupts = <
-                                       62 2 0 0  /* msg2_tx_irq */
-                                       63 2 0 0>;/* msg2_rx_irq */
-                       };
-                       doorbell-unit@400 {
-                               compatible = "fsl,srio-dbell-unit";
-                               reg = <0x400 0x80>;
-                               interrupts = <
-                                       56 2 0 0  /* bell_outb_irq */
-                                       57 2 0 0>;/* bell_inb_irq */
-                       };
-                       port-write-unit@4e0 {
-                               compatible = "fsl,srio-port-write-unit";
-                               reg = <0x4e0 0x20>;
-                               interrupts = <16 2 1 11>;
-                       };
-               };
-
-               guts: global-utilities@e0000 {
-                       compatible = "fsl,qoriq-device-config-1.0";
-                       reg = <0xe0000 0xe00>;
-                       fsl,has-rstcr;
-                       #sleep-cells = <1>;
-                       fsl,liodn-bits = <12>;
-               };
-
-               pins: global-utilities@e0e00 {
-                       compatible = "fsl,qoriq-pin-control-1.0";
-                       reg = <0xe0e00 0x200>;
-                       #sleep-cells = <2>;
-               };
-
-               clockgen: global-utilities@e1000 {
-                       compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
-                       reg = <0xe1000 0x1000>;
-                       clock-frequency = <0>;
-               };
-
-               rcpm: global-utilities@e2000 {
-                       compatible = "fsl,qoriq-rcpm-1.0";
-                       reg = <0xe2000 0x1000>;
-                       #sleep-cells = <1>;
-               };
-
-               sfp: sfp@e8000 {
-                       compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
-                       reg        = <0xe8000 0x1000>;
-               };
-
-               serdes: serdes@ea000 {
-                       compatible = "fsl,p3060-serdes";
-                       reg        = <0xea000 0x1000>;
-               };
-
-               dma0: dma@100300 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
-                       reg = <0x100300 0x4>;
-                       ranges = <0x0 0x100100 0x200>;
-                       cell-index = <0>;
-                       dma-channel@0 {
-                               compatible = "fsl,p3060-dma-channel",
-                                               "fsl,eloplus-dma-channel";
-                               reg = <0x0 0x80>;
-                               cell-index = <0>;
-                               interrupts = <28 2 0 0>;
-                       };
-                       dma-channel@80 {
-                               compatible = "fsl,p3060-dma-channel",
-                                               "fsl,eloplus-dma-channel";
-                               reg = <0x80 0x80>;
-                               cell-index = <1>;
-                               interrupts = <29 2 0 0>;
-                       };
-                       dma-channel@100 {
-                               compatible = "fsl,p3060-dma-channel",
-                                               "fsl,eloplus-dma-channel";
-                               reg = <0x100 0x80>;
-                               cell-index = <2>;
-                               interrupts = <30 2 0 0>;
-                       };
-                       dma-channel@180 {
-                               compatible = "fsl,p3060-dma-channel",
-                                               "fsl,eloplus-dma-channel";
-                               reg = <0x180 0x80>;
-                               cell-index = <3>;
-                               interrupts = <31 2 0 0>;
-                       };
-               };
-
-               dma1: dma@101300 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       compatible = "fsl,p3060-dma", "fsl,eloplus-dma";
-                       reg = <0x101300 0x4>;
-                       ranges = <0x0 0x101100 0x200>;
-                       cell-index = <1>;
-                       dma-channel@0 {
-                               compatible = "fsl,p3060-dma-channel",
-                                               "fsl,eloplus-dma-channel";
-                               reg = <0x0 0x80>;
-                               cell-index = <0>;
-                               interrupts = <32 2 0 0>;
-                       };
-                       dma-channel@80 {
-                               compatible = "fsl,p3060-dma-channel",
-                                               "fsl,eloplus-dma-channel";
-                               reg = <0x80 0x80>;
-                               cell-index = <1>;
-                               interrupts = <33 2 0 0>;
-                       };
-                       dma-channel@100 {
-                               compatible = "fsl,p3060-dma-channel",
-                                               "fsl,eloplus-dma-channel";
-                               reg = <0x100 0x80>;
-                               cell-index = <2>;
-                               interrupts = <34 2 0 0>;
-                       };
-                       dma-channel@180 {
-                               compatible = "fsl,p3060-dma-channel",
-                                               "fsl,eloplus-dma-channel";
-                               reg = <0x180 0x80>;
-                               cell-index = <3>;
-                               interrupts = <35 2 0 0>;
-                       };
-               };
-
-               spi@110000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "fsl,p3060-espi", "fsl,mpc8536-espi";
-                       reg = <0x110000 0x1000>;
-                       interrupts = <53 0x2 0 0>;
-                       fsl,espi-num-chipselects = <4>;
-               };
-
-               i2c@118000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       cell-index = <0>;
-                       compatible = "fsl-i2c";
-                       reg = <0x118000 0x100>;
-                       interrupts = <38 2 0 0>;
-                       dfsrr;
-               };
-
-               i2c@118100 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       cell-index = <1>;
-                       compatible = "fsl-i2c";
-                       reg = <0x118100 0x100>;
-                       interrupts = <38 2 0 0>;
-                       dfsrr;
-               };
-
-               i2c@119000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       cell-index = <2>;
-                       compatible = "fsl-i2c";
-                       reg = <0x119000 0x100>;
-                       interrupts = <39 2 0 0>;
-                       dfsrr;
-               };
-
-               i2c@119100 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       cell-index = <3>;
-                       compatible = "fsl-i2c";
-                       reg = <0x119100 0x100>;
-                       interrupts = <39 2 0 0>;
-                       dfsrr;
-               };
-
-               serial0: serial@11c500 {
-                       cell-index = <0>;
-                       device_type = "serial";
-                       compatible = "ns16550";
-                       reg = <0x11c500 0x100>;
-                       clock-frequency = <0>;
-                       interrupts = <36 2 0 0>;
-               };
-
-               serial1: serial@11c600 {
-                       cell-index = <1>;
-                       device_type = "serial";
-                       compatible = "ns16550";
-                       reg = <0x11c600 0x100>;
-                       clock-frequency = <0>;
-                       interrupts = <36 2 0 0>;
-               };
-
-               serial2: serial@11d500 {
-                       cell-index = <2>;
-                       device_type = "serial";
-                       compatible = "ns16550";
-                       reg = <0x11d500 0x100>;
-                       clock-frequency = <0>;
-                       interrupts = <37 2 0 0>;
-               };
-
-               serial3: serial@11d600 {
-                       cell-index = <3>;
-                       device_type = "serial";
-                       compatible = "ns16550";
-                       reg = <0x11d600 0x100>;
-                       clock-frequency = <0>;
-                       interrupts = <37 2 0 0>;
-               };
-
-               gpio0: gpio@130000 {
-                       compatible = "fsl,p3060-gpio", "fsl,qoriq-gpio";
-                       reg = <0x130000 0x1000>;
-                       interrupts = <55 2 0 0>;
-                       #gpio-cells = <2>;
-                       gpio-controller;
-               };
-
-               usb0: usb@210000 {
-                       compatible = "fsl,p3060-usb2-mph",
-                                       "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-                       reg = <0x210000 0x1000>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       interrupts = <44 0x2 0 0>;
-               };
-
-               usb1: usb@211000 {
-                       compatible = "fsl,p3060-usb2-dr",
-                                       "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-                       reg = <0x211000 0x1000>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       interrupts = <45 0x2 0 0>;
-               };
-
-               crypto: crypto@300000 {
-                       compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       reg = <0x300000 0x10000>;
-                       ranges = <0 0x300000 0x10000>;
-                       interrupt-parent = <&mpic>;
-                       interrupts = <92 2 0 0>;
-
-                       sec_jr0: jr@1000 {
-                               compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
-                               reg = <0x1000 0x1000>;
-                               interrupt-parent = <&mpic>;
-                               interrupts = <88 2 0 0>;
-                       };
-
-                       sec_jr1: jr@2000 {
-                               compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
-                               reg = <0x2000 0x1000>;
-                               interrupt-parent = <&mpic>;
-                               interrupts = <89 2 0 0>;
-                       };
-
-                       sec_jr2: jr@3000 {
-                               compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
-                               reg = <0x3000 0x1000>;
-                               interrupt-parent = <&mpic>;
-                               interrupts = <90 2 0 0>;
-                       };
-
-                       sec_jr3: jr@4000 {
-                               compatible = "fsl,sec-v4.1-job-ring", "fsl,sec-v4.0-job-ring";
-                               reg = <0x4000 0x1000>;
-                               interrupt-parent = <&mpic>;
-                               interrupts = <91 2 0 0>;
-                       };
-
-                       rtic@6000 {
-                               compatible = "fsl,sec-v4.1-rtic", "fsl,sec-v4.0-rtic";
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               reg = <0x6000 0x100>;
-                               ranges = <0x0 0x6100 0xe00>;
-
-                               rtic_a: rtic-a@0 {
-                                       compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
-                                       reg = <0x00 0x20 0x100 0x80>;
-                               };
-
-                               rtic_b: rtic-b@20 {
-                                       compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
-                                       reg = <0x20 0x20 0x200 0x80>;
-                               };
-
-                               rtic_c: rtic-c@40 {
-                                       compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
-                                       reg = <0x40 0x20 0x300 0x80>;
-                               };
-
-                               rtic_d: rtic-d@60 {
-                                       compatible = "fsl,sec-v4.1-rtic-memory", "fsl,sec-v4.0-rtic-memory";
-                                       reg = <0x60 0x20 0x500 0x80>;
-                               };
-                       };
-               };
-
-               sec_mon: sec_mon@314000 {
-                       compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
-                       reg = <0x314000 0x1000>;
-                       interrupt-parent = <&mpic>;
-                       interrupts = <93 2 0 0>;
-               };
-       };
-
-       rapidio@ffe0c0000 {
-               compatible = "fsl,srio";
-               interrupts = <16 2 1 11>;
-               #address-cells = <2>;
-               #size-cells = <2>;
-               fsl,srio-rmu-handle = <&rmu>;
-               ranges;
-
-               port1 {
-                       #address-cells = <2>;
-                       #size-cells = <2>;
-                       cell-index = <1>;
-               };
-
-               port2 {
-                       #address-cells = <2>;
-                       #size-cells = <2>;
-                       cell-index = <2>;
-               };
-       };
-
-       localbus@ffe124000 {
-               compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
-               interrupts = <25 2 0 0>;
-               #address-cells = <2>;
-               #size-cells = <1>;
-       };
-
-       pci0: pcie@ffe200000 {
-               compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
-               device_type = "pci";
-               #size-cells = <2>;
-               #address-cells = <3>;
-               bus-range = <0x0 0xff>;
-               clock-frequency = <33333333>;
-               fsl,msi = <&msi0>;
-               interrupts = <16 2 1 15>;
-               pcie@0 {
-                       reg = <0 0 0 0 0>;
-                       #interrupt-cells = <1>;
-                       #size-cells = <2>;
-                       #address-cells = <3>;
-                       device_type = "pci";
-                       interrupts = <16 2 1 15>;
-                       interrupt-map-mask = <0xf800 0 0 7>;
-                       interrupt-map = <
-                               /* IDSEL 0x0 */
-                               0000 0 0 1 &mpic 40 1 0 0
-                               0000 0 0 2 &mpic 1 1 0 0
-                               0000 0 0 3 &mpic 2 1 0 0
-                               0000 0 0 4 &mpic 3 1 0 0
-                               >;
-               };
-       };
-
-       pci1: pcie@ffe201000 {
-               compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
-               device_type = "pci";
-               #size-cells = <2>;
-               #address-cells = <3>;
-               bus-range = <0 0xff>;
-               clock-frequency = <33333333>;
-               fsl,msi = <&msi1>;
-               interrupts = <16 2 1 14>;
-               pcie@0 {
-                       reg = <0 0 0 0 0>;
-                       #interrupt-cells = <1>;
-                       #size-cells = <2>;
-                       #address-cells = <3>;
-                       device_type = "pci";
-                       interrupts = <16 2 1 14>;
-                       interrupt-map-mask = <0xf800 0 0 7>;
-                       interrupt-map = <
-                               /* IDSEL 0x0 */
-                               0000 0 0 1 &mpic 41 1 0 0
-                               0000 0 0 2 &mpic 5 1 0 0
-                               0000 0 0 3 &mpic 6 1 0 0
-                               0000 0 0 4 &mpic 7 1 0 0
-                               >;
-               };
-       };
-};