static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
-static int mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag);
+static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
static int GetLanConfigPages(MPT_ADAPTER *ioc);
static int GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
static int GetIoUnitPage2(MPT_ADAPTER *ioc);
+int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
static void mpt_timer_expired(unsigned long data);
static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
+static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
+static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
#ifdef CONFIG_PROC_FS
static int procmpt_summary_read(char *buf, char **start, off_t offset,
pCfg->wait_done = 1;
wake_up(&mpt_waitq);
}
+ } else if (func == MPI_FUNCTION_SAS_IO_UNIT_CONTROL) {
+ /* we should be always getting a reply frame */
+ memcpy(ioc->persist_reply_frame, reply,
+ min(MPT_DEFAULT_FRAME_SIZE,
+ 4*reply->u.reply.MsgLength));
+ del_timer(&ioc->persist_timer);
+ ioc->persist_wait_done = 1;
+ wake_up(&mpt_waitq);
} else {
printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
ioc->name, func);
mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
u.frame.linkage.list);
list_del(&mf->u.frame.linkage.list);
+ mf->u.frame.linkage.arg1 = 0;
mf->u.frame.hwhdr.msgctxu.fld.cb_idx = handle; /* byte */
req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
/* u16! */
/* Put Request back on FreeQ! */
spin_lock_irqsave(&ioc->FreeQlock, flags);
+ mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */
list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
#ifdef MFCNT
ioc->mfcnt--;
/* Make sure there are no doorbells */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
-
+
return r;
}
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_host_page_access_control - provides mechanism for the host
+ * driver to control the IOC's Host Page Buffer access.
+ * @ioc: Pointer to MPT adapter structure
+ * @access_control_value: define bits below
+ *
+ * Access Control Value - bits[15:12]
+ * 0h Reserved
+ * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
+ * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
+ * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+
+static int
+mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
+{
+ int r = 0;
+
+ /* return if in use */
+ if (CHIPREG_READ32(&ioc->chip->Doorbell)
+ & MPI_DOORBELL_ACTIVE)
+ return -1;
+
+ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+
+ CHIPREG_WRITE32(&ioc->chip->Doorbell,
+ ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
+ <<MPI_DOORBELL_FUNCTION_SHIFT) |
+ (access_control_value<<12)));
+
+ /* Wait for IOC to clear Doorbell Status bit */
+ if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
+ return -2;
+ }else
+ return 0;
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_host_page_alloc - allocate system memory for the fw
+ * If we already allocated memory in past, then resend the same pointer.
+ * ioc@: Pointer to pointer to IOC adapter
+ * ioc_init@: Pointer to ioc init config page
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
+{
+ char *psge;
+ int flags_length;
+ u32 host_page_buffer_sz=0;
+
+ if(!ioc->HostPageBuffer) {
+
+ host_page_buffer_sz =
+ le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
+
+ if(!host_page_buffer_sz)
+ return 0; /* fw doesn't need any host buffers */
+
+ /* spin till we get enough memory */
+ while(host_page_buffer_sz > 0) {
+
+ if((ioc->HostPageBuffer = pci_alloc_consistent(
+ ioc->pcidev,
+ host_page_buffer_sz,
+ &ioc->HostPageBuffer_dma)) != NULL) {
+
+ dinitprintk((MYIOC_s_INFO_FMT
+ "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
+ ioc->name,
+ ioc->HostPageBuffer,
+ ioc->HostPageBuffer_dma,
+ hst_page_buffer_sz));
+ ioc->alloc_total += host_page_buffer_sz;
+ ioc->HostPageBuffer_sz = host_page_buffer_sz;
+ break;
+ }
+
+ host_page_buffer_sz -= (4*1024);
+ }
+ }
+
+ if(!ioc->HostPageBuffer) {
+ printk(MYIOC_s_ERR_FMT
+ "Failed to alloc memory for host_page_buffer!\n",
+ ioc->name);
+ return -999;
+ }
+
+ psge = (char *)&ioc_init->HostPageBufferSGE;
+ flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+ MPI_SGE_FLAGS_32_BIT_ADDRESSING |
+ MPI_SGE_FLAGS_HOST_TO_IOC |
+ MPI_SGE_FLAGS_END_OF_BUFFER;
+ if (sizeof(dma_addr_t) == sizeof(u64)) {
+ flags_length |= MPI_SGE_FLAGS_64_BIT_ADDRESSING;
+ }
+ flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
+ flags_length |= ioc->HostPageBuffer_sz;
+ mpt_add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
+ ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
+
+return 0;
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_verify_adapter - Given a unique IOC identifier, set pointer to
ioc->prod_name = "LSI53C1035";
ioc->bus_type = SCSI;
}
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064) {
+ ioc->prod_name = "LSISAS1064";
+ ioc->bus_type = SAS;
+ ioc->errata_flag_1064 = 1;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066) {
+ ioc->prod_name = "LSISAS1066";
+ ioc->bus_type = SAS;
+ ioc->errata_flag_1064 = 1;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068) {
+ ioc->prod_name = "LSISAS1068";
+ ioc->bus_type = SAS;
+ ioc->errata_flag_1064 = 1;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1064E) {
+ ioc->prod_name = "LSISAS1064E";
+ ioc->bus_type = SAS;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1066E) {
+ ioc->prod_name = "LSISAS1066E";
+ ioc->bus_type = SAS;
+ }
+ else if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1068E) {
+ ioc->prod_name = "LSISAS1068E";
+ ioc->bus_type = SAS;
+ }
if (ioc->errata_flag_1064)
pci_disable_io_access(pdev);
* and we try GetLanConfigPages again...
*/
if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
- if (ioc->bus_type == FC) {
+ if (ioc->bus_type == SAS) {
+
+ /* clear persistency table */
+ if(ioc->facts.IOCExceptions &
+ MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
+ ret = mptbase_sas_persist_operation(ioc,
+ MPI_SAS_OP_CLEAR_NOT_PRESENT);
+ if(ret != 0)
+ return -1;
+ }
+
+ /* Find IM volumes
+ */
+ mpt_findImVolumes(ioc);
+
+ } else if (ioc->bus_type == FC) {
/*
* Pre-fetch FC port WWN and stuff...
* (FCPortPage0_t stuff)
if (ioc->cached_fw != NULL) {
ddlprintk((KERN_INFO MYNAM ": mpt_adapter_disable: Pushing FW onto adapter\n"));
- if ((ret = mpt_downloadboot(ioc, NO_SLEEP)) < 0) {
+ if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)ioc->cached_fw, NO_SLEEP)) < 0) {
printk(KERN_WARNING MYNAM
": firmware downloadboot failure (%d)!\n", ret);
}
kfree(ioc->ChainToChain);
ioc->ChainToChain = NULL;
+
+ if (ioc->HostPageBuffer != NULL) {
+ if((ret = mpt_host_page_access_control(ioc,
+ MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
+ printk(KERN_ERR MYNAM
+ ": %s: host page buffers free failed (%d)!\n",
+ __FUNCTION__, ret);
+ }
+ dexitprintk((KERN_INFO MYNAM ": %s HostPageBuffer free @ %p, sz=%d bytes\n",
+ ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz));
+ pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
+ ioc->HostPageBuffer,
+ ioc->HostPageBuffer_dma);
+ ioc->HostPageBuffer = NULL;
+ ioc->HostPageBuffer_sz = 0;
+ ioc->alloc_total -= ioc->HostPageBuffer_sz;
+ }
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
* Loop here waiting for IOC to come READY.
*/
ii = 0;
- cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
+ cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
le32_to_cpu(facts->CurrentSenseBufferHighAddr);
facts->CurReplyFrameSize =
le16_to_cpu(facts->CurReplyFrameSize);
+ facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
/*
* Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
ddlprintk((MYIOC_s_INFO_FMT "upload_fw %d facts.Flags=%x\n",
ioc->name, ioc->upload_fw, ioc->facts.Flags));
- if (ioc->bus_type == FC)
+ if(ioc->bus_type == SAS)
+ ioc_init.MaxDevices = ioc->facts.MaxDevices;
+ else if(ioc->bus_type == FC)
ioc_init.MaxDevices = MPT_MAX_FC_DEVICES;
else
ioc_init.MaxDevices = MPT_MAX_SCSI_DEVICES;
-
ioc_init.MaxBuses = MPT_MAX_BUS;
-
+ dinitprintk((MYIOC_s_INFO_FMT "facts.MsgVersion=%x\n",
+ ioc->name, ioc->facts.MsgVersion));
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
+ // set MsgVersion and HeaderVersion host driver was built with
+ ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
+ ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
+
+ if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
+ ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
+ } else if(mpt_host_page_alloc(ioc, &ioc_init))
+ return -99;
+ }
ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
if (sizeof(dma_addr_t) == sizeof(u64)) {
ioc_init.HostMfaHighAddr = cpu_to_le32(0);
ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
}
-
+
ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
+ ioc->facts.MaxDevices = ioc_init.MaxDevices;
+ ioc->facts.MaxBuses = ioc_init.MaxBuses;
dhsprintk((MYIOC_s_INFO_FMT "Sending IOCInit (req @ %p)\n",
ioc->name, &ioc_init));
r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
- if (r != 0)
+ if (r != 0) {
+ printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
return r;
+ }
/* No need to byte swap the multibyte fields in the reply
* since we don't even look at it's contents.
{
PortEnable_t port_enable;
MPIDefaultReply_t reply_buf;
- int ii;
+ int rc;
int req_sz;
int reply_sz;
/* RAID FW may take a long time to enable
*/
- if (ioc->bus_type == FC) {
- ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
- reply_sz, (u16*)&reply_buf, 65 /*seconds*/, sleepFlag);
- } else {
- ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
+ if ( (ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
+ > MPI_FW_HEADER_PID_PROD_TARGET_SCSI ) {
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
reply_sz, (u16*)&reply_buf, 300 /*seconds*/, sleepFlag);
+ } else {
+ rc = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&port_enable,
+ reply_sz, (u16*)&reply_buf, 30 /*seconds*/, sleepFlag);
}
-
- if (ii != 0)
- return ii;
-
- /* We do not even look at the reply, so we need not
- * swap the multi-byte fields.
- */
-
- return 0;
+ return rc;
}
/*
* <0 for fw upload failure.
*/
static int
-mpt_downloadboot(MPT_ADAPTER *ioc, int sleepFlag)
+mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
{
- MpiFwHeader_t *pFwHeader;
MpiExtImageHeader_t *pExtImage;
u32 fwSize;
u32 diag0val;
u32 load_addr;
u32 ioc_state=0;
- ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x, ioc FW Ptr %p\n",
- ioc->name, ioc->facts.FWImageSize, ioc->cached_fw));
-
- if ( ioc->facts.FWImageSize == 0 )
- return -1;
-
- if (ioc->cached_fw == NULL)
- return -2;
-
- /* prevent a second downloadboot and memory free with alt_ioc */
- if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
- ioc->alt_ioc->cached_fw = NULL;
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
+ ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
ioc->name, count));
break;
}
- /* wait 1 sec */
+ /* wait .1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep_interruptible (100);
} else {
- mdelay (1000);
+ mdelay (100);
}
}
if ( count == 30 ) {
- ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! Unable to RESET_ADAPTER diag0val=%x\n",
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot failed! "
+ "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
ioc->name, diag0val));
return -3;
}
/* Set the DiagRwEn and Disable ARM bits */
CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
- pFwHeader = (MpiFwHeader_t *) ioc->cached_fw;
fwSize = (pFwHeader->ImageSize + 3)/4;
ptrFw = (u32 *) pFwHeader;
/* Clear the internal flash bad bit - autoincrementing register,
* so must do two writes.
*/
- CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
- diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
- diagRwData |= 0x4000000;
- CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
- CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
+ if (ioc->bus_type == SCSI) {
+ /*
+ * 1030 and 1035 H/W errata, workaround to access
+ * the ClearFlashBadSignatureBit
+ */
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
+ diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
+ diagRwData |= 0x40000000;
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
+ CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
+
+ } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
+ diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
+ CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
+ MPI_DIAG_CLEAR_FLASH_BAD_SIG);
+
+ /* wait 1 msec */
+ if (sleepFlag == CAN_SLEEP) {
+ msleep_interruptible (1);
+ } else {
+ mdelay (1);
+ }
+ }
if (ioc->errata_flag_1064)
pci_disable_io_access(ioc->pcidev);
diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
- ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, turning off PREVENT_IOC_BOOT, DISABLE_ARM\n",
+ ddlprintk((MYIOC_s_INFO_FMT "downloadboot diag0val=%x, "
+ "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
ioc->name, diag0val));
- diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM);
+ diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
ddlprintk((MYIOC_s_INFO_FMT "downloadboot now diag0val=%x\n",
ioc->name, diag0val));
CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
/* Write 0xFF to reset the sequencer */
CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
+ if (ioc->bus_type == SAS) {
+ ioc_state = mpt_GetIocState(ioc, 0);
+ if ( (GetIocFacts(ioc, sleepFlag,
+ MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
+ ddlprintk((MYIOC_s_INFO_FMT "GetIocFacts failed: IocState=%x\n",
+ ioc->name, ioc_state));
+ return -EFAULT;
+ }
+ }
+
for (count=0; count<HZ*20; count++) {
if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
ddlprintk((MYIOC_s_INFO_FMT "downloadboot successful! (count=%d) IocState=%x\n",
ioc->name, count, ioc_state));
+ if (ioc->bus_type == SAS) {
+ return 0;
+ }
if ((SendIocInit(ioc, sleepFlag)) != 0) {
ddlprintk((MYIOC_s_INFO_FMT "downloadboot: SendIocInit failed\n",
ioc->name));
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
- ssleep(1);
+ msleep_interruptible (1000);
} else {
mdelay (1000);
}
}
- if ((count = mpt_downloadboot(ioc, sleepFlag)) < 0) {
+ if ((count = mpt_downloadboot(ioc,
+ (MpiFwHeader_t *)ioc->cached_fw, sleepFlag)) < 0) {
printk(KERN_WARNING MYNAM
": firmware downloadboot failure (%d)!\n", count);
}
return rc;
}
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mptbase_sas_persist_operation - Perform operation on SAS Persitent Table
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sas_address: 64bit SAS Address for operation.
+ * @target_id: specified target for operation
+ * @bus: specified bus for operation
+ * @persist_opcode: see below
+ *
+ * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
+ * devices not currently present.
+ * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
+ *
+ * NOTE: Don't use not this function during interrupt time.
+ *
+ * Returns: 0 for success, non-zero error
+ */
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+int
+mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
+{
+ SasIoUnitControlRequest_t *sasIoUnitCntrReq;
+ SasIoUnitControlReply_t *sasIoUnitCntrReply;
+ MPT_FRAME_HDR *mf = NULL;
+ MPIHeader_t *mpi_hdr;
+
+
+ /* insure garbage is not sent to fw */
+ switch(persist_opcode) {
+
+ case MPI_SAS_OP_CLEAR_NOT_PRESENT:
+ case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
+ break;
+
+ default:
+ return -1;
+ break;
+ }
+
+ printk("%s: persist_opcode=%x\n",__FUNCTION__, persist_opcode);
+
+ /* Get a MF for this command.
+ */
+ if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
+ printk("%s: no msg frames!\n",__FUNCTION__);
+ return -1;
+ }
+
+ mpi_hdr = (MPIHeader_t *) mf;
+ sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
+ memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
+ sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
+ sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
+ sasIoUnitCntrReq->Operation = persist_opcode;
+
+ init_timer(&ioc->persist_timer);
+ ioc->persist_timer.data = (unsigned long) ioc;
+ ioc->persist_timer.function = mpt_timer_expired;
+ ioc->persist_timer.expires = jiffies + HZ*10 /* 10 sec */;
+ ioc->persist_wait_done=0;
+ add_timer(&ioc->persist_timer);
+ mpt_put_msg_frame(mpt_base_index, ioc, mf);
+ wait_event(mpt_waitq, ioc->persist_wait_done);
+
+ sasIoUnitCntrReply =
+ (SasIoUnitControlReply_t *)ioc->persist_reply_frame;
+ if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
+ printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
+ __FUNCTION__,
+ sasIoUnitCntrReply->IOCStatus,
+ sasIoUnitCntrReply->IOCLogInfo);
+ return -1;
+ }
+
+ printk("%s: success\n",__FUNCTION__);
+ return 0;
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* GetIoUnitPage2 - Retrieve BIOS version and boot order information.
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static char *
-EventDescriptionStr(u8 event, u32 evData0)
+static void
+EventDescriptionStr(u8 event, u32 evData0, char *evStr)
{
char *ds;
ds = "Events(OFF) Change";
break;
case MPI_EVENT_INTEGRATED_RAID:
- ds = "Integrated Raid";
+ {
+ u8 ReasonCode = (u8)(evData0 >> 16);
+ switch (ReasonCode) {
+ case MPI_EVENT_RAID_RC_VOLUME_CREATED :
+ ds = "Integrated Raid: Volume Created";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_DELETED :
+ ds = "Integrated Raid: Volume Deleted";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
+ ds = "Integrated Raid: Volume Settings Changed";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
+ ds = "Integrated Raid: Volume Status Changed";
+ break;
+ case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
+ ds = "Integrated Raid: Volume Physdisk Changed";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
+ ds = "Integrated Raid: Physdisk Created";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
+ ds = "Integrated Raid: Physdisk Deleted";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
+ ds = "Integrated Raid: Physdisk Settings Changed";
+ break;
+ case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
+ ds = "Integrated Raid: Physdisk Status Changed";
+ break;
+ case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
+ ds = "Integrated Raid: Domain Validation Needed";
+ break;
+ case MPI_EVENT_RAID_RC_SMART_DATA :
+ ds = "Integrated Raid; Smart Data";
+ break;
+ case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
+ ds = "Integrated Raid: Replace Action Started";
+ break;
+ default:
+ ds = "Integrated Raid";
break;
+ }
+ break;
+ }
+ case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
+ ds = "SCSI Device Status Change";
+ break;
+ case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ {
+ u8 ReasonCode = (u8)(evData0 >> 16);
+ switch (ReasonCode) {
+ case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
+ ds = "SAS Device Status Change: Added";
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
+ ds = "SAS Device Status Change: Deleted";
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
+ ds = "SAS Device Status Change: SMART Data";
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
+ ds = "SAS Device Status Change: No Persistancy Added";
+ break;
+ default:
+ ds = "SAS Device Status Change: Unknown";
+ break;
+ }
+ break;
+ }
+ case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
+ ds = "Bus Timer Expired";
+ break;
+ case MPI_EVENT_QUEUE_FULL:
+ ds = "Queue Full";
+ break;
+ case MPI_EVENT_SAS_SES:
+ ds = "SAS SES Event";
+ break;
+ case MPI_EVENT_PERSISTENT_TABLE_FULL:
+ ds = "Persistent Table Full";
+ break;
+ case MPI_EVENT_SAS_PHY_LINK_STATUS:
+ ds = "SAS PHY Link Status";
+ break;
+ case MPI_EVENT_SAS_DISCOVERY_ERROR:
+ ds = "SAS Discovery Error";
+ break;
+
/*
* MPT base "custom" events may be added here...
*/
ds = "Unknown";
break;
}
- return ds;
+ strcpy(evStr,ds);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
int ii;
int r = 0;
int handlers = 0;
- char *evStr;
+ char evStr[100];
u8 event;
/*
evData0 = le32_to_cpu(pEventReply->Data[0]);
}
- evStr = EventDescriptionStr(event, evData0);
+ EventDescriptionStr(event, evData0, evStr);
devtprintk((MYIOC_s_INFO_FMT "MPT event (%s=%02Xh) detected!\n",
ioc->name,
evStr,
* Do general / base driver event processing
*/
switch(event) {
- case MPI_EVENT_NONE: /* 00 */
- case MPI_EVENT_LOG_DATA: /* 01 */
- case MPI_EVENT_STATE_CHANGE: /* 02 */
- case MPI_EVENT_UNIT_ATTENTION: /* 03 */
- case MPI_EVENT_IOC_BUS_RESET: /* 04 */
- case MPI_EVENT_EXT_BUS_RESET: /* 05 */
- case MPI_EVENT_RESCAN: /* 06 */
- case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */
- case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */
- case MPI_EVENT_LOGOUT: /* 09 */
- case MPI_EVENT_INTEGRATED_RAID: /* 0B */
- case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE: /* 0C */
- default:
- break;
case MPI_EVENT_EVENT_CHANGE: /* 0A */
if (evDataLen) {
u8 evState = evData0 & 0xFF;
}
}
break;
+ default:
+ break;
}
/*
EXPORT_SYMBOL(mpt_read_ioc_pg_3);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
EXPORT_SYMBOL(mpt_free_fw_memory);
+EXPORT_SYMBOL(mptbase_sas_persist_operation);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff