i2c-nomadik: break out single messsage transmission

Reduce code size in the message transfer function by factoring out
a single-message transfer function.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index fa7b10639ce24cc8b3528d381dc6098633cc9600..0c731ca69f1506d70b05da8c2d895c6493e4b1f3 100644 (file)
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -524,6 +524,51 @@ static int write_i2c(struct nmk_i2c_dev *dev)
        return status;
 }
 
+/**
+ * nmk_i2c_xfer_one() - transmit a single I2C message
+ * @dev: device with a message encoded into it
+ * @flags: message flags
+ */
+static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
+{
+       int status;
+
+       if (flags & I2C_M_RD) {
+               /* read operation */
+               dev->cli.operation = I2C_READ;
+               status = read_i2c(dev);
+       } else {
+               /* write operation */
+               dev->cli.operation = I2C_WRITE;
+               status = write_i2c(dev);
+       }
+
+       if (status || (dev->result)) {
+               u32 i2c_sr;
+               u32 cause;
+
+               i2c_sr = readl(dev->virtbase + I2C_SR);
+               /*
+                * Check if the controller I2C operation status
+                * is set to ABORT(11b).
+                */
+               if (((i2c_sr >> 2) & 0x3) == 0x3) {
+                       /* get the abort cause */
+                       cause = (i2c_sr >> 4) & 0x7;
+                       dev_err(&dev->pdev->dev, "%s\n", cause
+                               >= ARRAY_SIZE(abort_causes) ?
+                               "unknown reason" :
+                               abort_causes[cause]);
+               }
+
+               (void) init_hw(dev);
+
+               status = status ? status : dev->result;
+       }
+
+       return status;
+}
+
 /**
  * nmk_i2c_xfer() - I2C transfer function used by kernel framework
  * @i2c_adap: Adapter pointer to the controller
@@ -576,9 +621,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 {
        int status;
        int i;
-       u32 cause;
        struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
-       u32 i2c_sr;
        int j;
 
        dev->busy = true;
@@ -593,6 +636,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
        if (status)
                goto out;
 
+       /* Attempt three times to send the message queue */
        for (j = 0; j < 3; j++) {
                /* setup the i2c controller */
                setup_i2c_controller(dev);
@@ -611,37 +655,9 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
                        dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
                        dev->result = 0;
 
-                       if (msgs[i].flags & I2C_M_RD) {
-                               /* it is a read operation */
-                               dev->cli.operation = I2C_READ;
-                               status = read_i2c(dev);
-                       } else {
-                               /* write operation */
-                               dev->cli.operation = I2C_WRITE;
-                               status = write_i2c(dev);
-                       }
-                       if (status || (dev->result)) {
-                               i2c_sr = readl(dev->virtbase + I2C_SR);
-                               /*
-                                * Check if the controller I2C operation status
-                                * is set to ABORT(11b).
-                                */
-                               if (((i2c_sr >> 2) & 0x3) == 0x3) {
-                                       /* get the abort cause */
-                                       cause = (i2c_sr >> 4)
-                                               & 0x7;
-                                       dev_err(&dev->pdev->dev, "%s\n", cause
-                                               >= ARRAY_SIZE(abort_causes) ?
-                                               "unknown reason" :
-                                               abort_causes[cause]);
-                               }
-
-                               (void) init_hw(dev);
-
-                               status = status ? status : dev->result;
-
+                       status = nmk_i2c_xfer_one(dev, msgs[i].flags);
+                       if (status != 0)
                                break;
-                       }
                }
                if (status == 0)
                        break;