[SCSI] 53c700: m68k BVME6000 NCR53C710 SCSI

New driver for the BVME6000 NCR53C710 SCSI controller, using the 53c700 SCSI
core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index da5e888c49d684a518066b24726eb58f9d2b3c00..17a9efe0f6174941e09aab07f7fb1559f93e2a28 100644 (file)
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1008,7 +1008,7 @@ config SCSI_STEX
 
 config 53C700_BE_BUS
        bool
-       depends on M68K
+       depends on BVME6000_SCSI
        default y
 
 config SCSI_SYM53C8XX_2
@@ -1724,8 +1724,8 @@ config MVME16x_SCSI
          will want to say Y to this question.
 
 config BVME6000_SCSI
-       bool "NCR53C710 SCSI driver for BVME6000"
-       depends on BVME6000 && SCSI && BROKEN
+       tristate "NCR53C710 SCSI driver for BVME6000"
+       depends on BVME6000 && SCSI
        select SCSI_SPI_ATTRS
        help
          The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710

diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index cba39679f947943b5cb88acada80a9135c0110b6..77dd63d71c5fb843fb8eb1416e4bc452760cbeca 100644 (file)
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_ATARI_SCSI)      += atari_scsi.o
 obj-$(CONFIG_MAC_SCSI)         += mac_scsi.o
 obj-$(CONFIG_SCSI_MAC_ESP)     += mac_esp.o    NCR53C9x.o
 obj-$(CONFIG_SUN3_SCSI)                += sun3_scsi.o  sun3_scsi_vme.o
+obj-$(CONFIG_BVME6000_SCSI)    += 53c700.o     bvme6000_scsi.o
 obj-$(CONFIG_SCSI_SIM710)      += 53c700.o     sim710.o
 obj-$(CONFIG_SCSI_ADVANSYS)    += advansys.o
 obj-$(CONFIG_SCSI_PSI240I)     += psi240i.o

diff --git a/drivers/scsi/bvme6000_scsi.c b/drivers/scsi/bvme6000_scsi.c
new file mode 100644 (file)
index 0000000..1a79e18
--- /dev/null
+++ b/drivers/scsi/bvme6000_scsi.c
@@ -0,0 +1,135 @@
+/*
+ * Detection routine for the NCR53c710 based BVME6000 SCSI Controllers for Linux.
+ *
+ * Based on work by Alan Hourihane and Kars de Jong
+ *
+ * Rewritten to use 53c700.c by Richard Hirst <richard@sleepie.demon.co.uk>
+ */
+
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/bvme6000hw.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_spi.h>
+
+#include "53c700.h"
+
+MODULE_AUTHOR("Richard Hirst <richard@sleepie.demon.co.uk>");
+MODULE_DESCRIPTION("BVME6000 NCR53C710 driver");
+MODULE_LICENSE("GPL");
+
+static struct scsi_host_template bvme6000_scsi_driver_template = {
+       .name                   = "BVME6000 NCR53c710 SCSI",
+       .proc_name              = "BVME6000",
+       .this_id                = 7,
+       .module                 = THIS_MODULE,
+};
+
+static struct platform_device *bvme6000_scsi_device;
+
+static __devinit int
+bvme6000_probe(struct device *dev)
+{
+       struct Scsi_Host * host = NULL;
+       struct NCR_700_Host_Parameters *hostdata;
+
+       if (!MACH_IS_BVME6000)
+               goto out;
+
+       hostdata = kmalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
+       if (hostdata == NULL) {
+               printk(KERN_ERR "bvme6000-scsi: "
+                               "Failed to allocate host data\n");
+               goto out;
+       }
+       memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));
+
+       /* Fill in the required pieces of hostdata */
+       hostdata->base = (void __iomem *)BVME_NCR53C710_BASE;
+       hostdata->clock = 40;   /* XXX - depends on the CPU clock! */
+       hostdata->chip710 = 1;
+       hostdata->dmode_extra = DMODE_FC2;
+       hostdata->dcntl_extra = EA_710;
+       hostdata->ctest7_extra = CTEST7_TT1;
+
+       /* and register the chip */
+       host = NCR_700_detect(&bvme6000_scsi_driver_template, hostdata, dev);
+       if (!host) {
+               printk(KERN_ERR "bvme6000-scsi: No host detected; "
+                               "board configuration problem?\n");
+               goto out_free;
+       }
+       host->base = BVME_NCR53C710_BASE;
+       host->this_id = 7;
+       host->irq = BVME_IRQ_SCSI;
+       if (request_irq(BVME_IRQ_SCSI, NCR_700_intr, 0, "bvme6000-scsi",
+                       host)) {
+               printk(KERN_ERR "bvme6000-scsi: request_irq failed\n");
+               goto out_put_host;
+       }
+
+       scsi_scan_host(host);
+
+       return 0;
+
+ out_put_host:
+       scsi_host_put(host);
+ out_free:
+       kfree(hostdata);
+ out:
+       return -ENODEV;
+}
+
+static __devexit int
+bvme6000_device_remove(struct device *dev)
+{
+       struct Scsi_Host *host = dev_to_shost(dev);
+       struct NCR_700_Host_Parameters *hostdata = shost_priv(host);
+
+       scsi_remove_host(host);
+       NCR_700_release(host);
+       kfree(hostdata);
+       free_irq(host->irq, host);
+
+       return 0;
+}
+
+static struct device_driver bvme6000_scsi_driver = {
+       .name   = "bvme6000-scsi",
+       .bus    = &platform_bus_type,
+       .probe  = bvme6000_probe,
+       .remove = __devexit_p(bvme6000_device_remove),
+};
+
+static int __init bvme6000_scsi_init(void)
+{
+       int err;
+
+       err = driver_register(&bvme6000_scsi_driver);
+       if (err) {
+               return err;
+
+       bvme6000_scsi_device = platform_device_register_simple("bvme6000-scsi",
+                                                              -1, NULL, 0);
+       if (IS_ERR(bvme6000_scsi_device)) {
+               driver_unregister(&bvme6000_scsi_driver);
+               return PTR_ERR(bvme6000_scsi_device);
+       }
+
+       return 0;
+}
+
+static void __exit bvme6000_scsi_exit(void)
+{
+       platform_device_unregister(bvme6000_scsi_device);
+       driver_unregister(&bvme6000_scsi_driver);
+}
+
+module_init(bvme6000_scsi_init);
+module_exit(bvme6000_scsi_exit);