#define LE16(x) __constant_cpu_to_le16(x)
#define LE32(x) __constant_cpu_to_le32(x)
+/* Local defines to distinguish between extension and control CTL's */
+#define EXT_ADDITIVE (0x8000)
+#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE)
+#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE)
+#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE)
+#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */
+#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */
+#define PWRINCR_3_TO_1_CHAIN 9 /* 10*log(3)*2 */
+#define PWRINCR_3_TO_2_CHAIN 3 /* floor(10*log(3/2)*2) */
+#define PWRINCR_2_TO_1_CHAIN 6 /* 10*log(2)*2 */
+
+#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */
+#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */
+
static const struct ar9300_eeprom ar9300_default = {
.eepromVersion = 2,
.templateVersion = 2,
}
};
+static u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz)
+{
+ if (fbin == AR9300_BCHAN_UNUSED)
+ return fbin;
+
+ return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
+}
+
static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah)
{
return 0;
#undef POW_SM
}
-static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq)
+static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq,
+ u8 *targetPowerValT2)
{
- u8 targetPowerValT2[ar9300RateSize];
/* XXX: hard code for now, need to get from eeprom struct */
u8 ht40PowerIncForPdadc = 0;
bool is2GHz = false;
"TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]);
i++;
}
-
- /* Write target power array to registers */
- ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
}
static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
return 0;
}
+static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep,
+ int idx,
+ int edge,
+ bool is2GHz)
+{
+ struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G;
+ struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
+
+ if (is2GHz)
+ return ctl_2g[idx].ctlEdges[edge].tPower;
+ else
+ return ctl_5g[idx].ctlEdges[edge].tPower;
+}
+
+static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
+ int idx,
+ unsigned int edge,
+ u16 freq,
+ bool is2GHz)
+{
+ struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G;
+ struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
+
+ u8 *ctl_freqbin = is2GHz ?
+ &eep->ctl_freqbin_2G[idx][0] :
+ &eep->ctl_freqbin_5G[idx][0];
+
+ if (is2GHz) {
+ if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
+ ctl_2g[idx].ctlEdges[edge - 1].flag)
+ return ctl_2g[idx].ctlEdges[edge - 1].tPower;
+ } else {
+ if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
+ ctl_5g[idx].ctlEdges[edge - 1].flag)
+ return ctl_5g[idx].ctlEdges[edge - 1].tPower;
+ }
+
+ return AR9300_MAX_RATE_POWER;
+}
+
+/*
+ * Find the maximum conformance test limit for the given channel and CTL info
+ */
+static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep,
+ u16 freq, int idx, bool is2GHz)
+{
+ u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER;
+ u8 *ctl_freqbin = is2GHz ?
+ &eep->ctl_freqbin_2G[idx][0] :
+ &eep->ctl_freqbin_5G[idx][0];
+ u16 num_edges = is2GHz ?
+ AR9300_NUM_BAND_EDGES_2G : AR9300_NUM_BAND_EDGES_5G;
+ unsigned int edge;
+
+ /* Get the edge power */
+ for (edge = 0;
+ (edge < num_edges) && (ctl_freqbin[edge] != AR9300_BCHAN_UNUSED);
+ edge++) {
+ /*
+ * If there's an exact channel match or an inband flag set
+ * on the lower channel use the given rdEdgePower
+ */
+ if (freq == ath9k_hw_fbin2freq(ctl_freqbin[edge], is2GHz)) {
+ twiceMaxEdgePower =
+ ar9003_hw_get_direct_edge_power(eep, idx,
+ edge, is2GHz);
+ break;
+ } else if ((edge > 0) &&
+ (freq < ath9k_hw_fbin2freq(ctl_freqbin[edge],
+ is2GHz))) {
+ twiceMaxEdgePower =
+ ar9003_hw_get_indirect_edge_power(eep, idx,
+ edge, freq,
+ is2GHz);
+ /*
+ * Leave loop - no more affecting edges possible in
+ * this monotonic increasing list
+ */
+ break;
+ }
+ }
+ return twiceMaxEdgePower;
+}
+
+static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
+ struct ath9k_channel *chan,
+ u8 *pPwrArray, u16 cfgCtl,
+ u8 twiceAntennaReduction,
+ u8 twiceMaxRegulatoryPower,
+ u16 powerLimit)
+{
+ struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep;
+ u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER;
+ static const u16 tpScaleReductionTable[5] = {
+ 0, 3, 6, 9, AR9300_MAX_RATE_POWER
+ };
+ int i;
+ int16_t twiceLargestAntenna;
+ u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
+ u16 ctlModesFor11a[] = {
+ CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40
+ };
+ u16 ctlModesFor11g[] = {
+ CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT,
+ CTL_11G_EXT, CTL_2GHT40
+ };
+ u16 numCtlModes, *pCtlMode, ctlMode, freq;
+ struct chan_centers centers;
+ u8 *ctlIndex;
+ u8 ctlNum;
+ u16 twiceMinEdgePower;
+ bool is2ghz = IS_CHAN_2GHZ(chan);
+
+ ath9k_hw_get_channel_centers(ah, chan, ¢ers);
+
+ /* Compute TxPower reduction due to Antenna Gain */
+ if (is2ghz)
+ twiceLargestAntenna = pEepData->modalHeader2G.antennaGain;
+ else
+ twiceLargestAntenna = pEepData->modalHeader5G.antennaGain;
+
+ twiceLargestAntenna = (int16_t)min((twiceAntennaReduction) -
+ twiceLargestAntenna, 0);
+
+ /*
+ * scaledPower is the minimum of the user input power level
+ * and the regulatory allowed power level
+ */
+ maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
+
+ if (regulatory->tp_scale != ATH9K_TP_SCALE_MAX) {
+ maxRegAllowedPower -=
+ (tpScaleReductionTable[(regulatory->tp_scale)] * 2);
+ }
+
+ scaledPower = min(powerLimit, maxRegAllowedPower);
+
+ /*
+ * Reduce scaled Power by number of chains active to get
+ * to per chain tx power level
+ */
+ switch (ar5416_get_ntxchains(ah->txchainmask)) {
+ case 1:
+ break;
+ case 2:
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ break;
+ case 3:
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ break;
+ }
+
+ scaledPower = max((u16)0, scaledPower);
+
+ /*
+ * Get target powers from EEPROM - our baseline for TX Power
+ */
+ if (is2ghz) {
+ /* Setup for CTL modes */
+ /* CTL_11B, CTL_11G, CTL_2GHT20 */
+ numCtlModes =
+ ARRAY_SIZE(ctlModesFor11g) -
+ SUB_NUM_CTL_MODES_AT_2G_40;
+ pCtlMode = ctlModesFor11g;
+ if (IS_CHAN_HT40(chan))
+ /* All 2G CTL's */
+ numCtlModes = ARRAY_SIZE(ctlModesFor11g);
+ } else {
+ /* Setup for CTL modes */
+ /* CTL_11A, CTL_5GHT20 */
+ numCtlModes = ARRAY_SIZE(ctlModesFor11a) -
+ SUB_NUM_CTL_MODES_AT_5G_40;
+ pCtlMode = ctlModesFor11a;
+ if (IS_CHAN_HT40(chan))
+ /* All 5G CTL's */
+ numCtlModes = ARRAY_SIZE(ctlModesFor11a);
+ }
+
+ /*
+ * For MIMO, need to apply regulatory caps individually across
+ * dynamically running modes: CCK, OFDM, HT20, HT40
+ *
+ * The outer loop walks through each possible applicable runtime mode.
+ * The inner loop walks through each ctlIndex entry in EEPROM.
+ * The ctl value is encoded as [7:4] == test group, [3:0] == test mode.
+ */
+ for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
+ bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
+ (pCtlMode[ctlMode] == CTL_2GHT40);
+ if (isHt40CtlMode)
+ freq = centers.synth_center;
+ else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
+ freq = centers.ext_center;
+ else
+ freq = centers.ctl_center;
+
+ ath_print(common, ATH_DBG_REGULATORY,
+ "LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
+ "EXT_ADDITIVE %d\n",
+ ctlMode, numCtlModes, isHt40CtlMode,
+ (pCtlMode[ctlMode] & EXT_ADDITIVE));
+
+ /* walk through each CTL index stored in EEPROM */
+ if (is2ghz) {
+ ctlIndex = pEepData->ctlIndex_2G;
+ ctlNum = AR9300_NUM_CTLS_2G;
+ } else {
+ ctlIndex = pEepData->ctlIndex_5G;
+ ctlNum = AR9300_NUM_CTLS_5G;
+ }
+
+ for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) {
+ ath_print(common, ATH_DBG_REGULATORY,
+ "LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
+ "pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
+ "chan %dn",
+ i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i],
+ chan->channel);
+
+ /*
+ * compare test group from regulatory
+ * channel list with test mode from pCtlMode
+ * list
+ */
+ if ((((cfgCtl & ~CTL_MODE_M) |
+ (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+ ctlIndex[i]) ||
+ (((cfgCtl & ~CTL_MODE_M) |
+ (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+ ((ctlIndex[i] & CTL_MODE_M) |
+ SD_NO_CTL))) {
+ twiceMinEdgePower =
+ ar9003_hw_get_max_edge_power(pEepData,
+ freq, i,
+ is2ghz);
+
+ if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL)
+ /*
+ * Find the minimum of all CTL
+ * edge powers that apply to
+ * this channel
+ */
+ twiceMaxEdgePower =
+ min(twiceMaxEdgePower,
+ twiceMinEdgePower);
+ else {
+ /* specific */
+ twiceMaxEdgePower =
+ twiceMinEdgePower;
+ break;
+ }
+ }
+ }
+
+ minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
+
+ ath_print(common, ATH_DBG_REGULATORY,
+ "SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d "
+ "sP %d minCtlPwr %d\n",
+ ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
+ scaledPower, minCtlPower);
+
+ /* Apply ctl mode to correct target power set */
+ switch (pCtlMode[ctlMode]) {
+ case CTL_11B:
+ for (i = ALL_TARGET_LEGACY_1L_5L;
+ i <= ALL_TARGET_LEGACY_11S; i++)
+ pPwrArray[i] =
+ (u8)min((u16)pPwrArray[i],
+ minCtlPower);
+ break;
+ case CTL_11A:
+ case CTL_11G:
+ for (i = ALL_TARGET_LEGACY_6_24;
+ i <= ALL_TARGET_LEGACY_54; i++)
+ pPwrArray[i] =
+ (u8)min((u16)pPwrArray[i],
+ minCtlPower);
+ break;
+ case CTL_5GHT20:
+ case CTL_2GHT20:
+ for (i = ALL_TARGET_HT20_0_8_16;
+ i <= ALL_TARGET_HT20_21; i++)
+ pPwrArray[i] =
+ (u8)min((u16)pPwrArray[i],
+ minCtlPower);
+ pPwrArray[ALL_TARGET_HT20_22] =
+ (u8)min((u16)pPwrArray[ALL_TARGET_HT20_22],
+ minCtlPower);
+ pPwrArray[ALL_TARGET_HT20_23] =
+ (u8)min((u16)pPwrArray[ALL_TARGET_HT20_23],
+ minCtlPower);
+ break;
+ case CTL_5GHT40:
+ case CTL_2GHT40:
+ for (i = ALL_TARGET_HT40_0_8_16;
+ i <= ALL_TARGET_HT40_23; i++)
+ pPwrArray[i] =
+ (u8)min((u16)pPwrArray[i],
+ minCtlPower);
+ break;
+ default:
+ break;
+ }
+ } /* end ctl mode checking */
+}
+
static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah,
struct ath9k_channel *chan, u16 cfgCtl,
u8 twiceAntennaReduction,
u8 twiceMaxRegulatoryPower,
u8 powerLimit)
{
- ah->txpower_limit = powerLimit;
- ar9003_hw_set_target_power_eeprom(ah, chan->channel);
+ struct ath_common *common = ath9k_hw_common(ah);
+ u8 targetPowerValT2[ar9300RateSize];
+ unsigned int i = 0;
+
+ ar9003_hw_set_target_power_eeprom(ah, chan->channel, targetPowerValT2);
+ ar9003_hw_set_power_per_rate_table(ah, chan,
+ targetPowerValT2, cfgCtl,
+ twiceAntennaReduction,
+ twiceMaxRegulatoryPower,
+ powerLimit);
+
+ while (i < ar9300RateSize) {
+ ath_print(common, ATH_DBG_EEPROM,
+ "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+ i++;
+ ath_print(common, ATH_DBG_EEPROM,
+ "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+ i++;
+ ath_print(common, ATH_DBG_EEPROM,
+ "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+ i++;
+ ath_print(common, ATH_DBG_EEPROM,
+ "TPC[%02d] 0x%08x\n\n", i, targetPowerValT2[i]);
+ i++;
+ }
+
+ /* Write target power array to registers */
+ ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
+
+ /*
+ * This is the TX power we send back to driver core,
+ * and it can use to pass to userspace to display our
+ * currently configured TX power setting.
+ *
+ * Since power is rate dependent, use one of the indices
+ * from the AR9300_Rates enum to select an entry from
+ * targetPowerValT2[] to report. Currently returns the
+ * power for HT40 MCS 0, HT20 MCS 0, or OFDM 6 Mbps
+ * as CCK power is less interesting (?).
+ */
+ i = ALL_TARGET_LEGACY_6_24; /* legacy */
+ if (IS_CHAN_HT40(chan))
+ i = ALL_TARGET_HT40_0_8_16; /* ht40 */
+ else if (IS_CHAN_HT20(chan))
+ i = ALL_TARGET_HT20_0_8_16; /* ht20 */
+
+ ah->txpower_limit = targetPowerValT2[i];
+
ar9003_hw_calibration_apply(ah, chan->channel);
}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff