--- /dev/null
+/*
+ * Low-Level PCI Access for i386 machines.
+ *
+ * (c) 1999 Martin Mares <mj@ucw.cz>
+ */
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 0x0001
+#define PCI_PROBE_CONF1 0x0002
+#define PCI_PROBE_CONF2 0x0004
+#define PCI_PROBE_MMCONF 0x0008
+#define PCI_PROBE_MASK 0x000f
+#define PCI_PROBE_NOEARLY 0x0010
+
+#define PCI_NO_CHECKS 0x0400
+#define PCI_USE_PIRQ_MASK 0x0800
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+#define PCI_ASSIGN_ALL_BUSSES 0x4000
+#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
+#define PCI_USE__CRS 0x10000
+#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
+#define PCI_HAS_IO_ECS 0x40000
+#define PCI_NOASSIGN_ROMS 0x80000
+
+extern unsigned int pci_probe;
+extern unsigned long pirq_table_addr;
+
+enum pci_bf_sort_state {
+ pci_bf_sort_default,
+ pci_force_nobf,
+ pci_force_bf,
+ pci_dmi_bf,
+};
+
+/* pci-i386.c */
+
+extern unsigned int pcibios_max_latency;
+
+void pcibios_resource_survey(void);
+
+/* pci-pc.c */
+
+extern int pcibios_last_bus;
+extern struct pci_bus *pci_root_bus;
+extern struct pci_ops pci_root_ops;
+
+/* pci-irq.c */
+
+struct irq_info {
+ u8 bus, devfn; /* Bus, device and function */
+ struct {
+ u8 link; /* IRQ line ID, chipset dependent,
+ 0 = not routed */
+ u16 bitmap; /* Available IRQs */
+ } __attribute__((packed)) irq[4];
+ u8 slot; /* Slot number, 0=onboard */
+ u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+ u32 signature; /* PIRQ_SIGNATURE should be here */
+ u16 version; /* PIRQ_VERSION */
+ u16 size; /* Table size in bytes */
+ u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to
+ PCI usage */
+ u16 rtr_vendor, rtr_device; /* Vendor and device ID of
+ interrupt router */
+ u32 miniport_data; /* Crap */
+ u8 rfu[11];
+ u8 checksum; /* Modulo 256 checksum must give 0 */
+ struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern int pcibios_scanned;
+extern spinlock_t pci_config_lock;
+
+extern int (*pcibios_enable_irq)(struct pci_dev *dev);
+extern void (*pcibios_disable_irq)(struct pci_dev *dev);
+
+struct pci_raw_ops {
+ int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
+ int reg, int len, u32 *val);
+ int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
+ int reg, int len, u32 val);
+};
+
+extern struct pci_raw_ops *raw_pci_ops;
+extern struct pci_raw_ops *raw_pci_ext_ops;
+
+extern struct pci_raw_ops pci_direct_conf1;
+extern bool port_cf9_safe;
+
+/* arch_initcall level */
+extern int pci_direct_probe(void);
+extern void pci_direct_init(int type);
+extern void pci_pcbios_init(void);
+extern int pci_olpc_init(void);
+extern void __init dmi_check_pciprobe(void);
+extern void __init dmi_check_skip_isa_align(void);
+
+/* some common used subsys_initcalls */
+extern int __init pci_acpi_init(void);
+extern int __init pcibios_irq_init(void);
+extern int __init pci_visws_init(void);
+extern int __init pci_numaq_init(void);
+extern int __init pcibios_init(void);
+
+/* pci-mmconfig.c */
+
+extern int __init pci_mmcfg_arch_init(void);
+extern void __init pci_mmcfg_arch_free(void);
+
+/*
+ * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
+ * on their northbrige except through the * %eax register. As such, you MUST
+ * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
+ * accessor functions.
+ * In fact just use pci_config_*, nothing else please.
+ */
+static inline unsigned char mmio_config_readb(void __iomem *pos)
+{
+ u8 val;
+ asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
+ return val;
+}
+
+static inline unsigned short mmio_config_readw(void __iomem *pos)
+{
+ u16 val;
+ asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
+ return val;
+}
+
+static inline unsigned int mmio_config_readl(void __iomem *pos)
+{
+ u32 val;
+ asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
+ return val;
+}
+
+static inline void mmio_config_writeb(void __iomem *pos, u8 val)
+{
+ asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+static inline void mmio_config_writew(void __iomem *pos, u16 val)
+{
+ asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+static inline void mmio_config_writel(void __iomem *pos, u32 val)
+{
+ asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
#include <asm/msr.h>
#include <asm/acpi.h>
#include <asm/mmconfig.h>
-
-#include "../pci/pci.h"
+#include <asm/pci_x86.h>
struct pci_hostbridge_probe {
u32 bus;
#include <asm/proto.h>
#include <asm/reboot_fixups.h>
#include <asm/reboot.h>
+#include <asm/pci_x86.h>
#ifdef CONFIG_X86_32
# include <linux/dmi.h>
#endif
#include <mach_ipi.h>
-#include "../pci/pci.h"
-
/*
* Power off function, if any
#include <linux/irq.h>
#include <linux/dmi.h>
#include <asm/numa.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
struct pci_root_info {
char *name;
#include <linux/pci.h>
#include <linux/topology.h>
#include <linux/cpu.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
#ifdef CONFIG_X86_64
#include <asm/pci-direct.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/smp.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/dmi.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* Functions for accessing PCI base (first 256 bytes) and extended
#include <linux/pci.h>
#include <asm/pci-direct.h>
#include <asm/io.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Direct PCI access. This is used for PCI accesses in early boot before
the PCI subsystem works. */
#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include "pci.h"
-
+#include <asm/pci_x86.h>
static void __devinit pci_fixup_i450nx(struct pci_dev *d)
{
#include <asm/pat.h>
#include <asm/e820.h>
+#include <asm/pci_x86.h>
-#include "pci.h"
static int
skip_isa_ioresource_align(struct pci_dev *dev) {
#include <linux/pci.h>
#include <linux/init.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* arch_initcall has too random ordering, so call the initializers
in the right sequence from here. */
#include <asm/io_apic.h>
#include <linux/irq.h>
#include <linux/acpi.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
#define PIRQ_VERSION 0x0100
*/
#include <linux/init.h>
#include <linux/pci.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* Discover remaining PCI buses in case there are peer host bridges.
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <asm/e820.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
/* aperture is up to 256MB but BIOS may reserve less */
#define MMCONFIG_APER_MIN (2 * 1024*1024)
#include <linux/init.h>
#include <linux/acpi.h>
#include <asm/e820.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Assume systems with more busses have correct MCFG */
#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <asm/e820.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
#include <linux/nodemask.h>
#include <mach_apic.h>
#include <asm/mpspec.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
#include <linux/init.h>
#include <asm/olpc.h>
#include <asm/geode.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* In the tables below, the first two line (8 longwords) are the
#include <linux/init.h>
#include <linux/module.h>
#include <linux/uaccess.h>
-#include "pci.h"
-#include "pci-functions.h"
-
+#include <asm/pci_x86.h>
+#include <asm/mach-default/pci-functions.h>
/* BIOS32 signature: "_32_" */
#define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
+++ /dev/null
-/*
- * Low-Level PCI Access for i386 machines.
- *
- * (c) 1999 Martin Mares <mj@ucw.cz>
- */
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-#define PCI_PROBE_BIOS 0x0001
-#define PCI_PROBE_CONF1 0x0002
-#define PCI_PROBE_CONF2 0x0004
-#define PCI_PROBE_MMCONF 0x0008
-#define PCI_PROBE_MASK 0x000f
-#define PCI_PROBE_NOEARLY 0x0010
-
-#define PCI_NO_CHECKS 0x0400
-#define PCI_USE_PIRQ_MASK 0x0800
-#define PCI_ASSIGN_ROMS 0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-#define PCI_ASSIGN_ALL_BUSSES 0x4000
-#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
-#define PCI_USE__CRS 0x10000
-#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
-#define PCI_HAS_IO_ECS 0x40000
-#define PCI_NOASSIGN_ROMS 0x80000
-
-extern unsigned int pci_probe;
-extern unsigned long pirq_table_addr;
-
-enum pci_bf_sort_state {
- pci_bf_sort_default,
- pci_force_nobf,
- pci_force_bf,
- pci_dmi_bf,
-};
-
-/* pci-i386.c */
-
-extern unsigned int pcibios_max_latency;
-
-void pcibios_resource_survey(void);
-
-/* pci-pc.c */
-
-extern int pcibios_last_bus;
-extern struct pci_bus *pci_root_bus;
-extern struct pci_ops pci_root_ops;
-
-/* pci-irq.c */
-
-struct irq_info {
- u8 bus, devfn; /* Bus, device and function */
- struct {
- u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
- u16 bitmap; /* Available IRQs */
- } __attribute__((packed)) irq[4];
- u8 slot; /* Slot number, 0=onboard */
- u8 rfu;
-} __attribute__((packed));
-
-struct irq_routing_table {
- u32 signature; /* PIRQ_SIGNATURE should be here */
- u16 version; /* PIRQ_VERSION */
- u16 size; /* Table size in bytes */
- u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
- u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
- u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
- u32 miniport_data; /* Crap */
- u8 rfu[11];
- u8 checksum; /* Modulo 256 checksum must give zero */
- struct irq_info slots[0];
-} __attribute__((packed));
-
-extern unsigned int pcibios_irq_mask;
-
-extern int pcibios_scanned;
-extern spinlock_t pci_config_lock;
-
-extern int (*pcibios_enable_irq)(struct pci_dev *dev);
-extern void (*pcibios_disable_irq)(struct pci_dev *dev);
-
-struct pci_raw_ops {
- int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
- int reg, int len, u32 *val);
- int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
- int reg, int len, u32 val);
-};
-
-extern struct pci_raw_ops *raw_pci_ops;
-extern struct pci_raw_ops *raw_pci_ext_ops;
-
-extern struct pci_raw_ops pci_direct_conf1;
-extern bool port_cf9_safe;
-
-/* arch_initcall level */
-extern int pci_direct_probe(void);
-extern void pci_direct_init(int type);
-extern void pci_pcbios_init(void);
-extern int pci_olpc_init(void);
-extern void __init dmi_check_pciprobe(void);
-extern void __init dmi_check_skip_isa_align(void);
-
-/* some common used subsys_initcalls */
-extern int __init pci_acpi_init(void);
-extern int __init pcibios_irq_init(void);
-extern int __init pci_visws_init(void);
-extern int __init pci_numaq_init(void);
-extern int __init pcibios_init(void);
-
-/* pci-mmconfig.c */
-
-extern int __init pci_mmcfg_arch_init(void);
-extern void __init pci_mmcfg_arch_free(void);
-
-/*
- * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
- * on their northbrige except through the * %eax register. As such, you MUST
- * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
- * accessor functions.
- * In fact just use pci_config_*, nothing else please.
- */
-static inline unsigned char mmio_config_readb(void __iomem *pos)
-{
- u8 val;
- asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
- return val;
-}
-
-static inline unsigned short mmio_config_readw(void __iomem *pos)
-{
- u16 val;
- asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
- return val;
-}
-
-static inline unsigned int mmio_config_readl(void __iomem *pos)
-{
- u32 val;
- asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
- return val;
-}
-
-static inline void mmio_config_writeb(void __iomem *pos, u8 val)
-{
- asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
-}
-
-static inline void mmio_config_writew(void __iomem *pos, u16 val)
-{
- asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
-}
-
-static inline void mmio_config_writel(void __iomem *pos, u32 val)
-{
- asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
-}
#include <linux/init.h>
#include <asm/setup.h>
+#include <asm/pci_x86.h>
#include <asm/visws/cobalt.h>
#include <asm/visws/lithium.h>
-#include "pci.h"
-
static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
static void pci_visws_disable_irq(struct pci_dev *dev) { }
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include "../../../arch/x86/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+#include <asm/pci_x86.h>
/* Global variables */
#include "../pci.h"
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include "../../../arch/x86/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+#include <asm/pci_x86.h>
u8 cpqhp_nic_irq;
#include <linux/delay.h>
#include <linux/wait.h>
#include "../pci.h"
-#include "../../../arch/x86/pci/pci.h" /* for struct irq_routing_table */
+#include <asm/pci_x86.h> /* for struct irq_routing_table */
#include "ibmphp.h"
#define attn_on(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON)
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff