--- /dev/null
+/*
+ * Realtek RTL2832 DVB-T demodulator driver
+ *
+ * Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "rtl2832_priv.h"
+
+
+int rtl2832_debug;
+module_param_named(debug, rtl2832_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+
+static const int reg_mask[32] = {
+ 0x00000001,
+ 0x00000003,
+ 0x00000007,
+ 0x0000000f,
+ 0x0000001f,
+ 0x0000003f,
+ 0x0000007f,
+ 0x000000ff,
+ 0x000001ff,
+ 0x000003ff,
+ 0x000007ff,
+ 0x00000fff,
+ 0x00001fff,
+ 0x00003fff,
+ 0x00007fff,
+ 0x0000ffff,
+ 0x0001ffff,
+ 0x0003ffff,
+ 0x0007ffff,
+ 0x000fffff,
+ 0x001fffff,
+ 0x003fffff,
+ 0x007fffff,
+ 0x00ffffff,
+ 0x01ffffff,
+ 0x03ffffff,
+ 0x07ffffff,
+ 0x0fffffff,
+ 0x1fffffff,
+ 0x3fffffff,
+ 0x7fffffff,
+ 0xffffffff
+};
+
+static const struct rtl2832_reg_entry registers[] = {
+ [DVBT_SOFT_RST] = {0x1, 0x1, 2, 2},
+ [DVBT_IIC_REPEAT] = {0x1, 0x1, 3, 3},
+ [DVBT_TR_WAIT_MIN_8K] = {0x1, 0x88, 11, 2},
+ [DVBT_RSD_BER_FAIL_VAL] = {0x1, 0x8f, 15, 0},
+ [DVBT_EN_BK_TRK] = {0x1, 0xa6, 7, 7},
+ [DVBT_AD_EN_REG] = {0x0, 0x8, 7, 7},
+ [DVBT_AD_EN_REG1] = {0x0, 0x8, 6, 6},
+ [DVBT_EN_BBIN] = {0x1, 0xb1, 0, 0},
+ [DVBT_MGD_THD0] = {0x1, 0x95, 7, 0},
+ [DVBT_MGD_THD1] = {0x1, 0x96, 7, 0},
+ [DVBT_MGD_THD2] = {0x1, 0x97, 7, 0},
+ [DVBT_MGD_THD3] = {0x1, 0x98, 7, 0},
+ [DVBT_MGD_THD4] = {0x1, 0x99, 7, 0},
+ [DVBT_MGD_THD5] = {0x1, 0x9a, 7, 0},
+ [DVBT_MGD_THD6] = {0x1, 0x9b, 7, 0},
+ [DVBT_MGD_THD7] = {0x1, 0x9c, 7, 0},
+ [DVBT_EN_CACQ_NOTCH] = {0x1, 0x61, 4, 4},
+ [DVBT_AD_AV_REF] = {0x0, 0x9, 6, 0},
+ [DVBT_REG_PI] = {0x0, 0xa, 2, 0},
+ [DVBT_PIP_ON] = {0x0, 0x21, 3, 3},
+ [DVBT_SCALE1_B92] = {0x2, 0x92, 7, 0},
+ [DVBT_SCALE1_B93] = {0x2, 0x93, 7, 0},
+ [DVBT_SCALE1_BA7] = {0x2, 0xa7, 7, 0},
+ [DVBT_SCALE1_BA9] = {0x2, 0xa9, 7, 0},
+ [DVBT_SCALE1_BAA] = {0x2, 0xaa, 7, 0},
+ [DVBT_SCALE1_BAB] = {0x2, 0xab, 7, 0},
+ [DVBT_SCALE1_BAC] = {0x2, 0xac, 7, 0},
+ [DVBT_SCALE1_BB0] = {0x2, 0xb0, 7, 0},
+ [DVBT_SCALE1_BB1] = {0x2, 0xb1, 7, 0},
+ [DVBT_KB_P1] = {0x1, 0x64, 3, 1},
+ [DVBT_KB_P2] = {0x1, 0x64, 6, 4},
+ [DVBT_KB_P3] = {0x1, 0x65, 2, 0},
+ [DVBT_OPT_ADC_IQ] = {0x0, 0x6, 5, 4},
+ [DVBT_AD_AVI] = {0x0, 0x9, 1, 0},
+ [DVBT_AD_AVQ] = {0x0, 0x9, 3, 2},
+ [DVBT_K1_CR_STEP12] = {0x2, 0xad, 9, 4},
+ [DVBT_TRK_KS_P2] = {0x1, 0x6f, 2, 0},
+ [DVBT_TRK_KS_I2] = {0x1, 0x70, 5, 3},
+ [DVBT_TR_THD_SET2] = {0x1, 0x72, 3, 0},
+ [DVBT_TRK_KC_P2] = {0x1, 0x73, 5, 3},
+ [DVBT_TRK_KC_I2] = {0x1, 0x75, 2, 0},
+ [DVBT_CR_THD_SET2] = {0x1, 0x76, 7, 6},
+ [DVBT_PSET_IFFREQ] = {0x1, 0x19, 21, 0},
+ [DVBT_SPEC_INV] = {0x1, 0x15, 0, 0},
+ [DVBT_RSAMP_RATIO] = {0x1, 0x9f, 27, 2},
+ [DVBT_CFREQ_OFF_RATIO] = {0x1, 0x9d, 23, 4},
+ [DVBT_FSM_STAGE] = {0x3, 0x51, 6, 3},
+ [DVBT_RX_CONSTEL] = {0x3, 0x3c, 3, 2},
+ [DVBT_RX_HIER] = {0x3, 0x3c, 6, 4},
+ [DVBT_RX_C_RATE_LP] = {0x3, 0x3d, 2, 0},
+ [DVBT_RX_C_RATE_HP] = {0x3, 0x3d, 5, 3},
+ [DVBT_GI_IDX] = {0x3, 0x51, 1, 0},
+ [DVBT_FFT_MODE_IDX] = {0x3, 0x51, 2, 2},
+ [DVBT_RSD_BER_EST] = {0x3, 0x4e, 15, 0},
+ [DVBT_CE_EST_EVM] = {0x4, 0xc, 15, 0},
+ [DVBT_RF_AGC_VAL] = {0x3, 0x5b, 13, 0},
+ [DVBT_IF_AGC_VAL] = {0x3, 0x59, 13, 0},
+ [DVBT_DAGC_VAL] = {0x3, 0x5, 7, 0},
+ [DVBT_SFREQ_OFF] = {0x3, 0x18, 13, 0},
+ [DVBT_CFREQ_OFF] = {0x3, 0x5f, 17, 0},
+ [DVBT_POLAR_RF_AGC] = {0x0, 0xe, 1, 1},
+ [DVBT_POLAR_IF_AGC] = {0x0, 0xe, 0, 0},
+ [DVBT_AAGC_HOLD] = {0x1, 0x4, 5, 5},
+ [DVBT_EN_RF_AGC] = {0x1, 0x4, 6, 6},
+ [DVBT_EN_IF_AGC] = {0x1, 0x4, 7, 7},
+ [DVBT_IF_AGC_MIN] = {0x1, 0x8, 7, 0},
+ [DVBT_IF_AGC_MAX] = {0x1, 0x9, 7, 0},
+ [DVBT_RF_AGC_MIN] = {0x1, 0xa, 7, 0},
+ [DVBT_RF_AGC_MAX] = {0x1, 0xb, 7, 0},
+ [DVBT_IF_AGC_MAN] = {0x1, 0xc, 6, 6},
+ [DVBT_IF_AGC_MAN_VAL] = {0x1, 0xc, 13, 0},
+ [DVBT_RF_AGC_MAN] = {0x1, 0xe, 6, 6},
+ [DVBT_RF_AGC_MAN_VAL] = {0x1, 0xe, 13, 0},
+ [DVBT_DAGC_TRG_VAL] = {0x1, 0x12, 7, 0},
+ [DVBT_AGC_TARG_VAL_0] = {0x1, 0x2, 0, 0},
+ [DVBT_AGC_TARG_VAL_8_1] = {0x1, 0x3, 7, 0},
+ [DVBT_AAGC_LOOP_GAIN] = {0x1, 0xc7, 5, 1},
+ [DVBT_LOOP_GAIN2_3_0] = {0x1, 0x4, 4, 1},
+ [DVBT_LOOP_GAIN2_4] = {0x1, 0x5, 7, 7},
+ [DVBT_LOOP_GAIN3] = {0x1, 0xc8, 4, 0},
+ [DVBT_VTOP1] = {0x1, 0x6, 5, 0},
+ [DVBT_VTOP2] = {0x1, 0xc9, 5, 0},
+ [DVBT_VTOP3] = {0x1, 0xca, 5, 0},
+ [DVBT_KRF1] = {0x1, 0xcb, 7, 0},
+ [DVBT_KRF2] = {0x1, 0x7, 7, 0},
+ [DVBT_KRF3] = {0x1, 0xcd, 7, 0},
+ [DVBT_KRF4] = {0x1, 0xce, 7, 0},
+ [DVBT_EN_GI_PGA] = {0x1, 0xe5, 0, 0},
+ [DVBT_THD_LOCK_UP] = {0x1, 0xd9, 8, 0},
+ [DVBT_THD_LOCK_DW] = {0x1, 0xdb, 8, 0},
+ [DVBT_THD_UP1] = {0x1, 0xdd, 7, 0},
+ [DVBT_THD_DW1] = {0x1, 0xde, 7, 0},
+ [DVBT_INTER_CNT_LEN] = {0x1, 0xd8, 3, 0},
+ [DVBT_GI_PGA_STATE] = {0x1, 0xe6, 3, 3},
+ [DVBT_EN_AGC_PGA] = {0x1, 0xd7, 0, 0},
+ [DVBT_CKOUTPAR] = {0x1, 0x7b, 5, 5},
+ [DVBT_CKOUT_PWR] = {0x1, 0x7b, 6, 6},
+ [DVBT_SYNC_DUR] = {0x1, 0x7b, 7, 7},
+ [DVBT_ERR_DUR] = {0x1, 0x7c, 0, 0},
+ [DVBT_SYNC_LVL] = {0x1, 0x7c, 1, 1},
+ [DVBT_ERR_LVL] = {0x1, 0x7c, 2, 2},
+ [DVBT_VAL_LVL] = {0x1, 0x7c, 3, 3},
+ [DVBT_SERIAL] = {0x1, 0x7c, 4, 4},
+ [DVBT_SER_LSB] = {0x1, 0x7c, 5, 5},
+ [DVBT_CDIV_PH0] = {0x1, 0x7d, 3, 0},
+ [DVBT_CDIV_PH1] = {0x1, 0x7d, 7, 4},
+ [DVBT_MPEG_IO_OPT_2_2] = {0x0, 0x6, 7, 7},
+ [DVBT_MPEG_IO_OPT_1_0] = {0x0, 0x7, 7, 6},
+ [DVBT_CKOUTPAR_PIP] = {0x0, 0xb7, 4, 4},
+ [DVBT_CKOUT_PWR_PIP] = {0x0, 0xb7, 3, 3},
+ [DVBT_SYNC_LVL_PIP] = {0x0, 0xb7, 2, 2},
+ [DVBT_ERR_LVL_PIP] = {0x0, 0xb7, 1, 1},
+ [DVBT_VAL_LVL_PIP] = {0x0, 0xb7, 0, 0},
+ [DVBT_CKOUTPAR_PID] = {0x0, 0xb9, 4, 4},
+ [DVBT_CKOUT_PWR_PID] = {0x0, 0xb9, 3, 3},
+ [DVBT_SYNC_LVL_PID] = {0x0, 0xb9, 2, 2},
+ [DVBT_ERR_LVL_PID] = {0x0, 0xb9, 1, 1},
+ [DVBT_VAL_LVL_PID] = {0x0, 0xb9, 0, 0},
+ [DVBT_SM_PASS] = {0x1, 0x93, 11, 0},
+ [DVBT_AD7_SETTING] = {0x0, 0x11, 15, 0},
+ [DVBT_RSSI_R] = {0x3, 0x1, 6, 0},
+ [DVBT_ACI_DET_IND] = {0x3, 0x12, 0, 0},
+ [DVBT_REG_MON] = {0x0, 0xd, 1, 0},
+ [DVBT_REG_MONSEL] = {0x0, 0xd, 2, 2},
+ [DVBT_REG_GPE] = {0x0, 0xd, 7, 7},
+ [DVBT_REG_GPO] = {0x0, 0x10, 0, 0},
+ [DVBT_REG_4MSEL] = {0x0, 0x13, 0, 0},
+};
+
+/* write multiple hardware registers */
+static int rtl2832_wr(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
+{
+ int ret;
+ u8 buf[1+len];
+ struct i2c_msg msg[1] = {
+ {
+ .addr = priv->cfg.i2c_addr,
+ .flags = 0,
+ .len = 1+len,
+ .buf = buf,
+ }
+ };
+
+ buf[0] = reg;
+ memcpy(&buf[1], val, len);
+
+ ret = i2c_transfer(priv->i2c, msg, 1);
+ if (ret == 1) {
+ ret = 0;
+ } else {
+ warn("i2c wr failed=%d reg=%02x len=%d", ret, reg, len);
+ ret = -EREMOTEIO;
+ }
+ return ret;
+}
+
+/* read multiple hardware registers */
+static int rtl2832_rd(struct rtl2832_priv *priv, u8 reg, u8 *val, int len)
+{
+ int ret;
+ struct i2c_msg msg[2] = {
+ {
+ .addr = priv->cfg.i2c_addr,
+ .flags = 0,
+ .len = 1,
+ .buf = ®,
+ }, {
+ .addr = priv->cfg.i2c_addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = val,
+ }
+ };
+
+ ret = i2c_transfer(priv->i2c, msg, 2);
+ if (ret == 2) {
+ ret = 0;
+ } else {
+ warn("i2c rd failed=%d reg=%02x len=%d", ret, reg, len);
+ ret = -EREMOTEIO;
+}
+return ret;
+}
+
+/* write multiple registers */
+static int rtl2832_wr_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val,
+ int len)
+{
+ int ret;
+
+
+ /* switch bank if needed */
+ if (page != priv->page) {
+ ret = rtl2832_wr(priv, 0x00, &page, 1);
+ if (ret)
+ return ret;
+
+ priv->page = page;
+}
+
+return rtl2832_wr(priv, reg, val, len);
+}
+
+/* read multiple registers */
+static int rtl2832_rd_regs(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val,
+ int len)
+{
+ int ret;
+
+ /* switch bank if needed */
+ if (page != priv->page) {
+ ret = rtl2832_wr(priv, 0x00, &page, 1);
+ if (ret)
+ return ret;
+
+ priv->page = page;
+ }
+
+ return rtl2832_rd(priv, reg, val, len);
+}
+
+#if 0 /* currently not used */
+/* write single register */
+static int rtl2832_wr_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 val)
+{
+ return rtl2832_wr_regs(priv, reg, page, &val, 1);
+}
+#endif
+
+/* read single register */
+static int rtl2832_rd_reg(struct rtl2832_priv *priv, u8 reg, u8 page, u8 *val)
+{
+ return rtl2832_rd_regs(priv, reg, page, val, 1);
+}
+
+int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val)
+{
+ int ret;
+
+ u8 reg_start_addr;
+ u8 msb, lsb;
+ u8 page;
+ u8 reading[4];
+ u32 reading_tmp;
+ int i;
+
+ u8 len;
+ u32 mask;
+
+ reg_start_addr = registers[reg].start_address;
+ msb = registers[reg].msb;
+ lsb = registers[reg].lsb;
+ page = registers[reg].page;
+
+ len = (msb >> 3) + 1;
+ mask = reg_mask[msb - lsb];
+
+ ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
+ if (ret)
+ goto err;
+
+ reading_tmp = 0;
+ for (i = 0; i < len; i++)
+ reading_tmp |= reading[i] << ((len - 1 - i) * 8);
+
+ *val = (reading_tmp >> lsb) & mask;
+
+ return ret;
+
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+
+}
+
+int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val)
+{
+ int ret, i;
+ u8 len;
+ u8 reg_start_addr;
+ u8 msb, lsb;
+ u8 page;
+ u32 mask;
+
+
+ u8 reading[4];
+ u8 writing[4];
+ u32 reading_tmp;
+ u32 writing_tmp;
+
+
+ reg_start_addr = registers[reg].start_address;
+ msb = registers[reg].msb;
+ lsb = registers[reg].lsb;
+ page = registers[reg].page;
+
+ len = (msb >> 3) + 1;
+ mask = reg_mask[msb - lsb];
+
+
+ ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
+ if (ret)
+ goto err;
+
+ reading_tmp = 0;
+ for (i = 0; i < len; i++)
+ reading_tmp |= reading[i] << ((len - 1 - i) * 8);
+
+ writing_tmp = reading_tmp & ~(mask << lsb);
+ writing_tmp |= ((val & mask) << lsb);
+
+
+ for (i = 0; i < len; i++)
+ writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff;
+
+ ret = rtl2832_wr_regs(priv, reg_start_addr, page, &writing[0], len);
+ if (ret)
+ goto err;
+
+ return ret;
+
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+
+}
+
+
+static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ int ret;
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+
+ dbg("%s: enable=%d", __func__, enable);
+
+ /* gate already open or close */
+ if (priv->i2c_gate_state == enable)
+ return 0;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_IIC_REPEAT, (enable ? 0x1 : 0x0));
+ if (ret)
+ goto err;
+
+ priv->i2c_gate_state = enable;
+
+ return ret;
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+
+
+static int rtl2832_init(struct dvb_frontend *fe)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+ int i, ret;
+
+ u8 en_bbin;
+ u64 pset_iffreq;
+
+ /* initialization values for the demodulator registers */
+ struct rtl2832_reg_value rtl2832_initial_regs[] = {
+ {DVBT_AD_EN_REG, 0x1},
+ {DVBT_AD_EN_REG1, 0x1},
+ {DVBT_RSD_BER_FAIL_VAL, 0x2800},
+ {DVBT_MGD_THD0, 0x10},
+ {DVBT_MGD_THD1, 0x20},
+ {DVBT_MGD_THD2, 0x20},
+ {DVBT_MGD_THD3, 0x40},
+ {DVBT_MGD_THD4, 0x22},
+ {DVBT_MGD_THD5, 0x32},
+ {DVBT_MGD_THD6, 0x37},
+ {DVBT_MGD_THD7, 0x39},
+ {DVBT_EN_BK_TRK, 0x0},
+ {DVBT_EN_CACQ_NOTCH, 0x0},
+ {DVBT_AD_AV_REF, 0x2a},
+ {DVBT_REG_PI, 0x6},
+ {DVBT_PIP_ON, 0x0},
+ {DVBT_CDIV_PH0, 0x8},
+ {DVBT_CDIV_PH1, 0x8},
+ {DVBT_SCALE1_B92, 0x4},
+ {DVBT_SCALE1_B93, 0xb0},
+ {DVBT_SCALE1_BA7, 0x78},
+ {DVBT_SCALE1_BA9, 0x28},
+ {DVBT_SCALE1_BAA, 0x59},
+ {DVBT_SCALE1_BAB, 0x83},
+ {DVBT_SCALE1_BAC, 0xd4},
+ {DVBT_SCALE1_BB0, 0x65},
+ {DVBT_SCALE1_BB1, 0x43},
+ {DVBT_KB_P1, 0x1},
+ {DVBT_KB_P2, 0x4},
+ {DVBT_KB_P3, 0x7},
+ {DVBT_K1_CR_STEP12, 0xa},
+ {DVBT_REG_GPE, 0x1},
+ {DVBT_SERIAL, 0x0},
+ {DVBT_CDIV_PH0, 0x9},
+ {DVBT_CDIV_PH1, 0x9},
+ {DVBT_MPEG_IO_OPT_2_2, 0x0},
+ {DVBT_MPEG_IO_OPT_1_0, 0x0},
+ {DVBT_TRK_KS_P2, 0x4},
+ {DVBT_TRK_KS_I2, 0x7},
+ {DVBT_TR_THD_SET2, 0x6},
+ {DVBT_TRK_KC_I2, 0x5},
+ {DVBT_CR_THD_SET2, 0x1},
+ {DVBT_SPEC_INV, 0x0},
+ {DVBT_DAGC_TRG_VAL, 0x5a},
+ {DVBT_AGC_TARG_VAL_0, 0x0},
+ {DVBT_AGC_TARG_VAL_8_1, 0x5a},
+ {DVBT_AAGC_LOOP_GAIN, 0x16},
+ {DVBT_LOOP_GAIN2_3_0, 0x6},
+ {DVBT_LOOP_GAIN2_4, 0x1},
+ {DVBT_LOOP_GAIN3, 0x16},
+ {DVBT_VTOP1, 0x35},
+ {DVBT_VTOP2, 0x21},
+ {DVBT_VTOP3, 0x21},
+ {DVBT_KRF1, 0x0},
+ {DVBT_KRF2, 0x40},
+ {DVBT_KRF3, 0x10},
+ {DVBT_KRF4, 0x10},
+ {DVBT_IF_AGC_MIN, 0x80},
+ {DVBT_IF_AGC_MAX, 0x7f},
+ {DVBT_RF_AGC_MIN, 0x80},
+ {DVBT_RF_AGC_MAX, 0x7f},
+ {DVBT_POLAR_RF_AGC, 0x0},
+ {DVBT_POLAR_IF_AGC, 0x0},
+ {DVBT_AD7_SETTING, 0xe9bf},
+ {DVBT_EN_GI_PGA, 0x0},
+ {DVBT_THD_LOCK_UP, 0x0},
+ {DVBT_THD_LOCK_DW, 0x0},
+ {DVBT_THD_UP1, 0x11},
+ {DVBT_THD_DW1, 0xef},
+ {DVBT_INTER_CNT_LEN, 0xc},
+ {DVBT_GI_PGA_STATE, 0x0},
+ {DVBT_EN_AGC_PGA, 0x1},
+ {DVBT_IF_AGC_MAN, 0x0},
+ };
+
+
+ dbg("%s", __func__);
+
+ en_bbin = (priv->cfg.if_dvbt == 0 ? 0x1 : 0x0);
+
+ /*
+ * PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
+ * / CrystalFreqHz)
+ */
+ pset_iffreq = priv->cfg.if_dvbt % priv->cfg.xtal;
+ pset_iffreq *= 0x400000;
+ pset_iffreq = div_u64(pset_iffreq, priv->cfg.xtal);
+ pset_iffreq = pset_iffreq & 0x3fffff;
+
+
+
+ for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
+ ret = rtl2832_wr_demod_reg(priv, rtl2832_initial_regs[i].reg,
+ rtl2832_initial_regs[i].value);
+ if (ret)
+ goto err;
+ }
+
+ /* if frequency settings */
+ ret = rtl2832_wr_demod_reg(priv, DVBT_EN_BBIN, en_bbin);
+ if (ret)
+ goto err;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_PSET_IFFREQ, pset_iffreq);
+ if (ret)
+ goto err;
+
+ priv->sleeping = false;
+
+ return ret;
+
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int rtl2832_sleep(struct dvb_frontend *fe)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+
+ dbg("%s", __func__);
+ priv->sleeping = true;
+ return 0;
+}
+
+int rtl2832_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *s)
+{
+ dbg("%s", __func__);
+ s->min_delay_ms = 1000;
+ s->step_size = fe->ops.info.frequency_stepsize * 2;
+ s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
+ return 0;
+}
+
+static int rtl2832_set_frontend(struct dvb_frontend *fe)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int ret, i, j;
+ u64 bw_mode, num, num2;
+ u32 resamp_ratio, cfreq_off_ratio;
+
+
+ static u8 bw_params[3][32] = {
+ /* 6 MHz bandwidth */
+ {
+ 0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f,
+ 0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2,
+ 0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67,
+ 0x19, 0xe0,
+ },
+
+ /* 7 MHz bandwidth */
+ {
+ 0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf,
+ 0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30,
+ 0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22,
+ 0x19, 0x10,
+ },
+
+ /* 8 MHz bandwidth */
+ {
+ 0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf,
+ 0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7,
+ 0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8,
+ 0x19, 0xe0,
+ },
+ };
+
+
+ dbg("%s: frequency=%d bandwidth_hz=%d inversion=%d", __func__,
+ c->frequency, c->bandwidth_hz, c->inversion);
+
+
+ /* program tuner */
+ if (fe->ops.tuner_ops.set_params)
+ fe->ops.tuner_ops.set_params(fe);
+
+
+ switch (c->bandwidth_hz) {
+ case 6000000:
+ i = 0;
+ bw_mode = 48000000;
+ break;
+ case 7000000:
+ i = 1;
+ bw_mode = 56000000;
+ break;
+ case 8000000:
+ i = 2;
+ bw_mode = 64000000;
+ break;
+ default:
+ dbg("invalid bandwidth");
+ return -EINVAL;
+ }
+
+ for (j = 0; j < sizeof(bw_params[j]); j++) {
+ ret = rtl2832_wr_regs(priv, 0x1c+j, 1, &bw_params[i][j], 1);
+ if (ret)
+ goto err;
+ }
+
+ /* calculate and set resample ratio
+ * RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22)
+ * / ConstWithBandwidthMode)
+ */
+ num = priv->cfg.xtal * 7;
+ num *= 0x400000;
+ num = div_u64(num, bw_mode);
+ resamp_ratio = num & 0x3ffffff;
+ ret = rtl2832_wr_demod_reg(priv, DVBT_RSAMP_RATIO, resamp_ratio);
+ if (ret)
+ goto err;
+
+ /* calculate and set cfreq off ratio
+ * CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20)
+ * / (CrystalFreqHz * 7))
+ */
+ num = bw_mode << 20;
+ num2 = priv->cfg.xtal * 7;
+ num = div_u64(num, num2);
+ num = -num;
+ cfreq_off_ratio = num & 0xfffff;
+ ret = rtl2832_wr_demod_reg(priv, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio);
+ if (ret)
+ goto err;
+
+
+ /* soft reset */
+ ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x1);
+ if (ret)
+ goto err;
+
+ ret = rtl2832_wr_demod_reg(priv, DVBT_SOFT_RST, 0x0);
+ if (ret)
+ goto err;
+
+ return ret;
+err:
+ info("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+ int ret;
+ u32 tmp;
+ *status = 0;
+
+
+ dbg("%s", __func__);
+ if (priv->sleeping)
+ return 0;
+
+ ret = rtl2832_rd_demod_reg(priv, DVBT_FSM_STAGE, &tmp);
+ if (ret)
+ goto err;
+
+ if (tmp == 11) {
+ *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
+ FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+ }
+ /* TODO find out if this is also true for rtl2832? */
+ /*else if (tmp == 10) {
+ *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
+ FE_HAS_VITERBI;
+ }*/
+
+ return ret;
+err:
+ info("%s: failed=%d", __func__, ret);
+ return ret;
+}
+
+static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ *snr = 0;
+ return 0;
+}
+
+static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ *ber = 0;
+ return 0;
+}
+
+static int rtl2832_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ *ucblocks = 0;
+ return 0;
+}
+
+
+static int rtl2832_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ *strength = 0;
+ return 0;
+}
+
+static struct dvb_frontend_ops rtl2832_ops;
+
+static void rtl2832_release(struct dvb_frontend *fe)
+{
+ struct rtl2832_priv *priv = fe->demodulator_priv;
+
+ dbg("%s", __func__);
+ kfree(priv);
+}
+
+struct dvb_frontend *rtl2832_attach(const struct rtl2832_config *cfg,
+ struct i2c_adapter *i2c)
+{
+ struct rtl2832_priv *priv = NULL;
+ int ret = 0;
+ u8 tmp;
+
+ dbg("%s", __func__);
+
+ /* allocate memory for the internal state */
+ priv = kzalloc(sizeof(struct rtl2832_priv), GFP_KERNEL);
+ if (priv == NULL)
+ goto err;
+
+ /* setup the priv */
+ priv->i2c = i2c;
+ priv->tuner = cfg->tuner;
+ memcpy(&priv->cfg, cfg, sizeof(struct rtl2832_config));
+
+ /* check if the demod is there */
+ ret = rtl2832_rd_reg(priv, 0x00, 0x0, &tmp);
+ if (ret)
+ goto err;
+
+ /* create dvb_frontend */
+ memcpy(&priv->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops));
+ priv->fe.demodulator_priv = priv;
+
+ /* TODO implement sleep mode */
+ priv->sleeping = true;
+
+ return &priv->fe;
+err:
+ dbg("%s: failed=%d", __func__, ret);
+ kfree(priv);
+ return NULL;
+}
+EXPORT_SYMBOL(rtl2832_attach);
+
+static struct dvb_frontend_ops rtl2832_ops = {
+ .delsys = { SYS_DVBT },
+ .info = {
+ .name = "Realtek RTL2832 (DVB-T)",
+ .frequency_min = 174000000,
+ .frequency_max = 862000000,
+ .frequency_stepsize = 166667,
+ .caps = FE_CAN_FEC_1_2 |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO |
+ FE_CAN_RECOVER |
+ FE_CAN_MUTE_TS
+ },
+
+ .release = rtl2832_release,
+
+ .init = rtl2832_init,
+ .sleep = rtl2832_sleep,
+
+ .get_tune_settings = rtl2832_get_tune_settings,
+
+ .set_frontend = rtl2832_set_frontend,
+
+ .read_status = rtl2832_read_status,
+ .read_snr = rtl2832_read_snr,
+ .read_ber = rtl2832_read_ber,
+ .read_ucblocks = rtl2832_read_ucblocks,
+ .read_signal_strength = rtl2832_read_signal_strength,
+ .i2c_gate_ctrl = rtl2832_i2c_gate_ctrl,
+};
+
+MODULE_AUTHOR("Thomas Mair <mair.thomas86@gmail.com>");
+MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.5");
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff