ARM: dts: rockchip: enable usb for rk3229 evb board

Rockchip's rk3229 evaluation board has one usb otg controller
and three usb host controllers. Each usb controller connect
with one usb2 phy port through UTMI+ interface. And the three
usb host interfaces use the same GPIO VBUS drive. Let's enable
them to support usb on rk3229 evb board.

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 275092a950efa50afb60861ae422d92de0354b38..1b55192b7d04683ce464eb824f45cee43fd4c486 100644 (file)
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -58,6 +58,17 @@
                #clock-cells = <0>;
        };
 
+       vcc_host: vcc-host-regulator {
+               compatible = "regulator-fixed";
+               enable-active-high;
+               gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&host_vbus_drv>;
+               regulator-name = "vcc_host";
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
        vcc_phy: vcc-phy-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
@@ -85,6 +96,69 @@
        status = "okay";
 };
 
+&pinctrl {
+       usb {
+               host_vbus_drv: host-vbus-drv {
+                       rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
 &uart2 {
        status = "okay";
 };
+
+&u2phy0 {
+       status = "okay";
+
+       u2phy0_otg: otg-port {
+               status = "okay";
+       };
+
+       u2phy0_host: host-port {
+               phy-supply = <&vcc_host>;
+               status = "okay";
+       };
+};
+
+&u2phy1 {
+       status = "okay";
+
+       u2phy1_otg: otg-port {
+               phy-supply = <&vcc_host>;
+               status = "okay";
+       };
+
+       u2phy1_host: host-port {
+               phy-supply = <&vcc_host>;
+               status = "okay";
+       };
+};
+
+&usb_host0_ehci {
+       status = "okay";
+};
+
+&usb_host0_ohci {
+       status = "okay";
+};
+
+&usb_host1_ehci {
+       status = "okay";
+};
+
+&usb_host1_ohci {
+       status = "okay";
+};
+
+&usb_host2_ehci {
+       status = "okay";
+};
+
+&usb_host2_ohci {
+       status = "okay";
+};
+
+&usb_otg {
+       status = "okay";
+};