ARM: dts: gose: Enable SCIF_CLK frequency and pins

Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.

This increases the range and accuracy of supported baud rates.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 2fa052036dbc00401da21fada3c0fd4ed319a930..cfe142c2ba3890316977021b1a64c788669e118b 100644 (file)
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -236,6 +236,9 @@
 };
 
 &pfc {
+       pinctrl-0 = <&scif_clk_pins>;
+       pinctrl-names = "default";
+
        i2c2_pins: i2c2 {
                renesas,groups = "i2c2";
                renesas,function = "i2c2";
@@ -256,6 +259,11 @@
                renesas,function = "scif1";
        };
 
+       scif_clk_pins: scif_clk {
+               renesas,groups = "scif_clk";
+               renesas,function = "scif_clk";
+       };
+
        ether_pins: ether {
                renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
                renesas,function = "eth";
@@ -316,6 +324,11 @@
        status = "okay";
 };
 
+&scif_clk {
+       clock-frequency = <14745600>;
+       status = "okay";
+};
+
 &qspi {
        pinctrl-0 = <&qspi_pins>;
        pinctrl-names = "default";