return -EINVAL;
policy->cur = policy->min = policy->max = imx_get_speed(0);
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.min_freq = 8000;
policy->cpuinfo.max_freq = 200000;
/* Manual states, that PLL stabilizes in two CLK32 periods */
if (policy->cpu != 0)
return -EINVAL;
policy->cur = policy->min = policy->max = sa11x0_getspeed(0);
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.min_freq = 59000;
policy->cpuinfo.max_freq = 287000;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
if (policy->cpu != 0)
return -EINVAL;
policy->cur = policy->min = policy->max = omap_getspeed(0);
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
if (policy->cpu != 0)
return -EINVAL;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
/*Now ,only support one cpu */
policy->cur = bf533_getfreq(0);
policy->cpuinfo.transition_latency =
perf->states[i].transition_latency * 1000;
}
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
data->max_freq = perf->states[0].core_frequency * 1000;
/* table init */
policy->cur = nforce2_get(policy->cpu);
policy->min = policy->cpuinfo.min_freq;
policy->max = policy->cpuinfo.max_freq;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
return 0;
}
f_table[k].frequency = CPUFREQ_TABLE_END;
}
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */
policy->cur = fsb * current_multiplier;
}
/* cpuinfo and default policy values */
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = elanfreq_get_cpu_frequency(0);
policy->min = maxfreq / POLICY_MIN_DIV;
policy->max = maxfreq;
policy->cur = curfreq;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.min_freq = maxfreq / max_duration;
policy->cpuinfo.max_freq = maxfreq;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
longhaul_setup_voltagescaling();
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 200000; /* nsec */
policy->cur = calc_speed(longhaul_get_cpu_mult());
cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
/* cpuinfo and default policy values */
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 1000000; /* assumed */
policy->cur = stock_freq;
}
/* cpuinfo and default policy values */
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = busfreq * max_multiplier;
printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
minimum_speed/1000, maximum_speed/1000);
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency);
policy->cur = powernow_get(0);
/* run on any CPU again */
set_cpus_allowed(current, oldmask);
- pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
if (cpu_family == CPU_HW_PSTATE)
pol->cpus = cpumask_of_cpu(pol->cpu);
else
return -ENODEV;
/* cpuinfo and default policy values */
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 1000000; /* 1ms */
policy->cur = sc520_freq_get_cpu_frequency(0);
freq = get_cur_freq(policy->cpu);
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
policy->cur = freq;
(speed / 1000));
/* cpuinfo and default policy values */
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cur = speed;
result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
(speed / 1000));
/* cpuinfo and default policy values */
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = speed;
data->acpi_data.states[i].transition_latency * 1000;
}
}
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
policy->cur = processor_get_freq(data, policy->cpu);
/* table init */
pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
}
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
/* if DEBUG is enabled set_pmode() measures the latency
* of a transition */
policy->cpuinfo.transition_latency = 25000;
pr_debug("%d: %d\n", i, pas_freqs[i].frequency);
}
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
policy->cpuinfo.transition_latency = get_gizmo_latency();
cur_astate = get_cur_astate(policy->cpu);
if (policy->cpu != 0)
return -ENODEV;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = cur_freq;
static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
/* secondary CPUs are tied to the primary one by the
policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cur = sh_cpufreq_get(policy->cpu);
policy->min = policy->cpuinfo.min_freq;
policy->max = policy->cpuinfo.max_freq;
table[2].index = 5;
table[3].frequency = CPUFREQ_TABLE_END;
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 0;
policy->cur = clock_tick;
init_completion(&policy->kobj_unregister);
INIT_WORK(&policy->update, handle_update);
+ /* Set governor before ->init, so that driver could check it */
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
/* call driver. From then on the cpufreq must be able
* to accept all calls to ->verify and ->setpolicy for this CPU
*/