usb: gadget: omap_udc: make checkpatch.pl happy
authorFelipe Balbi <balbi@ti.com>
Tue, 29 May 2012 11:26:09 +0000 (14:26 +0300)
committerFelipe Balbi <balbi@ti.com>
Sun, 3 Jun 2012 20:11:29 +0000 (23:11 +0300)
This patch is just a cleanup patch to make
checkpatch.pl a little happier with the
omap_udc.c driver.

No functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/gadget/omap_udc.c

index 24d81dcb7b4b1a45748435c4844334155fa46f2b..aa2d174a25210dcd3eb28676a2aeedd8a50cfad1 100644 (file)
@@ -36,9 +36,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 #include <linux/prefetch.h>
+#include <linux/io.h>
 
 #include <asm/byteorder.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 #ifdef USE_ISO
 static unsigned fifo_mode = 3;
 #else
-static unsigned fifo_mode = 0;
+static unsigned fifo_mode;
 #endif
 
 /* "modprobe omap_udc fifo_mode=42", or else as a kernel
  * boot parameter "omap_udc:fifo_mode=42"
  */
-module_param (fifo_mode, uint, 0);
-MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
+module_param(fifo_mode, uint, 0);
+MODULE_PARM_DESC(fifo_mode, "endpoint configuration");
 
 #ifdef USE_DMA
 static bool use_dma = 1;
@@ -99,8 +99,8 @@ static bool use_dma = 1;
 /* "modprobe omap_udc use_dma=y", or else as a kernel
  * boot parameter "omap_udc:use_dma=y"
  */
-module_param (use_dma, bool, 0);
-MODULE_PARM_DESC (use_dma, "enable/disable DMA");
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable DMA");
 #else  /* !USE_DMA */
 
 /* save a bit of code */
@@ -108,8 +108,8 @@ MODULE_PARM_DESC (use_dma, "enable/disable DMA");
 #endif /* !USE_DMA */
 
 
-static const char driver_name [] = "omap_udc";
-static const char driver_desc [] = DRIVER_DESC;
+static const char driver_name[] = "omap_udc";
+static const char driver_desc[] = DRIVER_DESC;
 
 /*-------------------------------------------------------------------------*/
 
@@ -247,7 +247,7 @@ static int omap_ep_disable(struct usb_ep *_ep)
 
        spin_lock_irqsave(&ep->udc->lock, flags);
        ep->ep.desc = NULL;
-       nuke (ep, -ESHUTDOWN);
+       nuke(ep, -ESHUTDOWN);
        ep->ep.maxpacket = ep->maxpacket;
        ep->has_dma = 0;
        omap_writew(UDC_SET_HALT, UDC_CTRL);
@@ -270,7 +270,7 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
        req = kzalloc(sizeof(*req), gfp_flags);
        if (req) {
                req->req.dma = DMA_ADDR_INVALID;
-               INIT_LIST_HEAD (&req->queue);
+               INIT_LIST_HEAD(&req->queue);
        }
        return &req->req;
 }
@@ -281,7 +281,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req)
        struct omap_req *req = container_of(_req, struct omap_req, req);
 
        if (_req)
-               kfree (req);
+               kfree(req);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -361,10 +361,10 @@ write_packet(u8 *buf, struct omap_req *req, unsigned max)
        return len;
 }
 
-// FIXME change r/w fifo calling convention
+/* FIXME change r/w fifo calling convention */
 
 
-// return:  0 = still running, 1 = completed, negative = errno
+/* return:  0 = still running, 1 = completed, negative = errno */
 static int write_fifo(struct omap_ep *ep, struct omap_req *req)
 {
        u8              *buf;
@@ -426,7 +426,7 @@ read_packet(u8 *buf, struct omap_req *req, unsigned avail)
        return len;
 }
 
-// return:  0 = still running, 1 = queue empty, negative = errno
+/* return:  0 = still running, 1 = queue empty, negative = errno */
 static int read_fifo(struct omap_ep *ep, struct omap_req *req)
 {
        u8              *buf;
@@ -662,7 +662,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
                }
                omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC);
 
-               if (!list_empty (&ep->queue)) {
+               if (!list_empty(&ep->queue)) {
                        req = container_of(ep->queue.next,
                                        struct omap_req, queue);
                        next_in_dma(ep, req);
@@ -681,7 +681,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
                }
                omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC);
 
-               if (!list_empty (&ep->queue)) {
+               if (!list_empty(&ep->queue)) {
                        req = container_of(ep->queue.next,
                                        struct omap_req, queue);
                        next_out_dma(ep, req);
@@ -954,7 +954,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
                int     is_in;
 
                if (ep->bEndpointAddress == 0) {
-                       if (!udc->ep0_pending || !list_empty (&ep->queue)) {
+                       if (!udc->ep0_pending || !list_empty(&ep->queue)) {
                                spin_unlock_irqrestore(&udc->lock, flags);
                                return -EL2HLT;
                        }
@@ -981,7 +981,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
                                 * always an IN ... even for IN transfers,
                                 * a weird case which seem to stall OMAP.
                                 */
-                               omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+                               omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+                                               UDC_EP_NUM);
                                omap_writew(UDC_CLR_EP, UDC_CTRL);
                                omap_writew(UDC_SET_FIFO_EN, UDC_CTRL);
                                omap_writew(UDC_EP_DIR, UDC_EP_NUM);
@@ -993,7 +994,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
                        /* non-empty DATA stage */
                        } else if (is_in) {
-                               omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM);
+                               omap_writew(UDC_EP_SEL | UDC_EP_DIR,
+                                               UDC_EP_NUM);
                        } else {
                                if (udc->ep0_setup)
                                        goto irq_wait;
@@ -1041,7 +1043,7 @@ static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
        spin_lock_irqsave(&ep->udc->lock, flags);
 
        /* make sure it's actually queued on this endpoint */
-       list_for_each_entry (req, &ep->queue, queue) {
+       list_for_each_entry(req, &ep->queue, queue) {
                if (&req->req == _req)
                        break;
        }
@@ -1148,8 +1150,8 @@ static struct usb_ep_ops omap_ep_ops = {
        .dequeue        = omap_ep_dequeue,
 
        .set_halt       = omap_ep_set_halt,
-       // fifo_status ... report bytes in fifo
-       // fifo_flush ... flush fifo
+       /* fifo_status ... report bytes in fifo */
+       /* fifo_flush ... flush fifo */
 };
 
 /*-------------------------------------------------------------------------*/
@@ -1379,7 +1381,7 @@ static void udc_quiesce(struct omap_udc *udc)
 
        udc->gadget.speed = USB_SPEED_UNKNOWN;
        nuke(&udc->ep[0], -ESHUTDOWN);
-       list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list)
+       list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list)
                nuke(ep, -ESHUTDOWN);
 }
 
@@ -1495,7 +1497,8 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
                                /* read next OUT packet of request, maybe
                                 * reactiviting the fifo; stall on errors.
                                 */
-                               if (!req || (stat = read_fifo(ep0, req)) < 0) {
+                               stat = read_fifo(ep0, req);
+                               if (!req || stat < 0) {
                                        omap_writew(UDC_STALL_CMD, UDC_SYSCON2);
                                        udc->ep0_pending = 0;
                                        stat = 0;
@@ -1628,7 +1631,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
                                /* this has rude side-effects (aborts) and
                                 * can't really work if DMA-IN is active
                                 */
-                               DBG("%s host set_halt, NYET \n", ep->name);
+                               DBG("%s host set_halt, NYET\n", ep->name);
                                goto do_stall;
                        }
                        use_ep(ep, 0);
@@ -1719,7 +1722,7 @@ delegate:
                         */
                        udc->ep0_setup = 1;
                        spin_unlock(&udc->lock);
-                       status = udc->driver->setup (&udc->gadget, &u.r);
+                       status = udc->driver->setup(&udc->gadget, &u.r);
                        spin_lock(&udc->lock);
                        udc->ep0_setup = 0;
                }
@@ -1764,7 +1767,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
                                VDBG("connect\n");
                                if (!udc->transceiver)
                                        pullup_enable(udc);
-                               // if (driver->connect) call it
+                               /* if (driver->connect) call it */
                        } else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
                                udc->gadget.speed = USB_SPEED_UNKNOWN;
                                if (!udc->transceiver)
@@ -1796,7 +1799,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
        }
        if (change & UDC_SUS) {
                if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
-                       // FIXME tell isp1301 to suspend/resume (?)
+                       /* FIXME tell isp1301 to suspend/resume (?) */
                        if (devstat & UDC_SUS) {
                                VDBG("suspend\n");
                                update_otg(udc);
@@ -1999,7 +2002,7 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
        spin_lock_irqsave(&udc->lock, flags);
 
        /* handle all non-DMA ISO transfers */
-       list_for_each_entry (ep, &udc->iso, iso) {
+       list_for_each_entry(ep, &udc->iso, iso) {
                u16             stat;
                struct omap_req *req;
 
@@ -2058,11 +2061,11 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev)
 
 static inline int machine_without_vbus_sense(void)
 {
-       return (machine_is_omap_innovator()
+       return machine_is_omap_innovator()
                || machine_is_omap_osk()
                || machine_is_sx1()
-               || cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */
-               );
+               /* No known omap7xx boards with vbus sense */
+               || cpu_is_omap7xx();
 }
 
 static int omap_udc_start(struct usb_gadget_driver *driver,
@@ -2076,7 +2079,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
        if (!udc)
                return -ENODEV;
        if (!driver
-                       // FIXME if otg, check:  driver->is_otg
+                       /* FIXME if otg, check:  driver->is_otg */
                        || driver->max_speed < USB_SPEED_FULL
                        || !bind || !driver->setup)
                return -EINVAL;
@@ -2088,7 +2091,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
        }
 
        /* reset state */
-       list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+       list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
                ep->irqs = 0;
                if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
                        continue;
@@ -2126,7 +2129,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
                if (status < 0) {
                        ERR("can't bind to transceiver\n");
                        if (driver->unbind) {
-                               driver->unbind (&udc->gadget);
+                               driver->unbind(&udc->gadget);
                                udc->gadget.dev.driver = NULL;
                                udc->driver = NULL;
                        }
@@ -2134,9 +2137,9 @@ static int omap_udc_start(struct usb_gadget_driver *driver,
                }
        } else {
                if (can_pullup(udc))
-                       pullup_enable (udc);
+                       pullup_enable(udc);
                else
-                       pullup_disable (udc);
+                       pullup_disable(udc);
        }
 
        /* boards that don't have VBUS sensing can't autogate 48MHz;
@@ -2195,7 +2198,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver)
 static const char proc_filename[] = "driver/udc";
 
 #define FOURBITS "%s%s%s%s"
-#define EIGHTBITS FOURBITS FOURBITS
+#define EIGHTBITS "%s%s%s%s%s%s%s%s"
 
 static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 {
@@ -2217,12 +2220,21 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
                "\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
                ep->name, buf,
                ep->double_buf ? "dbuf " : "",
-               ({char *s; switch(ep->ackwait){
-               case 0: s = ""; break;
-               case 1: s = "(ackw) "; break;
-               case 2: s = "(ackw2) "; break;
-               default: s = "(?) "; break;
-               } s;}),
+               ({ char *s;
+               switch (ep->ackwait) {
+               case 0:
+                       s = "";
+                       break;
+               case 1:
+                       s = "(ackw) ";
+                       break;
+               case 2:
+                       s = "(ackw2) ";
+                       break;
+               default:
+                       s = "(?) ";
+                       break;
+               } s; }),
                ep->irqs, stat_flg,
                (stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
                (stat_flg & UDC_MISS_IN) ? "miss_in " : "",
@@ -2238,10 +2250,10 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
                (stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
                (stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
 
-       if (list_empty (&ep->queue))
+       if (list_empty(&ep->queue))
                seq_printf(s, "\t(queue empty)\n");
        else
-               list_for_each_entry (req, &ep->queue, queue) {
+               list_for_each_entry(req, &ep->queue, queue) {
                        unsigned        length = req->req.actual;
 
                        if (use_dma && buf[0]) {
@@ -2259,11 +2271,16 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
 static char *trx_mode(unsigned m, int enabled)
 {
        switch (m) {
-       case 0:         return enabled ? "*6wire" : "unused";
-       case 1:         return "4wire";
-       case 2:         return "3wire";
-       case 3:         return "6wire";
-       default:        return "unknown";
+       case 0:
+               return enabled ? "*6wire" : "unused";
+       case 1:
+               return "4wire";
+       case 2:
+               return "3wire";
+       case 3:
+               return "6wire";
+       default:
+               return "unknown";
        }
 }
 
@@ -2295,7 +2312,7 @@ static int proc_otg_show(struct seq_file *s)
                        " b_ase_brst=%d hmc=%d\n", tmp,
                (tmp & OTG_EN) ? " otg_en" : "",
                (tmp & USBX_SYNCHRO) ? " synchro" : "",
-               // much more SRP stuff
+               /* much more SRP stuff */
                (tmp & SRP_DATA) ? " srp_data" : "",
                (tmp & SRP_VBUS) ? " srp_vbus" : "",
                (tmp & OTG_PADEN) ? " otg_paden" : "",
@@ -2383,7 +2400,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
                (tmp & UDC_SELF_PWR) ? " self_pwr" : "",
                (tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
                (tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
-       // syscon2 is write-only
+       /* syscon2 is write-only */
 
        /* UDC controller registers */
        if (!(tmp & UDC_PULLUP_EN)) {
@@ -2467,7 +2484,7 @@ static int proc_udc_show(struct seq_file *s, void *_)
        if (tmp & UDC_ATT) {
                proc_ep_show(s, &udc->ep[0]);
                if (tmp & UDC_ADD) {
-                       list_for_each_entry (ep, &udc->gadget.ep_list,
+                       list_for_each_entry(ep, &udc->gadget.ep_list,
                                        ep.ep_list) {
                                if (ep->ep.desc)
                                        proc_ep_show(s, ep);
@@ -2536,14 +2553,29 @@ omap_ep_setup(char *name, u8 addr, u8 type,
        /* chip setup ... bit values are same for IN, OUT */
        if (type == USB_ENDPOINT_XFER_ISOC) {
                switch (maxp) {
-               case 8:         epn_rxtx = 0 << 12; break;
-               case 16:        epn_rxtx = 1 << 12; break;
-               case 32:        epn_rxtx = 2 << 12; break;
-               case 64:        epn_rxtx = 3 << 12; break;
-               case 128:       epn_rxtx = 4 << 12; break;
-               case 256:       epn_rxtx = 5 << 12; break;
-               case 512:       epn_rxtx = 6 << 12; break;
-               default:        BUG();
+               case 8:
+                       epn_rxtx = 0 << 12;
+                       break;
+               case 16:
+                       epn_rxtx = 1 << 12;
+                       break;
+               case 32:
+                       epn_rxtx = 2 << 12;
+                       break;
+               case 64:
+                       epn_rxtx = 3 << 12;
+                       break;
+               case 128:
+                       epn_rxtx = 4 << 12;
+                       break;
+               case 256:
+                       epn_rxtx = 5 << 12;
+                       break;
+               case 512:
+                       epn_rxtx = 6 << 12;
+                       break;
+               default:
+                       BUG();
                }
                epn_rxtx |= UDC_EPN_RX_ISO;
                dbuf = 1;
@@ -2556,11 +2588,20 @@ omap_ep_setup(char *name, u8 addr, u8 type,
                        dbuf = 0;
 
                switch (maxp) {
-               case 8:         epn_rxtx = 0 << 12; break;
-               case 16:        epn_rxtx = 1 << 12; break;
-               case 32:        epn_rxtx = 2 << 12; break;
-               case 64:        epn_rxtx = 3 << 12; break;
-               default:        BUG();
+               case 8:
+                       epn_rxtx = 0 << 12;
+                       break;
+               case 16:
+                       epn_rxtx = 1 << 12;
+                       break;
+               case 32:
+                       epn_rxtx = 2 << 12;
+                       break;
+               case 64:
+                       epn_rxtx = 3 << 12;
+                       break;
+               default:
+                       BUG();
                }
                if (dbuf && addr)
                        epn_rxtx |= UDC_EPN_RX_DB;
@@ -2600,7 +2641,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
        ep->ep.name = ep->name;
        ep->ep.ops = &omap_ep_ops;
        ep->ep.maxpacket = ep->maxpacket = maxp;
-       list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list);
+       list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 
        return buf;
 }
@@ -2608,7 +2649,7 @@ omap_ep_setup(char *name, u8 addr, u8 type,
 static void omap_udc_release(struct device *dev)
 {
        complete(udc->done);
-       kfree (udc);
+       kfree(udc);
        udc = NULL;
 }
 
@@ -2626,13 +2667,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
        omap_writew(0, UDC_TXDMA_CFG);
 
        /* UDC_PULLUP_EN gates the chip clock */
-       // OTG_SYSCON_1 |= DEV_IDLE_EN;
+       /* OTG_SYSCON_1 |= DEV_IDLE_EN; */
 
        udc = kzalloc(sizeof(*udc), GFP_KERNEL);
        if (!udc)
                return -ENOMEM;
 
-       spin_lock_init (&udc->lock);
+       spin_lock_init(&udc->lock);
 
        udc->gadget.ops = &omap_gadget_ops;
        udc->gadget.ep0 = &udc->ep[0].ep;
@@ -2662,13 +2703,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
                omap_writew(0, UDC_EP_TX(tmp));
        }
 
-#define OMAP_BULK_EP(name,addr) \
+#define OMAP_BULK_EP(name, addr) \
        buf = omap_ep_setup(name "-bulk", addr, \
                        USB_ENDPOINT_XFER_BULK, buf, 64, 1);
-#define OMAP_INT_EP(name,addr, maxp) \
+#define OMAP_INT_EP(name, addr, maxp) \
        buf = omap_ep_setup(name "-int", addr, \
                        USB_ENDPOINT_XFER_INT, buf, maxp, 0);
-#define OMAP_ISO_EP(name,addr, maxp) \
+#define OMAP_ISO_EP(name, addr, maxp) \
        buf = omap_ep_setup(name "-iso", addr, \
                        USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
 
@@ -2869,11 +2910,11 @@ bad_on_1710:
 
        /* a "gadget" abstracts/virtualizes the controller */
        status = omap_udc_setup(pdev, xceiv);
-       if (status) {
+       if (status)
                goto cleanup0;
-       }
+
        xceiv = NULL;
-       // "udc" is now valid
+       /* "udc" is now valid */
        pullup_disable(udc);
 #if    defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
        udc->gadget.is_otg = (config->otg != 0);
@@ -2887,7 +2928,7 @@ bad_on_1710:
 
        /* USB general purpose IRQ:  ep0, state changes, dma, etc */
        status = request_irq(pdev->resource[1].start, omap_udc_irq,
-                       IRQF_SAMPLE_RANDOM, driver_name, udc);
+                       0, driver_name, udc);
        if (status != 0) {
                ERR("can't get irq %d, err %d\n",
                        (int) pdev->resource[1].start, status);
@@ -2896,7 +2937,7 @@ bad_on_1710:
 
        /* USB "non-iso" IRQ (PIO for all but ep0) */
        status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
-                       IRQF_SAMPLE_RANDOM, "omap_udc pio", udc);
+                       0, "omap_udc pio", udc);
        if (status != 0) {
                ERR("can't get irq %d, err %d\n",
                        (int) pdev->resource[2].start, status);
@@ -2939,7 +2980,7 @@ cleanup2:
        free_irq(pdev->resource[1].start, udc);
 
 cleanup1:
-       kfree (udc);
+       kfree(udc);
        udc = NULL;
 
 cleanup0: