resource_size_t size = res->end - res->start + 1;
u64 sa;
- /* Calculate window size */
- sa = (0xffffffffffffffffull << ilog2(size));;
- if (res->flags & IORESOURCE_PREFETCH)
- sa |= 0x8;
+ if (port->endpoint) {
+ resource_size_t ep_addr = 0;
+ resource_size_t ep_size = 32 << 20;
+
+ /* Currently we map a fixed 64MByte window to PLB address
+ * 0 (SDRAM). This should probably be configurable via a dts
+ * property.
+ */
+
+ /* Calculate window size */
+ sa = (0xffffffffffffffffull << ilog2(ep_size));;
+
+ /* Setup BAR0 */
+ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa) |
+ PCI_BASE_ADDRESS_MEM_TYPE_64);
- out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
- out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+ /* Disable BAR1 & BAR2 */
+ out_le32(mbase + PECFG_BAR1MPA, 0);
+ out_le32(mbase + PECFG_BAR2HMPA, 0);
+ out_le32(mbase + PECFG_BAR2LMPA, 0);
- /* The setup of the split looks weird to me ... let's see if it works */
- out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM01SAH, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_PIM01SAL, RES_TO_U32_LOW(sa));
+
+ out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(ep_addr));
+ out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
+ } else {
+ /* Calculate window size */
+ sa = (0xffffffffffffffffull << ilog2(size));;
+ if (res->flags & IORESOURCE_PREFETCH)
+ sa |= 0x8;
+
+ out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+ out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+
+ /* The setup of the split looks weird to me ... let's see
+ * if it works
+ */
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
+ out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
+ out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
+ }
/* Enable inbound mapping */
out_le32(mbase + PECFG_PIMEN, 0x1);
- out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
- out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
-
/* Enable I/O, Mem, and Busmaster cycles */
out_le16(mbase + PCI_COMMAND,
in_le16(mbase + PCI_COMMAND) |
const int *bus_range;
int primary = 0, busses;
void __iomem *mbase = NULL, *cfg_data = NULL;
-
- /* XXX FIXME: Handle endpoint mode properly */
- if (port->endpoint) {
- printk(KERN_WARNING "PCIE%d: Port in endpoint mode !\n",
- port->index);
- return;
- }
+ const u32 *pval;
+ u32 val;
/* Check if primary bridge */
if (of_get_property(port->node, "primary", NULL))
hose->last_busno = hose->first_busno + busses;
}
- /* We map the external config space in cfg_data and the host config
- * space in cfg_addr. External space is 1M per bus, internal space
- * is 4K
+ if (!port->endpoint) {
+ /* Only map the external config space in cfg_data for
+ * PCIe root-complexes. External space is 1M per bus
+ */
+ cfg_data = ioremap(port->cfg_space.start +
+ (hose->first_busno + 1) * 0x100000,
+ busses * 0x100000);
+ if (cfg_data == NULL) {
+ printk(KERN_ERR "%s: Can't map external config space !",
+ port->node->full_name);
+ goto fail;
+ }
+ hose->cfg_data = cfg_data;
+ }
+
+ /* Always map the host config space in cfg_addr.
+ * Internal space is 4K
*/
- cfg_data = ioremap(port->cfg_space.start +
- (hose->first_busno + 1) * 0x100000,
- busses * 0x100000);
mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
- if (cfg_data == NULL || mbase == NULL) {
- printk(KERN_ERR "%s: Can't map config space !",
+ if (mbase == NULL) {
+ printk(KERN_ERR "%s: Can't map internal config space !",
port->node->full_name);
goto fail;
}
-
- hose->cfg_data = cfg_data;
hose->cfg_addr = mbase;
pr_debug("PCIE %s, bus %d..%d\n", port->node->full_name,
port->hose = hose;
mbase = (void __iomem *)hose->cfg_addr;
- /*
- * Set bus numbers on our root port
- */
- out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
- out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
- out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+ if (!port->endpoint) {
+ /*
+ * Set bus numbers on our root port
+ */
+ out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
+ out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
+ out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+ }
/*
* OMRs are already reset, also disable PIMs
ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window);
/* The root complex doesn't show up if we don't set some vendor
- * and device IDs into it. Those are the same bogus one that the
- * initial code in arch/ppc add. We might want to change that.
+ * and device IDs into it. The defaults below are the same bogus
+ * one that the initial code in arch/ppc had. This can be
+ * overwritten by setting the "vendor-id/device-id" properties
+ * in the pciex node.
*/
- out_le16(mbase + 0x200, 0xaaa0 + port->index);
- out_le16(mbase + 0x202, 0xbed0 + port->index);
- /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
- out_le32(mbase + 0x208, 0x06040001);
+ /* Get the (optional) vendor-/device-id from the device-tree */
+ pval = of_get_property(port->node, "vendor-id", NULL);
+ if (pval) {
+ val = *pval;
+ } else {
+ if (!port->endpoint)
+ val = 0xaaa0 + port->index;
+ else
+ val = 0xeee0 + port->index;
+ }
+ out_le16(mbase + 0x200, val);
+
+ pval = of_get_property(port->node, "device-id", NULL);
+ if (pval) {
+ val = *pval;
+ } else {
+ if (!port->endpoint)
+ val = 0xbed0 + port->index;
+ else
+ val = 0xfed0 + port->index;
+ }
+ out_le16(mbase + 0x202, val);
+
+ if (!port->endpoint) {
+ /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+ out_le32(mbase + 0x208, 0x06040001);
+
+ printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
+ port->index);
+ } else {
+ /* Set Class Code to Processor/PPC */
+ out_le32(mbase + 0x208, 0x0b200001);
+
+ printk(KERN_INFO "PCIE%d: successfully set as endpoint\n",
+ port->index);
+ }
- printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
- port->index);
return;
fail:
if (hose)
const u32 *pval;
int portno;
unsigned int dcrs;
+ const char *val;
/* First, proceed to core initialization as we assume there's
* only one PCIe core in the system
}
port->sdr_base = *pval;
- /* XXX Currently, we only support root complex mode */
- port->endpoint = 0;
+ /* Check if device_type property is set to "pci" or "pci-endpoint".
+ * Resulting from this setup this PCIe port will be configured
+ * as root-complex or as endpoint.
+ */
+ val = of_get_property(port->node, "device_type", NULL);
+ if (!strcmp(val, "pci-endpoint")) {
+ port->endpoint = 1;
+ } else if (!strcmp(val, "pci")) {
+ port->endpoint = 0;
+ } else {
+ printk(KERN_ERR "PCIE: missing or incorrect device_type for %s\n",
+ np->full_name);
+ return;
+ }
/* Fetch config space registers address */
if (of_address_to_resource(np, 0, &port->cfg_space)) {
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff