In the rtlwifi/rtl8192cu, rtl8723 code is dead code.
So I remove it.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
/*-------------------------------------------------------------------------
* Chip specific
*-------------------------------------------------------------------------*/
-#define CHIP_8723 BIT(2) /* RTL8723 With BT feature */
-#define CHIP_8723_DRV_REV BIT(3) /* RTL8723 Driver Revised */
#define NORMAL_CHIP BIT(4)
#define CHIP_VENDOR_UMC BIT(5)
#define CHIP_VENDOR_UMC_B_CUT BIT(6)
-#define IS_8723_SERIES(version) \
- (((version) & CHIP_8723) ? true : false)
-
#define IS_92C_1T2R(version) \
(((version) & CHIP_92C) && ((version) & CHIP_92C_1T2R))
#define IS_VENDOR_UMC(version) \
(((version) & CHIP_VENDOR_UMC) ? true : false)
-#define IS_VENDOR_8723_A_CUT(version) \
- (((version) & CHIP_VENDOR_UMC) ? (((version) & (BIT(6))) ? \
- false : true) : false)
-
#define CHIP_BONDING_92C_1T2R 0x1
#define CHIP_BONDING_IDENTIFIER(_value) (((_value) >> 22) & 0x3)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
- struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
enum rf_pwrstate e_rfpowerstate_toset, cur_rfstate;
u8 u1tmp = 0;
bool actuallyset = false;
if (ppsc->pwrdown_mode && e_rfpowerstate_toset == ERFOFF) {
/* Enable register area 0x0-0xc. */
rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0);
- if (IS_HARDWARE_TYPE_8723U(rtlhal)) {
- /*
- * We should configure HW PDn source for WiFi
- * ONLY, and then our HW will be set in
- * power-down mode if PDn source from all
- * functions are configured.
- */
- u1tmp = rtl_read_byte(rtlpriv,
- REG_MULTI_FUNC_CTRL);
- rtl_write_byte(rtlpriv, REG_MULTI_FUNC_CTRL,
- (u1tmp|WL_HWPDN_EN));
- } else {
- rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x8812);
- }
+ rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x8812);
}
if (e_rfpowerstate_toset == ERFOFF) {
if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM)
chip_version = NORMAL_CHIP;
chip_version |= ((value32 & TYPE_ID) ? CHIP_92C : 0);
chip_version |= ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0);
- /* RTL8723 with BT function. */
- chip_version |= ((value32 & BT_FUNC) ? CHIP_8723 : 0);
if (IS_VENDOR_UMC(chip_version))
chip_version |= ((value32 & CHIP_VER_RTL_MASK) ?
CHIP_VENDOR_UMC_B_CUT : 0);
value32 = rtl_read_dword(rtlpriv, REG_HPON_FSM);
chip_version |= ((CHIP_BONDING_IDENTIFIER(value32) ==
CHIP_BONDING_92C_1T2R) ? CHIP_92C_1T2R : 0);
- } else if (IS_8723_SERIES(chip_version)) {
- value32 = rtl_read_dword(rtlpriv, REG_GPIO_OUTSTS);
- chip_version |= ((value32 & RF_RL_ID) ?
- CHIP_8723_DRV_REV : 0);
}
}
rtlhal->version = (enum version_8192c)chip_version;
case VERSION_NORMAL_UMC_CHIP_88C_B_CUT:
versionid = "NORMAL_UMC_CHIP_88C_B_CUT";
break;
- case VERSION_NORMA_UMC_CHIP_8723_1T1R_A_CUT:
- versionid = "NORMAL_UMC_CHIP_8723_1T1R_A_CUT";
- break;
- case VERSION_NORMA_UMC_CHIP_8723_1T1R_B_CUT:
- versionid = "NORMAL_UMC_CHIP_8723_1T1R_B_CUT";
- break;
case VERSION_TEST_CHIP_92C:
versionid = "TEST_CHIP_92C";
break;