phy: Add stingray SATA phy support
authorSrinath Mannam <srinath.mannam@broadcom.com>
Thu, 8 Jun 2017 11:31:39 +0000 (17:01 +0530)
committerKishon Vijay Abraham I <kishon@ti.com>
Fri, 16 Jun 2017 06:10:22 +0000 (11:40 +0530)
This patch adds support for stingray SATA phy in the
SATA BRCM phy driver.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
drivers/phy/broadcom/phy-brcm-sata.c

index ccbc3d9949982a8be160cf77e8ad2da98d0113fe..e6544c8b1ace2da80cf431eb230ab66032a844cb 100644 (file)
@@ -46,6 +46,7 @@ enum brcm_sata_phy_version {
        BRCM_SATA_PHY_STB_40NM,
        BRCM_SATA_PHY_IPROC_NS2,
        BRCM_SATA_PHY_IPROC_NSP,
+       BRCM_SATA_PHY_IPROC_SR,
 };
 
 struct brcm_sata_port {
@@ -81,12 +82,17 @@ enum sata_phy_regs {
        PLL_ACTRL2                              = 0x8b,
        PLL_ACTRL2_SELDIV_MASK                  = 0x1f,
        PLL_ACTRL2_SELDIV_SHIFT                 = 9,
+       PLL_ACTRL6                              = 0x86,
 
        PLL1_REG_BANK                           = 0x060,
        PLL1_ACTRL2                             = 0x82,
        PLL1_ACTRL3                             = 0x83,
        PLL1_ACTRL4                             = 0x84,
 
+       TX_REG_BANK                             = 0x070,
+       TX_ACTRL0                               = 0x80,
+       TX_ACTRL0_TXPOL_FLIP                    = BIT(6),
+
        OOB_REG_BANK                            = 0x150,
        OOB1_REG_BANK                           = 0x160,
        OOB_CTRL1                               = 0x80,
@@ -347,6 +353,68 @@ static int brcm_nsp_sata_init(struct brcm_sata_port *port)
        return 0;
 }
 
+/* SR PHY PLL0 registers */
+#define SR_PLL0_ACTRL6_MAGIC                   0xa
+
+/* SR PHY PLL1 registers */
+#define SR_PLL1_ACTRL2_MAGIC                   0x32
+#define SR_PLL1_ACTRL3_MAGIC                   0x2
+#define SR_PLL1_ACTRL4_MAGIC                   0x3e8
+
+static int brcm_sr_sata_init(struct brcm_sata_port *port)
+{
+       struct brcm_sata_phy *priv = port->phy_priv;
+       struct device *dev = port->phy_priv->dev;
+       void __iomem *base = priv->phy_base;
+       unsigned int val, try;
+
+       /* Configure PHY PLL register bank 1 */
+       val = SR_PLL1_ACTRL2_MAGIC;
+       brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+       val = SR_PLL1_ACTRL3_MAGIC;
+       brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+       val = SR_PLL1_ACTRL4_MAGIC;
+       brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+
+       /* Configure PHY PLL register bank 0 */
+       val = SR_PLL0_ACTRL6_MAGIC;
+       brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val);
+
+       /* Wait for PHY PLL lock by polling pll_lock bit */
+       try = 50;
+       do {
+               val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+                                       BLOCK0_XGXSSTATUS);
+               if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
+                       break;
+               msleep(20);
+               try--;
+       } while (try);
+
+       if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) {
+               /* PLL did not lock; give up */
+               dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+               return -ETIMEDOUT;
+       }
+
+       /* Invert Tx polarity */
+       brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL0,
+                        ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP);
+
+       /* Configure OOB control to handle 100MHz reference clock */
+       val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) |
+               (0x4 << OOB_CTRL1_BURST_MIN_SHIFT) |
+               (0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) |
+               (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT));
+       brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+       val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) |
+               (0x2 << OOB_CTRL2_BURST_CNT_SHIFT) |
+               (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT));
+       brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+
+       return 0;
+}
+
 static int brcm_sata_phy_init(struct phy *phy)
 {
        int rc;
@@ -363,6 +431,9 @@ static int brcm_sata_phy_init(struct phy *phy)
        case BRCM_SATA_PHY_IPROC_NSP:
                rc = brcm_nsp_sata_init(port);
                break;
+       case BRCM_SATA_PHY_IPROC_SR:
+               rc = brcm_sr_sata_init(port);
+               break;
        default:
                rc = -ENODEV;
        }
@@ -384,6 +455,8 @@ static const struct of_device_id brcm_sata_phy_of_match[] = {
          .data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
        { .compatible = "brcm,iproc-nsp-sata-phy",
          .data = (void *)BRCM_SATA_PHY_IPROC_NSP },
+       { .compatible   = "brcm,iproc-sr-sata-phy",
+         .data = (void *)BRCM_SATA_PHY_IPROC_SR },
        {},
 };
 MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);