# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o
-
-# PM support
-
-obj-$(CONFIG_PM) += pm.o
+++ /dev/null
-/* linux/arch/arm/plat-s3c/pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2004-2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C common power management (suspend to ram) support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-irq.h>
-#include <asm/irq.h>
-
-#include <plat/pm.h>
-#include <mach/pm-core.h>
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-/* Debug code:
- *
- * This code supports debug output to the low level UARTs for use on
- * resume before the console layer is available.
-*/
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-extern void printascii(const char *);
-
-void s3c_pm_dbg(const char *fmt, ...)
-{
- va_list va;
- char buff[256];
-
- va_start(va, fmt);
- vsprintf(buff, fmt, va);
- va_end(va);
-
- printascii(buff);
-}
-
-static inline void s3c_pm_debug_init(void)
-{
- /* restart uart clocks so we can use them to output */
- s3c_pm_debug_init_uart();
-}
-
-#else
-#define s3c_pm_debug_init() do { } while(0)
-
-#endif /* CONFIG_SAMSUNG_PM_DEBUG */
-
-/* Save the UART configurations if we are configured for debug. */
-
-unsigned char pm_uart_udivslot;
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
-{
- void __iomem *regs = S3C_VA_UARTx(uart);
-
- save->ulcon = __raw_readl(regs + S3C2410_ULCON);
- save->ucon = __raw_readl(regs + S3C2410_UCON);
- save->ufcon = __raw_readl(regs + S3C2410_UFCON);
- save->umcon = __raw_readl(regs + S3C2410_UMCON);
- save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
-
- if (pm_uart_udivslot)
- save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
-
- S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
- uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
-}
-
-static void s3c_pm_save_uarts(void)
-{
- struct pm_uart_save *save = uart_save;
- unsigned int uart;
-
- for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
- s3c_pm_save_uart(uart, save);
-}
-
-static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
-{
- void __iomem *regs = S3C_VA_UARTx(uart);
-
- s3c_pm_arch_update_uart(regs, save);
-
- __raw_writel(save->ulcon, regs + S3C2410_ULCON);
- __raw_writel(save->ucon, regs + S3C2410_UCON);
- __raw_writel(save->ufcon, regs + S3C2410_UFCON);
- __raw_writel(save->umcon, regs + S3C2410_UMCON);
- __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
-
- if (pm_uart_udivslot)
- __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
-}
-
-static void s3c_pm_restore_uarts(void)
-{
- struct pm_uart_save *save = uart_save;
- unsigned int uart;
-
- for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
- s3c_pm_restore_uart(uart, save);
-}
-#else
-static void s3c_pm_save_uarts(void) { }
-static void s3c_pm_restore_uarts(void) { }
-#endif
-
-/* The IRQ ext-int code goes here, it is too small to currently bother
- * with its own file. */
-
-unsigned long s3c_irqwake_intmask = 0xffffffffL;
-unsigned long s3c_irqwake_eintmask = 0xffffffffL;
-
-int s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
- unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
-
- if (!(s3c_irqwake_eintallow & bit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_eintmask |= bit;
- else
- s3c_irqwake_eintmask &= ~bit;
-
- return 0;
-}
-
-/* helper functions to save and restore register state */
-
-/**
- * s3c_pm_do_save() - save a set of registers for restoration on resume.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Run through the list of registers given, saving their contents in the
- * array for later restoration when we wakeup.
- */
-void s3c_pm_do_save(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- ptr->val = __raw_readl(ptr->reg);
- S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
- }
-}
-
-/**
- * s3c_pm_do_restore() - restore register values from the save list.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Restore the register values saved from s3c_pm_do_save().
- *
- * Note, we do not use S3C_PMDBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c_pm_do_restore(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
- ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-
-/**
- * s3c_pm_do_restore_core() - early restore register values from save list.
- *
- * This is similar to s3c_pm_do_restore() except we try and minimise the
- * side effects of the function in case registers that hardware might need
- * to work has been restored.
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++)
- __raw_writel(ptr->val, ptr->reg);
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-static void s3c_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
-{
- int i;
-
- which &= ~mask;
-
- for (i = 0; i <= 31; i++) {
- if (which & (1L<<i)) {
- S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
- }
- }
-}
-
-
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c_pm_enter(suspend_state_t state)
-{
- static unsigned long regs_save[16];
-
- /* ensure the debug is initialised (if enabled) */
-
- s3c_pm_debug_init();
-
- S3C_PMDBG("%s(%d)\n", __func__, state);
-
- if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
- printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
- return -EINVAL;
- }
-
- /* check if we have anything to wake-up with... bad things seem
- * to happen if you suspend with no wakeup (system will often
- * require a full power-cycle)
- */
-
- if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
- !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
- printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
- printk(KERN_ERR "%s: Aborting sleep\n", __func__);
- return -EINVAL;
- }
-
- /* store the physical address of the register recovery block */
-
- s3c_sleep_save_phys = virt_to_phys(regs_save);
-
- S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
-
- /* save all necessary core registers not covered by the drivers */
-
- s3c_pm_save_gpios();
- s3c_pm_save_uarts();
- s3c_pm_save_core();
-
- /* set the irq configuration for wake */
-
- s3c_pm_configure_extint();
-
- S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
- s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
- s3c_pm_arch_prepare_irqs();
-
- /* call cpu specific preparation */
-
- pm_cpu_prep();
-
- /* flush cache back to ram */
-
- flush_cache_all();
-
- s3c_pm_check_store();
-
- /* send the cpu to sleep... */
-
- s3c_pm_arch_stop_clocks();
-
- /* s3c_cpu_save will also act as our return point from when
- * we resume as it saves its own register state and restores it
- * during the resume. */
-
- s3c_cpu_save(regs_save);
-
- /* restore the cpu state using the kernel's cpu init code. */
-
- cpu_init();
-
- /* restore the system state */
-
- s3c_pm_restore_core();
- s3c_pm_restore_uarts();
- s3c_pm_restore_gpios();
-
- s3c_pm_debug_init();
-
- /* check what irq (if any) restored the system */
-
- s3c_pm_arch_show_resume_irqs();
-
- S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
-
- /* LEDs should now be 1110 */
- s3c_pm_debug_smdkled(1 << 1, 0);
-
- s3c_pm_check_restore();
-
- /* ok, let's return from sleep */
-
- S3C_PMDBG("S3C PM Resume (post-restore)\n");
- return 0;
-}
-
-/* callback from assembly code */
-void s3c_pm_cb_flushcache(void)
-{
- flush_cache_all();
-}
-
-static int s3c_pm_prepare(void)
-{
- /* prepare check area if configured */
-
- s3c_pm_check_prepare();
- return 0;
-}
-
-static void s3c_pm_finish(void)
-{
- s3c_pm_check_cleanup();
-}
-
-static struct platform_suspend_ops s3c_pm_ops = {
- .enter = s3c_pm_enter,
- .prepare = s3c_pm_prepare,
- .finish = s3c_pm_finish,
- .valid = suspend_valid_only_mem,
-};
-
-/* s3c_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c_pm_init(void)
-{
- printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
-
- suspend_set_ops(&s3c_pm_ops);
- return 0;
-}
# PM support
+obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
--- /dev/null
+/* linux/arch/arm/plat-s3c/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2004-2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C common power management (suspend to ram) support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-irq.h>
+#include <asm/irq.h>
+
+#include <plat/pm.h>
+#include <mach/pm-core.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+/* Debug code:
+ *
+ * This code supports debug output to the low level UARTs for use on
+ * resume before the console layer is available.
+*/
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+extern void printascii(const char *);
+
+void s3c_pm_dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vsprintf(buff, fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+static inline void s3c_pm_debug_init(void)
+{
+ /* restart uart clocks so we can use them to output */
+ s3c_pm_debug_init_uart();
+}
+
+#else
+#define s3c_pm_debug_init() do { } while(0)
+
+#endif /* CONFIG_SAMSUNG_PM_DEBUG */
+
+/* Save the UART configurations if we are configured for debug. */
+
+unsigned char pm_uart_udivslot;
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+
+struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
+{
+ void __iomem *regs = S3C_VA_UARTx(uart);
+
+ save->ulcon = __raw_readl(regs + S3C2410_ULCON);
+ save->ucon = __raw_readl(regs + S3C2410_UCON);
+ save->ufcon = __raw_readl(regs + S3C2410_UFCON);
+ save->umcon = __raw_readl(regs + S3C2410_UMCON);
+ save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+ if (pm_uart_udivslot)
+ save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+ S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+ uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
+}
+
+static void s3c_pm_save_uarts(void)
+{
+ struct pm_uart_save *save = uart_save;
+ unsigned int uart;
+
+ for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+ s3c_pm_save_uart(uart, save);
+}
+
+static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
+{
+ void __iomem *regs = S3C_VA_UARTx(uart);
+
+ s3c_pm_arch_update_uart(regs, save);
+
+ __raw_writel(save->ulcon, regs + S3C2410_ULCON);
+ __raw_writel(save->ucon, regs + S3C2410_UCON);
+ __raw_writel(save->ufcon, regs + S3C2410_UFCON);
+ __raw_writel(save->umcon, regs + S3C2410_UMCON);
+ __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+ if (pm_uart_udivslot)
+ __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
+}
+
+static void s3c_pm_restore_uarts(void)
+{
+ struct pm_uart_save *save = uart_save;
+ unsigned int uart;
+
+ for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
+ s3c_pm_restore_uart(uart, save);
+}
+#else
+static void s3c_pm_save_uarts(void) { }
+static void s3c_pm_restore_uarts(void) { }
+#endif
+
+/* The IRQ ext-int code goes here, it is too small to currently bother
+ * with its own file. */
+
+unsigned long s3c_irqwake_intmask = 0xffffffffL;
+unsigned long s3c_irqwake_eintmask = 0xffffffffL;
+
+int s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long bit = 1L << IRQ_EINT_BIT(irqno);
+
+ if (!(s3c_irqwake_eintallow & bit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_eintmask |= bit;
+ else
+ s3c_irqwake_eintmask &= ~bit;
+
+ return 0;
+}
+
+/* helper functions to save and restore register state */
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ ptr->val = __raw_readl(ptr->reg);
+ S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+ }
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * Note, we do not use S3C_PMDBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c_pm_do_restore(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+ ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+ __raw_writel(ptr->val, ptr->reg);
+ }
+}
+
+/**
+ * s3c_pm_do_restore_core() - early restore register values from save list.
+ *
+ * This is similar to s3c_pm_do_restore() except we try and minimise the
+ * side effects of the function in case registers that hardware might need
+ * to work has been restored.
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++)
+ __raw_writel(ptr->val, ptr->reg);
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+static void s3c_pm_show_resume_irqs(int start, unsigned long which,
+ unsigned long mask)
+{
+ int i;
+
+ which &= ~mask;
+
+ for (i = 0; i <= 31; i++) {
+ if (which & (1L<<i)) {
+ S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
+ }
+ }
+}
+
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c_pm_enter(suspend_state_t state)
+{
+ static unsigned long regs_save[16];
+
+ /* ensure the debug is initialised (if enabled) */
+
+ s3c_pm_debug_init();
+
+ S3C_PMDBG("%s(%d)\n", __func__, state);
+
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
+ return -EINVAL;
+ }
+
+ /* check if we have anything to wake-up with... bad things seem
+ * to happen if you suspend with no wakeup (system will often
+ * require a full power-cycle)
+ */
+
+ if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+ !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+ printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
+ printk(KERN_ERR "%s: Aborting sleep\n", __func__);
+ return -EINVAL;
+ }
+
+ /* store the physical address of the register recovery block */
+
+ s3c_sleep_save_phys = virt_to_phys(regs_save);
+
+ S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
+
+ /* save all necessary core registers not covered by the drivers */
+
+ s3c_pm_save_gpios();
+ s3c_pm_save_uarts();
+ s3c_pm_save_core();
+
+ /* set the irq configuration for wake */
+
+ s3c_pm_configure_extint();
+
+ S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+ s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+ s3c_pm_arch_prepare_irqs();
+
+ /* call cpu specific preparation */
+
+ pm_cpu_prep();
+
+ /* flush cache back to ram */
+
+ flush_cache_all();
+
+ s3c_pm_check_store();
+
+ /* send the cpu to sleep... */
+
+ s3c_pm_arch_stop_clocks();
+
+ /* s3c_cpu_save will also act as our return point from when
+ * we resume as it saves its own register state and restores it
+ * during the resume. */
+
+ s3c_cpu_save(regs_save);
+
+ /* restore the cpu state using the kernel's cpu init code. */
+
+ cpu_init();
+
+ /* restore the system state */
+
+ s3c_pm_restore_core();
+ s3c_pm_restore_uarts();
+ s3c_pm_restore_gpios();
+
+ s3c_pm_debug_init();
+
+ /* check what irq (if any) restored the system */
+
+ s3c_pm_arch_show_resume_irqs();
+
+ S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+
+ /* LEDs should now be 1110 */
+ s3c_pm_debug_smdkled(1 << 1, 0);
+
+ s3c_pm_check_restore();
+
+ /* ok, let's return from sleep */
+
+ S3C_PMDBG("S3C PM Resume (post-restore)\n");
+ return 0;
+}
+
+/* callback from assembly code */
+void s3c_pm_cb_flushcache(void)
+{
+ flush_cache_all();
+}
+
+static int s3c_pm_prepare(void)
+{
+ /* prepare check area if configured */
+
+ s3c_pm_check_prepare();
+ return 0;
+}
+
+static void s3c_pm_finish(void)
+{
+ s3c_pm_check_cleanup();
+}
+
+static struct platform_suspend_ops s3c_pm_ops = {
+ .enter = s3c_pm_enter,
+ .prepare = s3c_pm_prepare,
+ .finish = s3c_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+/* s3c_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c_pm_init(void)
+{
+ printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
+
+ suspend_set_ops(&s3c_pm_ops);
+ return 0;
+}
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff