* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
*
* (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
* Upgrade to full working driver
*
* (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
+ * switched from using spinlock to a semaphore, which fixes lots of
+ * problems.
*
* (04/08/2001) gb
* Identify version on module load.
- *
+ *
* 2001_Mar_19 gkh
- * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
+ * Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
* than once, and the got the proper usb_device_id table entries so
* the driver works again.
*
* (11/01/2000) Adam J. Richter
* usb_device_id table support
- *
+ *
* (10/05/2000) gkh
* Fixed bug with urb->dev not being set properly, now that the usb
* core needs it.
- *
+ *
* (10/03/2000) smd
* firmware is improved to guard against crap sent to device
* firmware now replies CMD_FAILURE on bad things
* Fixed bug with port->minor that was found by Al Borchers
*
* (07/04/2000) gkh
- * Added support for port settings. Baud rate can now be changed. Line signals
- * are not transferred to and from the tty layer yet, but things seem to be
- * working well now.
+ * Added support for port settings. Baud rate can now be changed. Line
+ * signals are not transferred to and from the tty layer yet, but things
+ * seem to be working well now.
*
* (05/04/2000) gkh
* First cut at open and close commands. Data can flow through the ports at
*
* (03/26/2000) gkh
* Split driver up into device specific pieces.
- *
+ *
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/termbits.h>
#include <linux/usb.h>
#include <linux/serial_reg.h>
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, id_table_combined);
+MODULE_DEVICE_TABLE(usb, id_table_combined);
static struct usb_driver whiteheat_driver = {
.name = "whiteheat",
};
/* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
-static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id);
-static int whiteheat_firmware_attach (struct usb_serial *serial);
+static int whiteheat_firmware_download(struct usb_serial *serial,
+ const struct usb_device_id *id);
+static int whiteheat_firmware_attach(struct usb_serial *serial);
/* function prototypes for the Connect Tech WhiteHEAT serial converter */
-static int whiteheat_attach (struct usb_serial *serial);
-static void whiteheat_shutdown (struct usb_serial *serial);
-static int whiteheat_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int whiteheat_write (struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
-static int whiteheat_write_room (struct tty_struct *tty);
-static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
-static void whiteheat_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
-static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file);
-static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
-static void whiteheat_break_ctl (struct tty_struct *tty, int break_state);
-static int whiteheat_chars_in_buffer (struct tty_struct *tty);
-static void whiteheat_throttle (struct tty_struct *tty);
-static void whiteheat_unthrottle (struct tty_struct *tty);
-static void whiteheat_read_callback (struct urb *urb);
-static void whiteheat_write_callback (struct urb *urb);
+static int whiteheat_attach(struct usb_serial *serial);
+static void whiteheat_shutdown(struct usb_serial *serial);
+static int whiteheat_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp);
+static int whiteheat_write(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+static int whiteheat_write_room(struct tty_struct *tty);
+static int whiteheat_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void whiteheat_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old);
+static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file);
+static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear);
+static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
+static int whiteheat_chars_in_buffer(struct tty_struct *tty);
+static void whiteheat_throttle(struct tty_struct *tty);
+static void whiteheat_unthrottle(struct tty_struct *tty);
+static void whiteheat_read_callback(struct urb *urb);
+static void whiteheat_write_callback(struct urb *urb);
static struct usb_serial_driver whiteheat_fake_device = {
.driver = {
struct mutex mutex;
__u8 port_running;
__u8 command_finished;
- wait_queue_head_t wait_command; /* for handling sleeping while waiting for a command to finish */
+ wait_queue_head_t wait_command; /* for handling sleeping whilst
+ waiting for a command to
+ finish */
__u8 result_buffer[64];
};
static void command_port_read_callback(struct urb *urb);
static int start_port_read(struct usb_serial_port *port);
-static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb, struct list_head *head);
+static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
+ struct list_head *head);
static struct list_head *list_first(struct list_head *head);
static void rx_data_softint(struct work_struct *work);
-static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
+static int firm_send_command(struct usb_serial_port *port, __u8 command,
+ __u8 *data, __u8 datasize);
static int firm_open(struct usb_serial_port *port);
static int firm_close(struct usb_serial_port *port);
static int firm_setup_port(struct tty_struct *tty);
- device renumerated itself and comes up as new device id with all
firmware download completed.
*/
-static int whiteheat_firmware_download (struct usb_serial *serial, const struct usb_device_id *id)
+static int whiteheat_firmware_download(struct usb_serial *serial,
+ const struct usb_device_id *id)
{
int response, ret = -ENOENT;
const struct firmware *loader_fw = NULL, *firmware_fw = NULL;
record = ihex_next_binrec(record);
}
- response = ezusb_set_reset (serial, 0);
+ response = ezusb_set_reset(serial, 0);
record = (const struct ihex_binrec *)firmware_fw->data;
while (record && be32_to_cpu(record->addr) < 0x1b40)
}
++record;
}
-
- response = ezusb_set_reset (serial, 1);
+
+ response = ezusb_set_reset(serial, 1);
record = (const struct ihex_binrec *)firmware_fw->data;
while (record && be32_to_cpu(record->addr) < 0x1b40) {
}
-static int whiteheat_firmware_attach (struct usb_serial *serial)
+static int whiteheat_firmware_attach(struct usb_serial *serial)
{
/* We want this device to fail to have a driver assigned to it */
return 1;
/*****************************************************************************
* Connect Tech's White Heat serial driver functions
*****************************************************************************/
-static int whiteheat_attach (struct usb_serial *serial)
+static int whiteheat_attach(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
struct whiteheat_command_private *command_info;
command_port = serial->port[COMMAND_PORT];
- pipe = usb_sndbulkpipe (serial->dev, command_port->bulk_out_endpointAddress);
+ pipe = usb_sndbulkpipe(serial->dev,
+ command_port->bulk_out_endpointAddress);
command = kmalloc(2, GFP_KERNEL);
if (!command)
goto no_command_buffer;
command[0] = WHITEHEAT_GET_HW_INFO;
command[1] = 0;
-
+
result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
if (!result)
goto no_result_buffer;
/*
* When the module is reloaded the firmware is still there and
* the endpoints are still in the usb core unchanged. This is the
- * unlinking bug in disguise. Same for the call below.
- */
+ * unlinking bug in disguise. Same for the call below.
+ */
usb_clear_halt(serial->dev, pipe);
- ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
+ ret = usb_bulk_msg(serial->dev, pipe, command, 2,
+ &alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't send command [%d]", serial->type->description, ret);
+ err("%s: Couldn't send command [%d]",
+ serial->type->description, ret);
goto no_firmware;
} else if (alen != 2) {
- err("%s: Send command incomplete [%d]", serial->type->description, alen);
+ err("%s: Send command incomplete [%d]",
+ serial->type->description, alen);
goto no_firmware;
}
- pipe = usb_rcvbulkpipe (serial->dev, command_port->bulk_in_endpointAddress);
+ pipe = usb_rcvbulkpipe(serial->dev,
+ command_port->bulk_in_endpointAddress);
/* See the comment on the usb_clear_halt() above */
usb_clear_halt(serial->dev, pipe);
- ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
+ ret = usb_bulk_msg(serial->dev, pipe, result,
+ sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't get results [%d]", serial->type->description, ret);
+ err("%s: Couldn't get results [%d]",
+ serial->type->description, ret);
goto no_firmware;
} else if (alen != sizeof(*hw_info) + 1) {
- err("%s: Get results incomplete [%d]", serial->type->description, alen);
+ err("%s: Get results incomplete [%d]",
+ serial->type->description, alen);
goto no_firmware;
} else if (result[0] != command[0]) {
- err("%s: Command failed [%d]", serial->type->description, result[0]);
+ err("%s: Command failed [%d]",
+ serial->type->description, result[0]);
goto no_firmware;
}
info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
if (info == NULL) {
- err("%s: Out of memory for port structures\n", serial->type->description);
+ err("%s: Out of memory for port structures\n",
+ serial->type->description);
goto no_private;
}
usb_set_serial_port_data(port, info);
}
- command_info = kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
+ command_info = kmalloc(sizeof(struct whiteheat_command_private),
+ GFP_KERNEL);
if (command_info == NULL) {
- err("%s: Out of memory for port structures\n", serial->type->description);
+ err("%s: Out of memory for port structures\n",
+ serial->type->description);
goto no_command_private;
}
no_firmware:
/* Firmware likely not running */
- err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
- err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
- err("%s: please contact support@connecttech.com\n", serial->type->description);
+ err("%s: Unable to retrieve firmware version, try replugging\n",
+ serial->type->description);
+ err("%s: If the firmware is not running (status led not blinking)\n",
+ serial->type->description);
+ err("%s: please contact support@connecttech.com\n",
+ serial->type->description);
kfree(result);
return -ENODEV;
}
-static void whiteheat_shutdown (struct usb_serial *serial)
+static void whiteheat_shutdown(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
struct usb_serial_port *port;
/* free up our private data for our command port */
command_port = serial->port[COMMAND_PORT];
- kfree (usb_get_serial_port_data(command_port));
+ kfree(usb_get_serial_port_data(command_port));
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
return;
}
-
-static int whiteheat_open (struct tty_struct *tty,
+static int whiteheat_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
int retval = 0;
/* Start reading from the device */
retval = start_port_read(port);
if (retval) {
- err("%s - failed submitting read urb, error %d", __func__, retval);
+ err("%s - failed submitting read urb, error %d",
+ __func__, retval);
firm_close(port);
stop_command_port(port->serial);
goto exit;
static void whiteheat_close(struct tty_struct *tty,
- struct usb_serial_port *port, struct file * filp)
+ struct usb_serial_port *port, struct file *filp)
{
struct whiteheat_private *info = usb_get_serial_port_data(port);
struct whiteheat_urb_wrap *wrap;
wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
urb = wrap->urb;
- bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count;
- memcpy (urb->transfer_buffer, buf + sent, bytes);
+ bytes = (count > port->bulk_out_size) ?
+ port->bulk_out_size : count;
+ memcpy(urb->transfer_buffer, buf + sent, bytes);
- usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev,
+ __func__, bytes, urb->transfer_buffer);
urb->dev = serial->dev;
urb->transfer_buffer_length = bytes;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __func__, result);
+ err("%s - failed submitting write urb, error %d",
+ __func__, result);
sent = result;
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->tx_urbs_free);
return sent;
}
-
static int whiteheat_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
-
+
spin_lock_irqsave(&info->lock, flags);
list_for_each(tmp, &info->tx_urbs_free)
room++;
return (room);
}
-
-static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file)
+static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_private *info = usb_get_serial_port_data(port);
return modem_signals;
}
-
-static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file,
+static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
}
-static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int whiteheat_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
struct serial_struct serstruct;
dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
switch (cmd) {
- case TIOCGSERIAL:
- memset(&serstruct, 0, sizeof(serstruct));
- serstruct.type = PORT_16654;
- serstruct.line = port->serial->minor;
- serstruct.port = port->number;
- serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
- serstruct.xmit_fifo_size = port->bulk_out_size;
- serstruct.custom_divisor = 0;
- serstruct.baud_base = 460800;
- serstruct.close_delay = CLOSING_DELAY;
- serstruct.closing_wait = CLOSING_DELAY;
-
- if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
- return -EFAULT;
-
- break;
-
- case TIOCSSERIAL:
- if (copy_from_user(&serstruct, user_arg, sizeof(serstruct)))
- return -EFAULT;
-
- /*
- * For now this is ignored. dip sets the ASYNC_[V]HI flags
- * but this isn't used by us at all. Maybe someone somewhere
- * will need the custom_divisor setting.
- */
-
- break;
-
- default:
- break;
+ case TIOCGSERIAL:
+ memset(&serstruct, 0, sizeof(serstruct));
+ serstruct.type = PORT_16654;
+ serstruct.line = port->serial->minor;
+ serstruct.port = port->number;
+ serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+ serstruct.xmit_fifo_size = port->bulk_out_size;
+ serstruct.custom_divisor = 0;
+ serstruct.baud_base = 460800;
+ serstruct.close_delay = CLOSING_DELAY;
+ serstruct.closing_wait = CLOSING_DELAY;
+
+ if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
+ return -EFAULT;
+ break;
+ default:
+ break;
}
return -ENOIOCTLCMD;
}
-static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios)
+static void whiteheat_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
+ /* FIXME */
firm_setup_port(tty);
}
-
-static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) {
+static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
+{
struct usb_serial_port *port = tty->driver_data;
firm_set_break(port, break_state);
}
}
spin_unlock_irqrestore(&info->lock, flags);
- dbg ("%s - returns %d", __func__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
-static void whiteheat_throttle (struct tty_struct *tty)
+static void whiteheat_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_private *info = usb_get_serial_port_data(port);
}
-static void whiteheat_unthrottle (struct tty_struct *tty)
+static void whiteheat_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_private *info = usb_get_serial_port_data(port);
command_info = usb_get_serial_port_data(command_port);
if (!command_info) {
- dbg ("%s - command_info is NULL, exiting.", __func__);
+ dbg("%s - command_info is NULL, exiting.", __func__);
return;
}
if (status) {
return;
}
- usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &command_port->dev,
+ __func__, urb->actual_length, data);
if (data[0] == WHITEHEAT_CMD_COMPLETE) {
command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
command_info->command_finished = WHITEHEAT_CMD_FAILURE;
wake_up(&command_info->wait_command);
} else if (data[0] == WHITEHEAT_EVENT) {
- /* These are unsolicited reports from the firmware, hence no waiting command to wakeup */
+ /* These are unsolicited reports from the firmware, hence no
+ waiting command to wakeup */
dbg("%s - event received", __func__);
} else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
- memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1);
+ memcpy(command_info->result_buffer, &data[1],
+ urb->actual_length - 1);
command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
wake_up(&command_info->wait_command);
- } else {
+ } else
dbg("%s - bad reply from firmware", __func__);
- }
-
+
/* Continue trying to always read */
command_port->read_urb->dev = command_port->serial->dev;
result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
if (result)
- dbg("%s - failed resubmitting read urb, error %d", __func__, result);
+ dbg("%s - failed resubmitting read urb, error %d",
+ __func__, result);
}
return;
}
- usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev,
+ __func__, urb->actual_length, data);
spin_lock(&info->lock);
list_add_tail(&wrap->list, &info->rx_urb_q);
/*****************************************************************************
* Connect Tech's White Heat firmware interface
*****************************************************************************/
-static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize)
+static int firm_send_command(struct usb_serial_port *port, __u8 command,
+ __u8 *data, __u8 datasize)
{
struct usb_serial_port *command_port;
struct whiteheat_command_private *command_info;
command_info = usb_get_serial_port_data(command_port);
mutex_lock(&command_info->mutex);
command_info->command_finished = false;
-
+
transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
transfer_buffer[0] = command;
- memcpy (&transfer_buffer[1], data, datasize);
+ memcpy(&transfer_buffer[1], data, datasize);
command_port->write_urb->transfer_buffer_length = datasize + 1;
command_port->write_urb->dev = port->serial->dev;
- retval = usb_submit_urb (command_port->write_urb, GFP_NOIO);
+ retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
if (retval) {
dbg("%s - submit urb failed", __func__);
goto exit;
if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
dbg("%s - command completed.", __func__);
switch (command) {
- case WHITEHEAT_GET_DTR_RTS:
- info = usb_get_serial_port_data(port);
- memcpy(&info->mcr, command_info->result_buffer, sizeof(struct whiteheat_dr_info));
+ case WHITEHEAT_GET_DTR_RTS:
+ info = usb_get_serial_port_data(port);
+ memcpy(&info->mcr, command_info->result_buffer,
+ sizeof(struct whiteheat_dr_info));
break;
}
}
-
exit:
mutex_unlock(&command_info->mutex);
return retval;
}
-static int firm_open(struct usb_serial_port *port) {
+static int firm_open(struct usb_serial_port *port)
+{
struct whiteheat_simple open_command;
open_command.port = port->number - port->serial->minor + 1;
- return firm_send_command(port, WHITEHEAT_OPEN, (__u8 *)&open_command, sizeof(open_command));
+ return firm_send_command(port, WHITEHEAT_OPEN,
+ (__u8 *)&open_command, sizeof(open_command));
}
-static int firm_close(struct usb_serial_port *port) {
+static int firm_close(struct usb_serial_port *port)
+{
struct whiteheat_simple close_command;
close_command.port = port->number - port->serial->minor + 1;
- return firm_send_command(port, WHITEHEAT_CLOSE, (__u8 *)&close_command, sizeof(close_command));
+ return firm_send_command(port, WHITEHEAT_CLOSE,
+ (__u8 *)&close_command, sizeof(close_command));
}
-static int firm_setup_port(struct tty_struct *tty) {
+static int firm_setup_port(struct tty_struct *tty)
+{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_port_settings port_settings;
unsigned int cflag = tty->termios->c_cflag;
/* get the byte size */
switch (cflag & CSIZE) {
- case CS5: port_settings.bits = 5; break;
- case CS6: port_settings.bits = 6; break;
- case CS7: port_settings.bits = 7; break;
- default:
- case CS8: port_settings.bits = 8; break;
+ case CS5: port_settings.bits = 5; break;
+ case CS6: port_settings.bits = 6; break;
+ case CS7: port_settings.bits = 7; break;
+ default:
+ case CS8: port_settings.bits = 8; break;
}
dbg("%s - data bits = %d", __func__, port_settings.bits);
-
+
/* determine the parity */
if (cflag & PARENB)
if (cflag & CMSPAR)
/* figure out the flow control settings */
if (cflag & CRTSCTS)
- port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS);
+ port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
+ WHITEHEAT_HFLOW_RTS);
else
port_settings.hflow = WHITEHEAT_HFLOW_NONE;
dbg("%s - hardware flow control = %s %s %s %s", __func__,
(port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
(port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
(port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
-
+
/* determine software flow control */
if (I_IXOFF(tty))
port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
else
port_settings.sflow = WHITEHEAT_SFLOW_NONE;
dbg("%s - software flow control = %c", __func__, port_settings.sflow);
-
+
port_settings.xon = START_CHAR(tty);
port_settings.xoff = STOP_CHAR(tty);
- dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff);
+ dbg("%s - XON = %2x, XOFF = %2x",
+ __func__, port_settings.xon, port_settings.xoff);
/* get the baud rate wanted */
port_settings.baud = tty_get_baud_rate(tty);
tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
/* handle any settings that aren't specified in the tty structure */
port_settings.lloop = 0;
-
+
/* now send the message to the device */
- return firm_send_command(port, WHITEHEAT_SETUP_PORT, (__u8 *)&port_settings, sizeof(port_settings));
+ return firm_send_command(port, WHITEHEAT_SETUP_PORT,
+ (__u8 *)&port_settings, sizeof(port_settings));
}
-static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) {
+static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
+{
struct whiteheat_set_rdb rts_command;
rts_command.port = port->number - port->serial->minor + 1;
rts_command.state = onoff;
- return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&rts_command, sizeof(rts_command));
+ return firm_send_command(port, WHITEHEAT_SET_RTS,
+ (__u8 *)&rts_command, sizeof(rts_command));
}
-static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) {
+static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
+{
struct whiteheat_set_rdb dtr_command;
dtr_command.port = port->number - port->serial->minor + 1;
dtr_command.state = onoff;
- return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&dtr_command, sizeof(dtr_command));
+ return firm_send_command(port, WHITEHEAT_SET_RTS,
+ (__u8 *)&dtr_command, sizeof(dtr_command));
}
-static int firm_set_break(struct usb_serial_port *port, __u8 onoff) {
+static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
+{
struct whiteheat_set_rdb break_command;
break_command.port = port->number - port->serial->minor + 1;
break_command.state = onoff;
- return firm_send_command(port, WHITEHEAT_SET_RTS, (__u8 *)&break_command, sizeof(break_command));
+ return firm_send_command(port, WHITEHEAT_SET_RTS,
+ (__u8 *)&break_command, sizeof(break_command));
}
-static int firm_purge(struct usb_serial_port *port, __u8 rxtx) {
+static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
+{
struct whiteheat_purge purge_command;
purge_command.port = port->number - port->serial->minor + 1;
purge_command.what = rxtx;
- return firm_send_command(port, WHITEHEAT_PURGE, (__u8 *)&purge_command, sizeof(purge_command));
+ return firm_send_command(port, WHITEHEAT_PURGE,
+ (__u8 *)&purge_command, sizeof(purge_command));
}
-static int firm_get_dtr_rts(struct usb_serial_port *port) {
+static int firm_get_dtr_rts(struct usb_serial_port *port)
+{
struct whiteheat_simple get_dr_command;
get_dr_command.port = port->number - port->serial->minor + 1;
- return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, (__u8 *)&get_dr_command, sizeof(get_dr_command));
+ return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
+ (__u8 *)&get_dr_command, sizeof(get_dr_command));
}
-static int firm_report_tx_done(struct usb_serial_port *port) {
+static int firm_report_tx_done(struct usb_serial_port *port)
+{
struct whiteheat_simple close_command;
close_command.port = port->number - port->serial->minor + 1;
- return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, (__u8 *)&close_command, sizeof(close_command));
+ return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
+ (__u8 *)&close_command, sizeof(close_command));
}
struct usb_serial_port *command_port;
struct whiteheat_command_private *command_info;
int retval = 0;
-
+
command_port = serial->port[COMMAND_PORT];
command_info = usb_get_serial_port_data(command_port);
mutex_lock(&command_info->mutex);
command_port->read_urb->dev = serial->dev;
retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
if (retval) {
- err("%s - failed submitting read urb, error %d", __func__, retval);
+ err("%s - failed submitting read urb, error %d",
+ __func__, retval);
goto exit;
}
}
}
-static struct whiteheat_urb_wrap *urb_to_wrap(struct urb* urb, struct list_head *head)
+static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
+ struct list_head *head)
{
struct whiteheat_urb_wrap *wrap;
struct list_head *tmp;
urb = wrap->urb;
if (tty && urb->actual_length) {
- int len = tty_buffer_request_room(tty, urb->actual_length);
+ int len = tty_buffer_request_room(tty,
+ urb->actual_length);
/* This stuff can go away now I suspect */
if (unlikely(len < urb->actual_length)) {
spin_lock_irqsave(&info->lock, flags);
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed resubmitting read urb, error %d", __func__, result);
+ err("%s - failed resubmitting read urb, error %d",
+ __func__, result);
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->rx_urbs_free);
continue;
/*****************************************************************************
* Connect Tech's White Heat module functions
*****************************************************************************/
-static int __init whiteheat_init (void)
+static int __init whiteheat_init(void)
{
int retval;
retval = usb_serial_register(&whiteheat_fake_device);
}
-static void __exit whiteheat_exit (void)
+static void __exit whiteheat_exit(void)
{
- usb_deregister (&whiteheat_driver);
- usb_serial_deregister (&whiteheat_fake_device);
- usb_serial_deregister (&whiteheat_device);
+ usb_deregister(&whiteheat_driver);
+ usb_serial_deregister(&whiteheat_fake_device);
+ usb_serial_deregister(&whiteheat_device);
}
module_init(whiteheat_init);
module_exit(whiteheat_exit);
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("whiteheat.fw");
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff