ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stage

A 2M bytes SPI NOR flash(sst25vf016b) is soldered on the mx51_3ds
board.  So add the corresponding device for it.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index c9c41282c996b0d402d08a77238512fd22b03f86..b9d3331ba308f4fd03432c55012c46dd76de87b9 100644 (file)
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -145,6 +146,16 @@ static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
        .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs),
 };
 
+static struct spi_board_info mx51_3ds_spi_nor_device[] = {
+       {
+        .modalias = "m25p80",
+        .max_speed_hz = 25000000,      /* max spi clock (SCK) speed in HZ */
+        .bus_num = 1,
+        .chip_select = 1,
+        .mode = SPI_MODE_0,
+        .platform_data = NULL,},
+};
+
 /*
  * Board specific initialization.
  */
@@ -155,6 +166,8 @@ static void __init mxc_board_init(void)
        mxc_init_imx_uart();
 
        imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
+       spi_register_board_info(mx51_3ds_spi_nor_device,
+                               ARRAY_SIZE(mx51_3ds_spi_nor_device));
 
        if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
                printk(KERN_WARNING "Init of the debugboard failed, all "