MX1: Add ARMadeus Systems APF9328 board support

APF9328 is an i.MXL based SOM (System On Module) that can be plugged on
several docking/development boards. Here only basic module support
is added (Ethernet, Serial, NOR Flash).

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Nicolas Colombain <nicolas.colombain@armadeus.com>
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index b39b5ced8a104971164e95d8132b7d6a4780a9f8..c9436d0bf59347ef5d19946926dc20d632dd3229 100644 (file)
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -15,6 +15,7 @@ CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MX1=y
 CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 299580676dc8a86dd100cb76c466afc1f24a38b6..11235ef104362a02578db5bf500da2f6bb60c3e3 100644 (file)
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -52,6 +52,13 @@ config MACH_SCB9328
        help
          Say Y here if you are using a Synertronixx scb9328 board
 
+config MACH_APF9328
+       bool "APF9328"
+       select SOC_IMX1
+       select IMX_HAVE_PLATFORM_IMX_UART
+       help
+         Say Yes here if you are using the Armadeus APF9328 development board
+
 endif
 
 if ARCH_MX2

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index b85794d279911de8fcd1ad61e7f447bb76e8c412..270f5f9db92ea7c941df6bbd3d21fb760a9a1675 100644 (file)
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_MX1_VIDEO)       += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 
 obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
 
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 

diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
new file mode 100644 (file)
index 0000000..15e45c8
--- /dev/null
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -0,0 +1,144 @@
+/*
+ * linux/arch/arm/mach-imx/mach-apf9328.c
+ *
+ * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
+ *
+ * This work is based on mach-scb9328.c which is:
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/iomux-mx1.h>
+
+#include "devices-imx1.h"
+
+static const int apf9328_pins[] __initconst = {
+       /* UART1 */
+       PC9_PF_UART1_CTS,
+       PC10_PF_UART1_RTS,
+       PC11_PF_UART1_TXD,
+       PC12_PF_UART1_RXD,
+       /* UART2 */
+       PB28_PF_UART2_CTS,
+       PB29_PF_UART2_RTS,
+       PB30_PF_UART2_TXD,
+       PB31_PF_UART2_RXD,
+};
+
+/*
+ * The APF9328 can have up to 32MB NOR Flash
+ */
+static struct resource flash_resource = {
+       .start  = MX1_CS0_PHYS,
+       .end    = MX1_CS0_PHYS + SZ_32M - 1,
+       .flags  = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data apf9328_flash_data = {
+       .width  = 2,
+};
+
+static struct platform_device apf9328_flash_device = {
+       .name           = "physmap-flash",
+       .id             = 0,
+       .dev = {
+               .platform_data = &apf9328_flash_data,
+       },
+       .resource = &flash_resource,
+       .num_resources = 1,
+};
+
+/*
+ * APF9328 has a DM9000 Ethernet controller
+ */
+static struct dm9000_plat_data dm9000_setup = {
+       .flags          = DM9000_PLATF_16BITONLY
+};
+
+static struct resource dm9000_resources[] = {
+       {
+               .start  = MX1_CS4_PHYS + 0x00C00000,
+               .end    = MX1_CS4_PHYS + 0x00C00001,
+               .flags  = IORESOURCE_MEM,
+       }, {
+               .start  = MX1_CS4_PHYS + 0x00C00002,
+               .end    = MX1_CS4_PHYS + 0x00C00003,
+               .flags  = IORESOURCE_MEM,
+       }, {
+               .start  = IRQ_GPIOB(14),
+               .end    = IRQ_GPIOB(14),
+               .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+       },
+};
+
+static struct platform_device dm9000x_device = {
+       .name           = "dm9000",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(dm9000_resources),
+       .resource       = dm9000_resources,
+       .dev            = {
+               .platform_data = &dm9000_setup,
+       }
+};
+
+/* --- SERIAL RESSOURCE --- */
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+       .flags = 0,
+};
+
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+       .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+       &apf9328_flash_device,
+       &dm9000x_device,
+};
+
+static void __init apf9328_init(void)
+{
+       mxc_gpio_setup_multiple_pins(apf9328_pins,
+                       ARRAY_SIZE(apf9328_pins),
+                       "APF9328");
+
+       imx1_add_imx_uart0(&uart0_pdata);
+       imx1_add_imx_uart1(&uart1_pdata);
+
+       platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init apf9328_timer_init(void)
+{
+       mx1_clocks_init(32768);
+}
+
+static struct sys_timer apf9328_timer = {
+       .init   = apf9328_timer_init,
+};
+
+MACHINE_START(APF9328, "Armadeus APF9328")
+       /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
+       .map_io       = mx1_map_io,
+       .init_early   = imx1_init_early,
+       .init_irq     = mx1_init_irq,
+       .timer        = &apf9328_timer,
+       .init_machine = apf9328_init,
+MACHINE_END