Elminate some simple_strto* usage.
checkpatch also noted pr_ conversations, which have been done as
recommended. The pr_fmt() define is used to shorten line length.
Other multi-line string warnings are also elmininated.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
/*
- * Copyright (c) 2010 QLogic Corporation. All rights reserved.
- * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
#include "qib.h"
#include "qib_common.h"
+#undef pr_fmt
+#define pr_fmt(fmt) QIB_DRV_NAME ": " fmt
+
/*
* Each client that opens the diag device must read then write
* offset 0, to prevent lossage from random cat or od. diag_state
}
tmpbuf = vmalloc(plen);
if (!tmpbuf) {
- qib_devinfo(dd->pcidev, "Unable to allocate tmp buffer, "
- "failing\n");
+ qib_devinfo(dd->pcidev,
+ "Unable to allocate tmp buffer, failing\n");
ret = -ENOMEM;
goto bail;
}
ret = -ENOMEM;
olp = vmalloc(sizeof *olp);
if (!olp) {
- printk(KERN_ERR QIB_DRV_NAME ": vmalloc for observer failed\n");
+ pr_err("vmalloc for observer failed\n");
goto bail;
}
if (olp) {
qib_devinfo(dd->pcidev, "Reset on unit %u requested\n", unit);
if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) {
- qib_devinfo(dd->pcidev, "Invalid unit number %u or "
- "not initialized or not present\n", unit);
+ qib_devinfo(dd->pcidev,
+ "Invalid unit number %u or not initialized or not present\n",
+ unit);
ret = -ENXIO;
goto bail;
}
else
ret = -EAGAIN;
if (ret)
- qib_dev_err(dd, "Reinitialize unit %u after "
- "reset failed with %d\n", unit, ret);
+ qib_dev_err(dd,
+ "Reinitialize unit %u after reset failed with %d\n",
+ unit, ret);
else
- qib_devinfo(dd->pcidev, "Reinitialized unit %u after "
- "resetting\n", unit);
+ qib_devinfo(dd->pcidev,
+ "Reinitialized unit %u after resetting\n",
+ unit);
bail:
return ret;
/*
- * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
if (oguid > bguid[7]) {
if (bguid[6] == 0xff) {
if (bguid[5] == 0xff) {
- qib_dev_err(dd, "Can't set %s GUID"
- " from base, wraps to"
- " OUI!\n",
- qib_get_unit_name(t));
+ qib_dev_err(dd,
+ "Can't set %s GUID from base, wraps to OUI!\n",
+ qib_get_unit_name(t));
dd->base_guid = 0;
goto bail;
}
len = sizeof(struct qib_flash);
buf = vmalloc(len);
if (!buf) {
- qib_dev_err(dd, "Couldn't allocate memory to read %u "
- "bytes from eeprom for GUID\n", len);
+ qib_dev_err(dd,
+ "Couldn't allocate memory to read %u bytes from eeprom for GUID\n",
+ len);
goto bail;
}
csum = flash_csum(ifp, 0);
if (csum != ifp->if_csum) {
- qib_devinfo(dd->pcidev, "Bad I2C flash checksum: "
- "0x%x, not 0x%x\n", csum, ifp->if_csum);
+ qib_devinfo(dd->pcidev,
+ "Bad I2C flash checksum: 0x%x, not 0x%x\n",
+ csum, ifp->if_csum);
goto done;
}
if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
*(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
- qib_dev_err(dd, "Invalid GUID %llx from flash; ignoring\n",
- *(unsigned long long *) ifp->if_guid);
+ qib_dev_err(dd,
+ "Invalid GUID %llx from flash; ignoring\n",
+ *(unsigned long long *) ifp->if_guid);
/* don't allow GUID if all 0 or all 1's */
goto done;
}
/* complain, but allow it */
if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
- qib_devinfo(dd->pcidev, "Warning, GUID %llx is "
- "default, probably not correct!\n",
- *(unsigned long long *) ifp->if_guid);
+ qib_devinfo(dd->pcidev,
+ "Warning, GUID %llx is default, probably not correct!\n",
+ *(unsigned long long *) ifp->if_guid);
bguid = ifp->if_guid;
if (!bguid[0] && !bguid[1] && !bguid[2]) {
memcpy(dd->serial, ifp->if_serial,
sizeof ifp->if_serial);
if (!strstr(ifp->if_comment, "Tested successfully"))
- qib_dev_err(dd, "Board SN %s did not pass functional "
- "test: %s\n", dd->serial, ifp->if_comment);
+ qib_dev_err(dd,
+ "Board SN %s did not pass functional test: %s\n",
+ dd->serial, ifp->if_comment);
memcpy(&dd->eep_st_errs, &ifp->if_errcntp, QIB_EEP_LOG_CNT);
/*
buf = vmalloc(len);
ret = 1;
if (!buf) {
- qib_dev_err(dd, "Couldn't allocate memory to read %u "
- "bytes from eeprom for logging\n", len);
+ qib_dev_err(dd,
+ "Couldn't allocate memory to read %u bytes from eeprom for logging\n",
+ len);
goto bail;
}
/*
- * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
- * All rights reserved.
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
#include "qib_common.h"
#include "qib_user_sdma.h"
+#undef pr_fmt
+#define pr_fmt(fmt) QIB_DRV_NAME ": " fmt
+
static int qib_open(struct inode *, struct file *);
static int qib_close(struct inode *, struct file *);
static ssize_t qib_write(struct file *, const char __user *, size_t, loff_t *);
}
if (cnt > tidcnt) {
/* make sure it all fits in tid_pg_list */
- qib_devinfo(dd->pcidev, "Process tried to allocate %u "
- "TIDs, only trying max (%u)\n", cnt, tidcnt);
+ qib_devinfo(dd->pcidev,
+ "Process tried to allocate %u TIDs, only trying max (%u)\n",
+ cnt, tidcnt);
cnt = tidcnt;
}
pagep = (struct page **) rcd->tid_pg_list;
ret = remap_pfn_range(vma, vma->vm_start, pfn,
len, vma->vm_page_prot);
if (ret)
- qib_devinfo(dd->pcidev, "%s ctxt%u mmap of %lx, %x "
- "bytes failed: %d\n", what, rcd->ctxt,
- pfn, len, ret);
+ qib_devinfo(dd->pcidev,
+ "%s ctxt%u mmap of %lx, %x bytes failed: %d\n",
+ what, rcd->ctxt, pfn, len, ret);
bail:
return ret;
}
*/
sz = dd->flags & QIB_HAS_HDRSUPP ? 2 * PAGE_SIZE : PAGE_SIZE;
if ((vma->vm_end - vma->vm_start) > sz) {
- qib_devinfo(dd->pcidev, "FAIL mmap userreg: reqlen "
- "%lx > PAGE\n", vma->vm_end - vma->vm_start);
+ qib_devinfo(dd->pcidev,
+ "FAIL mmap userreg: reqlen %lx > PAGE\n",
+ vma->vm_end - vma->vm_start);
ret = -EFAULT;
} else {
phys = dd->physaddr + ureg;
* for it.
*/
if ((vma->vm_end - vma->vm_start) > (piocnt * dd->palign)) {
- qib_devinfo(dd->pcidev, "FAIL mmap piobufs: "
- "reqlen %lx > PAGE\n",
+ qib_devinfo(dd->pcidev,
+ "FAIL mmap piobufs: reqlen %lx > PAGE\n",
vma->vm_end - vma->vm_start);
ret = -EINVAL;
goto bail;
size = rcd->rcvegrbuf_size;
total_size = rcd->rcvegrbuf_chunks * size;
if ((vma->vm_end - vma->vm_start) > total_size) {
- qib_devinfo(dd->pcidev, "FAIL on egr bufs: "
- "reqlen %lx > actual %lx\n",
+ qib_devinfo(dd->pcidev,
+ "FAIL on egr bufs: reqlen %lx > actual %lx\n",
vma->vm_end - vma->vm_start,
(unsigned long) total_size);
ret = -EINVAL;
}
if (vma->vm_flags & VM_WRITE) {
- qib_devinfo(dd->pcidev, "Can't map eager buffers as "
- "writable (flags=%lx)\n", vma->vm_flags);
+ qib_devinfo(dd->pcidev,
+ "Can't map eager buffers as writable (flags=%lx)\n",
+ vma->vm_flags);
ret = -EPERM;
goto bail;
}
GFP_KERNEL);
if (!rcd || !ptmp) {
- qib_dev_err(dd, "Unable to allocate ctxtdata "
- "memory, failing open\n");
+ qib_dev_err(dd,
+ "Unable to allocate ctxtdata memory, failing open\n");
ret = -ENOMEM;
goto bailerr;
}
} else if (weight == 1 &&
test_bit(cpumask_first(tsk_cpus_allowed(current)),
qib_cpulist))
- qib_devinfo(dd->pcidev, "%s PID %u affinity "
- "set to cpu %d; already allocated\n",
- current->comm, current->pid,
- cpumask_first(tsk_cpus_allowed(current)));
+ qib_devinfo(dd->pcidev,
+ "%s PID %u affinity set to cpu %d; already allocated\n",
+ current->comm, current->pid,
+ cpumask_first(tsk_cpus_allowed(current)));
}
mutex_unlock(&qib_mutex);
cdev = cdev_alloc();
if (!cdev) {
- printk(KERN_ERR QIB_DRV_NAME
- ": Could not allocate cdev for minor %d, %s\n",
+ pr_err("Could not allocate cdev for minor %d, %s\n",
minor, name);
ret = -ENOMEM;
goto done;
ret = cdev_add(cdev, dev, 1);
if (ret < 0) {
- printk(KERN_ERR QIB_DRV_NAME
- ": Could not add cdev for minor %d, %s (err %d)\n",
+ pr_err("Could not add cdev for minor %d, %s (err %d)\n",
minor, name, -ret);
goto err_cdev;
}
goto done;
ret = PTR_ERR(device);
device = NULL;
- printk(KERN_ERR QIB_DRV_NAME ": Could not create "
- "device for minor %d, %s (err %d)\n",
+ pr_err("Could not create device for minor %d, %s (err %d)\n",
minor, name, -ret);
err_cdev:
cdev_del(cdev);
ret = alloc_chrdev_region(&qib_dev, 0, QIB_NMINORS, QIB_DRV_NAME);
if (ret < 0) {
- printk(KERN_ERR QIB_DRV_NAME ": Could not allocate "
- "chrdev region (err %d)\n", -ret);
+ pr_err("Could not allocate chrdev region (err %d)\n", -ret);
goto done;
}
qib_class = class_create(THIS_MODULE, "ipath");
if (IS_ERR(qib_class)) {
ret = PTR_ERR(qib_class);
- printk(KERN_ERR QIB_DRV_NAME ": Could not create "
- "device class (err %d)\n", -ret);
+ pr_err("Could not create device class (err %d)\n", -ret);
unregister_chrdev_region(qib_dev, QIB_NMINORS);
}
/*
- * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
ret = create_file(unit, S_IFDIR|S_IRUGO|S_IXUGO, sb->s_root, &dir,
&simple_dir_operations, dd);
if (ret) {
- printk(KERN_ERR "create_file(%s) failed: %d\n", unit, ret);
+ pr_err("create_file(%s) failed: %d\n", unit, ret);
goto bail;
}
ret = create_file("counters", S_IFREG|S_IRUGO, dir, &tmp,
&cntr_ops[0], dd);
if (ret) {
- printk(KERN_ERR "create_file(%s/counters) failed: %d\n",
+ pr_err("create_file(%s/counters) failed: %d\n",
unit, ret);
goto bail;
}
ret = create_file("counter_names", S_IFREG|S_IRUGO, dir, &tmp,
&cntr_ops[1], dd);
if (ret) {
- printk(KERN_ERR "create_file(%s/counter_names) failed: %d\n",
+ pr_err("create_file(%s/counter_names) failed: %d\n",
unit, ret);
goto bail;
}
ret = create_file("portcounter_names", S_IFREG|S_IRUGO, dir, &tmp,
&portcntr_ops[0], dd);
if (ret) {
- printk(KERN_ERR "create_file(%s/%s) failed: %d\n",
+ pr_err("create_file(%s/%s) failed: %d\n",
unit, "portcounter_names", ret);
goto bail;
}
ret = create_file(fname, S_IFREG|S_IRUGO, dir, &tmp,
&portcntr_ops[i], dd);
if (ret) {
- printk(KERN_ERR "create_file(%s/%s) failed: %d\n",
+ pr_err("create_file(%s/%s) failed: %d\n",
unit, fname, ret);
goto bail;
}
ret = create_file(fname, S_IFREG|S_IRUGO, dir, &tmp,
&qsfp_ops[i - 1], dd);
if (ret) {
- printk(KERN_ERR "create_file(%s/%s) failed: %d\n",
+ pr_err("create_file(%s/%s) failed: %d\n",
unit, fname, ret);
goto bail;
}
ret = create_file("flash", S_IFREG|S_IWUSR|S_IRUGO, dir, &tmp,
&flash_ops, dd);
if (ret)
- printk(KERN_ERR "create_file(%s/flash) failed: %d\n",
+ pr_err("create_file(%s/flash) failed: %d\n",
unit, ret);
bail:
return ret;
if (IS_ERR(dir)) {
ret = PTR_ERR(dir);
- printk(KERN_ERR "Lookup of %s failed\n", unit);
+ pr_err("Lookup of %s failed\n", unit);
goto bail;
}
ret = simple_fill_super(sb, QIBFS_MAGIC, files);
if (ret) {
- printk(KERN_ERR "simple_fill_super failed: %d\n", ret);
+ pr_err("simple_fill_super failed: %d\n", ret);
goto bail;
}
if (!hwerrs)
return;
if (hwerrs == ~0ULL) {
- qib_dev_err(dd, "Read of hardware error status failed "
- "(all bits set); ignoring\n");
+ qib_dev_err(dd,
+ "Read of hardware error status failed (all bits set); ignoring\n");
return;
}
qib_stats.sps_hwerrs++;
* or it's occurred within the last 5 seconds.
*/
if (hwerrs & ~(TXE_PIO_PARITY | RXEMEMPARITYERR_EAGERTID))
- qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx "
- "(cleared)\n", (unsigned long long) hwerrs);
+ qib_devinfo(dd->pcidev,
+ "Hardware error: hwerr=0x%llx (cleared)\n",
+ (unsigned long long) hwerrs);
if (hwerrs & ~IB_HWE_BITSEXTANT)
- qib_dev_err(dd, "hwerror interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (hwerrs & ~IB_HWE_BITSEXTANT));
+ qib_dev_err(dd,
+ "hwerror interrupt with unknown errors %llx set\n",
+ (unsigned long long)(hwerrs & ~IB_HWE_BITSEXTANT));
ctrl = qib_read_kreg32(dd, kr_control);
if ((ctrl & QLOGIC_IB_C_FREEZEMODE) && !dd->diag_client) {
if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
isfatal = 1;
- strlcat(msg, "[Memory BIST test failed, InfiniPath hardware"
- " unusable]", msgl);
+ strlcat(msg,
+ "[Memory BIST test failed, InfiniPath hardware unusable]",
+ msgl);
/* ignore from now on, so disable until driver reloaded */
dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
*msg = 0; /* recovered from all of them */
if (isfatal && !dd->diag_client) {
- qib_dev_err(dd, "Fatal Hardware Error, no longer"
- " usable, SN %.16s\n", dd->serial);
+ qib_dev_err(dd,
+ "Fatal Hardware Error, no longer usable, SN %.16s\n",
+ dd->serial);
/*
* for /sys status file and user programs to print; if no
* trailing brace is copied, we'll know it was truncated.
qib_inc_eeprom_err(dd, log_idx, 1);
if (errs & ~IB_E_BITSEXTANT)
- qib_dev_err(dd, "error interrupt with unknown errors "
- "%llx set\n",
- (unsigned long long) (errs & ~IB_E_BITSEXTANT));
+ qib_dev_err(dd,
+ "error interrupt with unknown errors %llx set\n",
+ (unsigned long long) (errs & ~IB_E_BITSEXTANT));
if (errs & E_SUM_ERRS) {
qib_disarm_6120_senderrbufs(ppd);
}
if (errs & ERR_MASK(ResetNegated)) {
- qib_dev_err(dd, "Got reset, requires re-init "
- "(unload and reload driver)\n");
+ qib_dev_err(dd,
+ "Got reset, requires re-init (unload and reload driver)\n");
dd->flags &= ~QIB_INITTED; /* needs re-init */
/* mark as having had error */
*dd->devstatusp |= QIB_STATUS_HWERROR;
qib_stats.sps_errints++;
estat = qib_read_kreg64(dd, kr_errstatus);
if (!estat)
- qib_devinfo(dd->pcidev, "error interrupt (%Lx), "
- "but no error bits set!\n", istat);
+ qib_devinfo(dd->pcidev,
+ "error interrupt (%Lx), but no error bits set!\n",
+ istat);
handle_6120_errors(dd, estat);
}
}
if (!dd->cspec->irq)
- qib_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
- "work\n");
+ qib_dev_err(dd,
+ "irq is 0, BIOS error? Interrupts won't work\n");
else {
int ret;
ret = request_irq(dd->cspec->irq, qib_6120intr, 0,
QIB_DRV_NAME, dd);
if (ret)
- qib_dev_err(dd, "Couldn't setup interrupt "
- "(irq=%d): %d\n", dd->cspec->irq,
- ret);
+ qib_dev_err(dd,
+ "Couldn't setup interrupt (irq=%d): %d\n",
+ dd->cspec->irq, ret);
}
}
snprintf(dd->boardname, namelen, "%s", n);
if (dd->majrev != 4 || !dd->minrev || dd->minrev > 2)
- qib_dev_err(dd, "Unsupported InfiniPath hardware revision "
- "%u.%u!\n", dd->majrev, dd->minrev);
+ qib_dev_err(dd,
+ "Unsupported InfiniPath hardware revision %u.%u!\n",
+ dd->majrev, dd->minrev);
snprintf(dd->boardversion, sizeof(dd->boardversion),
"ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
bail:
if (ret) {
if (qib_pcie_params(dd, dd->lbus_width, NULL, NULL))
- qib_dev_err(dd, "Reset failed to setup PCIe or "
- "interrupts; continuing anyway\n");
+ qib_dev_err(dd,
+ "Reset failed to setup PCIe or interrupts; continuing anyway\n");
/* clear the reset error, init error/hwerror mask */
qib_6120_init_hwerrors(dd);
/* for Rev2 error interrupts; nop for rev 1 */
}
pa >>= 11;
if (pa & ~QLOGIC_IB_RT_ADDR_MASK) {
- qib_dev_err(dd, "Physical page address 0x%lx "
- "larger than supported\n", pa);
+ qib_dev_err(dd,
+ "Physical page address 0x%lx larger than supported\n",
+ pa);
return;
}
}
pa >>= 11;
if (pa & ~QLOGIC_IB_RT_ADDR_MASK) {
- qib_dev_err(dd, "Physical page address 0x%lx "
- "larger than supported\n", pa);
+ qib_dev_err(dd,
+ "Physical page address 0x%lx larger than supported\n",
+ pa);
return;
}
ppd->dd->unit, ppd->port);
} else if (!strncmp(what, "off", 3)) {
ppd->dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback);
- qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback "
- "(normal)\n", ppd->dd->unit, ppd->port);
+ qib_devinfo(ppd->dd->pcidev,
+ "Disabling IB%u:%u IBC loopback (normal)\n",
+ ppd->dd->unit, ppd->port);
} else
ret = -EINVAL;
if (!ret) {
qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
val = qib_read_kreg64(dd, kr_sendpioavailaddr);
if (val != dd->pioavailregs_phys) {
- qib_dev_err(dd, "Catastrophic software error, "
- "SendPIOAvailAddr written as %lx, "
- "read back as %llx\n",
- (unsigned long) dd->pioavailregs_phys,
- (unsigned long long) val);
+ qib_dev_err(dd,
+ "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
+ (unsigned long) dd->pioavailregs_phys,
+ (unsigned long long) val);
ret = -EINVAL;
}
return ret;
dd->revision = readq(&dd->kregbase[kr_revision]);
if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
- qib_dev_err(dd, "Revision register read failure, "
- "giving up initialization\n");
+ qib_dev_err(dd,
+ "Revision register read failure, giving up initialization\n");
ret = -ENODEV;
goto bail;
}
goto bail;
if (qib_pcie_params(dd, 8, NULL, NULL))
- qib_dev_err(dd, "Failed to setup PCIe or interrupts; "
- "continuing anyway\n");
+ qib_dev_err(dd,
+ "Failed to setup PCIe or interrupts; continuing anyway\n");
dd->cspec->irq = pdev->irq; /* save IRQ */
/* clear diagctrl register, in case diags were running and crashed */
sdma_7220_errors(ppd, errs);
if (errs & ~IB_E_BITSEXTANT)
- qib_dev_err(dd, "error interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (errs & ~IB_E_BITSEXTANT));
+ qib_dev_err(dd,
+ "error interrupt with unknown errors %llx set\n",
+ (unsigned long long) (errs & ~IB_E_BITSEXTANT));
if (errs & E_SUM_ERRS) {
qib_disarm_7220_senderrbufs(ppd);
}
if (errs & ERR_MASK(ResetNegated)) {
- qib_dev_err(dd, "Got reset, requires re-init "
- "(unload and reload driver)\n");
+ qib_dev_err(dd,
+ "Got reset, requires re-init (unload and reload driver)\n");
dd->flags &= ~QIB_INITTED; /* needs re-init */
/* mark as having had error */
*dd->devstatusp |= QIB_STATUS_HWERROR;
if (!hwerrs)
goto bail;
if (hwerrs == ~0ULL) {
- qib_dev_err(dd, "Read of hardware error status failed "
- "(all bits set); ignoring\n");
+ qib_dev_err(dd,
+ "Read of hardware error status failed (all bits set); ignoring\n");
goto bail;
}
qib_stats.sps_hwerrs++;
qib_inc_eeprom_err(dd, log_idx, 1);
if (hwerrs & ~(TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC |
RXE_PARITY))
- qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx "
- "(cleared)\n", (unsigned long long) hwerrs);
+ qib_devinfo(dd->pcidev,
+ "Hardware error: hwerr=0x%llx (cleared)\n",
+ (unsigned long long) hwerrs);
if (hwerrs & ~IB_HWE_BITSEXTANT)
- qib_dev_err(dd, "hwerror interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (hwerrs & ~IB_HWE_BITSEXTANT));
+ qib_dev_err(dd,
+ "hwerror interrupt with unknown errors %llx set\n",
+ (unsigned long long) (hwerrs & ~IB_HWE_BITSEXTANT));
if (hwerrs & QLOGIC_IB_HWE_IB_UC_MEMORYPARITYERR)
qib_sd7220_clr_ibpar(dd);
if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
isfatal = 1;
- strlcat(msg, "[Memory BIST test failed, "
- "InfiniPath hardware unusable]", msgl);
+ strlcat(msg,
+ "[Memory BIST test failed, InfiniPath hardware unusable]",
+ msgl);
/* ignore from now on, so disable until driver reloaded */
dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
qib_dev_err(dd, "%s hardware error\n", msg);
if (isfatal && !dd->diag_client) {
- qib_dev_err(dd, "Fatal Hardware Error, no longer"
- " usable, SN %.16s\n", dd->serial);
+ qib_dev_err(dd,
+ "Fatal Hardware Error, no longer usable, SN %.16s\n",
+ dd->serial);
/*
* For /sys status file and user programs to print; if no
* trailing brace is copied, we'll know it was truncated.
qib_stats.sps_errints++;
estat = qib_read_kreg64(dd, kr_errstatus);
if (!estat)
- qib_devinfo(dd->pcidev, "error interrupt (%Lx), "
- "but no error bits set!\n", istat);
+ qib_devinfo(dd->pcidev,
+ "error interrupt (%Lx), but no error bits set!\n",
+ istat);
else
handle_7220_errors(dd, estat);
}
static void qib_setup_7220_interrupt(struct qib_devdata *dd)
{
if (!dd->cspec->irq)
- qib_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
- "work\n");
+ qib_dev_err(dd,
+ "irq is 0, BIOS error? Interrupts won't work\n");
else {
int ret = request_irq(dd->cspec->irq, qib_7220intr,
dd->msi_lo ? 0 : IRQF_SHARED,
QIB_DRV_NAME, dd);
if (ret)
- qib_dev_err(dd, "Couldn't setup %s interrupt "
- "(irq=%d): %d\n", dd->msi_lo ?
- "MSI" : "INTx", dd->cspec->irq, ret);
+ qib_dev_err(dd,
+ "Couldn't setup %s interrupt (irq=%d): %d\n",
+ dd->msi_lo ? "MSI" : "INTx",
+ dd->cspec->irq, ret);
}
}
snprintf(dd->boardname, namelen, "%s", n);
if (dd->majrev != 5 || !dd->minrev || dd->minrev > 2)
- qib_dev_err(dd, "Unsupported InfiniPath hardware "
- "revision %u.%u!\n",
- dd->majrev, dd->minrev);
+ qib_dev_err(dd,
+ "Unsupported InfiniPath hardware revision %u.%u!\n",
+ dd->majrev, dd->minrev);
snprintf(dd->boardversion, sizeof(dd->boardversion),
"ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
bail:
if (ret) {
if (qib_pcie_params(dd, dd->lbus_width, NULL, NULL))
- qib_dev_err(dd, "Reset failed to setup PCIe or "
- "interrupts; continuing anyway\n");
+ qib_dev_err(dd,
+ "Reset failed to setup PCIe or interrupts; continuing anyway\n");
/* hold IBC in reset, no sends, etc till later */
qib_write_kreg(dd, kr_control, 0ULL);
return;
}
if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
- qib_dev_err(dd, "Physical page address 0x%lx "
- "larger than supported\n", pa);
+ qib_dev_err(dd,
+ "Physical page address 0x%lx larger than supported\n",
+ pa);
return;
}
ppd->cpspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback);
/* enable heart beat again */
val = IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT;
- qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback "
- "(normal)\n", ppd->dd->unit, ppd->port);
+ qib_devinfo(ppd->dd->pcidev,
+ "Disabling IB%u:%u IBC loopback (normal)\n",
+ ppd->dd->unit, ppd->port);
} else
ret = -EINVAL;
if (!ret) {
if (!dd->msi_lo)
return 0;
- qib_devinfo(dd->pcidev, "MSI interrupt not detected,"
- " trying INTx interrupts\n");
+ qib_devinfo(dd->pcidev,
+ "MSI interrupt not detected, trying INTx interrupts\n");
qib_7220_free_irq(dd);
qib_enable_intx(dd->pcidev);
/*
qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
val = qib_read_kreg64(dd, kr_sendpioavailaddr);
if (val != dd->pioavailregs_phys) {
- qib_dev_err(dd, "Catastrophic software error, "
- "SendPIOAvailAddr written as %lx, "
- "read back as %llx\n",
- (unsigned long) dd->pioavailregs_phys,
- (unsigned long long) val);
+ qib_dev_err(dd,
+ "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
+ (unsigned long) dd->pioavailregs_phys,
+ (unsigned long long) val);
ret = -EINVAL;
}
qib_register_observer(dd, &sendctrl_observer);
dd->revision = readq(&dd->kregbase[kr_revision]);
if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
- qib_dev_err(dd, "Revision register read failure, "
- "giving up initialization\n");
+ qib_dev_err(dd,
+ "Revision register read failure, giving up initialization\n");
ret = -ENODEV;
goto bail;
}
break;
}
if (qib_pcie_params(dd, minwidth, NULL, NULL))
- qib_dev_err(dd, "Failed to setup PCIe or interrupts; "
- "continuing anyway\n");
+ qib_dev_err(dd,
+ "Failed to setup PCIe or interrupts; continuing anyway\n");
/* save IRQ for possible later use */
dd->cspec->irq = pdev->irq;
#include "qib_mad.h"
#include "qib_verbs.h"
+#undef pr_fmt
+#define pr_fmt(fmt) QIB_DRV_NAME " " fmt
+
static void qib_setup_7322_setextled(struct qib_pportdata *, u32);
static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t);
static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op);
qib_stats.sps_errints++;
errs = qib_read_kreg64(dd, kr_errstatus);
if (!errs) {
- qib_devinfo(dd->pcidev, "device error interrupt, "
- "but no error bits set!\n");
+ qib_devinfo(dd->pcidev,
+ "device error interrupt, but no error bits set!\n");
goto done;
}
if (errs & QIB_E_RESET) {
int pidx;
- qib_dev_err(dd, "Got reset, requires re-init "
- "(unload and reload driver)\n");
+ qib_dev_err(dd,
+ "Got reset, requires re-init (unload and reload driver)\n");
dd->flags &= ~QIB_INITTED; /* needs re-init */
/* mark as having had error */
*dd->devstatusp |= QIB_STATUS_HWERROR;
ppd->dd->cspec->r1 ?
QDR_STATIC_ADAPT_DOWN_R1 :
QDR_STATIC_ADAPT_DOWN);
- printk(KERN_INFO QIB_DRV_NAME
- " IB%u:%u re-enabled QDR adaptation "
- "ibclt %x\n", ppd->dd->unit, ppd->port, ibclt);
+ pr_info(
+ "IB%u:%u re-enabled QDR adaptation ibclt %x\n",
+ ppd->dd->unit, ppd->port, ibclt);
}
}
}
if (!*msg)
snprintf(msg, sizeof ppd->cpspec->epmsgbuf,
"no others");
- qib_dev_porterr(dd, ppd->port, "error interrupt with unknown"
- " errors 0x%016Lx set (and %s)\n",
- (errs & ~QIB_E_P_BITSEXTANT), msg);
+ qib_dev_porterr(dd, ppd->port,
+ "error interrupt with unknown errors 0x%016Lx set (and %s)\n",
+ (errs & ~QIB_E_P_BITSEXTANT), msg);
*msg = '\0';
}
if (!hwerrs)
goto bail;
if (hwerrs == ~0ULL) {
- qib_dev_err(dd, "Read of hardware error status failed "
- "(all bits set); ignoring\n");
+ qib_dev_err(dd,
+ "Read of hardware error status failed (all bits set); ignoring\n");
goto bail;
}
qib_stats.sps_hwerrs++;
/* no EEPROM logging, yet */
if (hwerrs)
- qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx "
- "(cleared)\n", (unsigned long long) hwerrs);
+ qib_devinfo(dd->pcidev,
+ "Hardware error: hwerr=0x%llx (cleared)\n",
+ (unsigned long long) hwerrs);
ctrl = qib_read_kreg32(dd, kr_control);
if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) {
if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
isfatal = 1;
- strlcpy(msg, "[Memory BIST test failed, "
- "InfiniPath hardware unusable]", msgl);
+ strlcpy(msg,
+ "[Memory BIST test failed, InfiniPath hardware unusable]",
+ msgl);
/* ignore from now on, so disable until driver reloaded */
dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
qib_dev_err(dd, "%s hardware error\n", msg);
if (isfatal && !dd->diag_client) {
- qib_dev_err(dd, "Fatal Hardware Error, no longer"
- " usable, SN %.16s\n", dd->serial);
+ qib_dev_err(dd,
+ "Fatal Hardware Error, no longer usable, SN %.16s\n",
+ dd->serial);
/*
* for /sys status file and user programs to print; if no
* trailing brace is copied, we'll know it was truncated.
char msg[128];
kills = istat & ~QIB_I_BITSEXTANT;
- qib_dev_err(dd, "Clearing reserved interrupt(s) 0x%016llx:"
- " %s\n", (unsigned long long) kills, msg);
+ qib_dev_err(dd,
+ "Clearing reserved interrupt(s) 0x%016llx: %s\n",
+ (unsigned long long) kills, msg);
qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills));
}
/* Try to get INTx interrupt */
try_intx:
if (!dd->pcidev->irq) {
- qib_dev_err(dd, "irq is 0, BIOS error? "
- "Interrupts won't work\n");
+ qib_dev_err(dd,
+ "irq is 0, BIOS error? Interrupts won't work\n");
goto bail;
}
ret = request_irq(dd->pcidev->irq, qib_7322intr,
IRQF_SHARED, QIB_DRV_NAME, dd);
if (ret) {
- qib_dev_err(dd, "Couldn't setup INTx "
- "interrupt (irq=%d): %d\n",
- dd->pcidev->irq, ret);
+ qib_dev_err(dd,
+ "Couldn't setup INTx interrupt (irq=%d): %d\n",
+ dd->pcidev->irq, ret);
goto bail;
}
dd->cspec->irq = dd->pcidev->irq;
* Shouldn't happen since the enable said we could
* have as many as we are trying to setup here.
*/
- qib_dev_err(dd, "Couldn't setup MSIx "
- "interrupt (vec=%d, irq=%d): %d\n", msixnum,
+ qib_dev_err(dd,
+ "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n",
+ msixnum,
dd->cspec->msix_entries[msixnum].msix.vector,
ret);
qib_7322_nomsix(dd);
(unsigned)SYM_FIELD(dd->revision, Revision_R, SW));
if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) {
- qib_devinfo(dd->pcidev, "IB%u: Forced to single port mode"
- " by module parameter\n", dd->unit);
+ qib_devinfo(dd->pcidev,
+ "IB%u: Forced to single port mode by module parameter\n",
+ dd->unit);
features &= PORT_SPD_CAP;
}
if (val == dd->revision)
break;
if (i == 5) {
- qib_dev_err(dd, "Failed to initialize after reset, "
- "unusable\n");
+ qib_dev_err(dd,
+ "Failed to initialize after reset, unusable\n");
ret = 0;
goto bail;
}
if (qib_pcie_params(dd, dd->lbus_width,
&dd->cspec->num_msix_entries,
dd->cspec->msix_entries))
- qib_dev_err(dd, "Reset failed to setup PCIe or interrupts; "
- "continuing anyway\n");
+ qib_dev_err(dd,
+ "Reset failed to setup PCIe or interrupts; continuing anyway\n");
qib_setup_7322_interrupt(dd, 1);
return;
}
if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) {
- qib_dev_err(dd, "Physical page address 0x%lx "
- "larger than supported\n", pa);
+ qib_dev_err(dd,
+ "Physical page address 0x%lx larger than supported\n",
+ pa);
return;
}
Loopback);
/* enable heart beat again */
val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB;
- qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback "
- "(normal)\n", ppd->dd->unit, ppd->port);
+ qib_devinfo(ppd->dd->pcidev,
+ "Disabling IB%u:%u IBC loopback (normal)\n",
+ ppd->dd->unit, ppd->port);
} else
ret = -EINVAL;
if (!ret) {
dd->pport[i].cpspec->portcntrs = kmalloc(dd->cspec->nportcntrs
* sizeof(u64), GFP_KERNEL);
if (!dd->pport[i].cpspec->portcntrs)
- qib_dev_err(dd, "Failed allocation for"
- " portcounters\n");
+ qib_dev_err(dd,
+ "Failed allocation for portcounters\n");
}
}
if (!dd->cspec->num_msix_entries)
return 0; /* already using INTx */
- qib_devinfo(dd->pcidev, "MSIx interrupt not detected,"
- " trying INTx interrupts\n");
+ qib_devinfo(dd->pcidev,
+ "MSIx interrupt not detected, trying INTx interrupts\n");
qib_7322_nomsix(dd);
qib_enable_intx(dd->pcidev);
qib_setup_7322_interrupt(dd, 0);
{
struct qib_devdata *dd;
unsigned long val;
- char *n;
+ int ret;
+
if (strlen(str) >= MAX_ATTEN_LEN) {
- printk(KERN_INFO QIB_DRV_NAME " txselect_values string "
- "too long\n");
+ pr_info("txselect_values string too long\n");
return -ENOSPC;
}
- val = simple_strtoul(str, &n, 0);
- if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ +
+ ret = kstrtoul(str, 0, &val);
+ if (ret || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ +
TXDDS_MFG_SZ)) {
- printk(KERN_INFO QIB_DRV_NAME
- "txselect_values must start with a number < %d\n",
+ pr_info("txselect_values must start with a number < %d\n",
TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ);
- return -EINVAL;
+ return ret ? ret : -EINVAL;
}
- strcpy(txselect_list, str);
+ strcpy(txselect_list, str);
list_for_each_entry(dd, &qib_dev_list, list)
if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322)
set_no_qsfp_atten(dd, 1);
qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
val = qib_read_kreg64(dd, kr_sendpioavailaddr);
if (val != dd->pioavailregs_phys) {
- qib_dev_err(dd, "Catastrophic software error, "
- "SendPIOAvailAddr written as %lx, "
- "read back as %llx\n",
- (unsigned long) dd->pioavailregs_phys,
- (unsigned long long) val);
+ qib_dev_err(dd,
+ "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
+ (unsigned long) dd->pioavailregs_phys,
+ (unsigned long long) val);
ret = -EINVAL;
}
dd->revision = readq(&dd->kregbase[kr_revision]);
if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
- qib_dev_err(dd, "Revision register read failure, "
- "giving up initialization\n");
+ qib_dev_err(dd,
+ "Revision register read failure, giving up initialization\n");
ret = -ENODEV;
goto bail;
}
*/
if (!(dd->flags & QIB_HAS_QSFP)) {
if (!IS_QMH(dd) && !IS_QME(dd))
- qib_devinfo(dd->pcidev, "IB%u:%u: "
- "Unknown mezzanine card type\n",
- dd->unit, ppd->port);
+ qib_devinfo(dd->pcidev,
+ "IB%u:%u: Unknown mezzanine card type\n",
+ dd->unit, ppd->port);
cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME;
/*
* Choose center value as default tx serdes setting
dd->cspec->msix_entries[i].msix.entry = i;
if (qib_pcie_params(dd, 8, &tabsize, dd->cspec->msix_entries))
- qib_dev_err(dd, "Failed to setup PCIe or interrupts; "
- "continuing anyway\n");
+ qib_dev_err(dd,
+ "Failed to setup PCIe or interrupts; continuing anyway\n");
/* may be less than we wanted, if not enough available */
dd->cspec->num_msix_entries = tabsize;
ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ +
TXDDS_MFG_SZ)) {
idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ);
- printk(KERN_INFO QIB_DRV_NAME
- " IB%u:%u use idx %u into txdds_mfg\n",
+ pr_info("IB%u:%u use idx %u into txdds_mfg\n",
ppd->dd->unit, ppd->port, idx);
*sdr_dds = &txdds_extra_mfg[idx];
*ddr_dds = &txdds_extra_mfg[idx];
u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN);
if (enable && !state) {
- printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n",
+ pr_info("IB%u:%u Turning LOS on\n",
ppd->dd->unit, ppd->port);
data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
} else if (!enable && state) {
- printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n",
+ pr_info("IB%u:%u Turning LOS off\n",
ppd->dd->unit, ppd->port);
data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
}
}
}
if (chan_done) {
- printk(KERN_INFO QIB_DRV_NAME
- " Serdes %d calibration not done after .5 sec: 0x%x\n",
+ pr_info("Serdes %d calibration not done after .5 sec: 0x%x\n",
IBSD(ppd->hw_pidx), chan_done);
} else {
for (chan = 0; chan < SERDES_CHANS; ++chan) {
(chan + (chan >> 1)),
25, 0, 0);
if ((~rxcaldone & (u32)BMASK(10, 10)) == 0)
- printk(KERN_INFO QIB_DRV_NAME
- " Serdes %d chan %d calibration "
- "failed\n", IBSD(ppd->hw_pidx), chan);
+ pr_info("Serdes %d chan %d calibration failed\n",
+ IBSD(ppd->hw_pidx), chan);
}
}
#include <linux/delay.h>
#include <linux/idr.h>
#include <linux/module.h>
+#include <linux/printk.h>
#include "qib.h"
#include "qib_common.h"
#include "qib_mad.h"
+#undef pr_fmt
+#define pr_fmt(fmt) QIB_DRV_NAME ": " fmt
+
/*
* min buffers we want to have per context, after driver
*/
*/
dd->rcd = kzalloc(sizeof(*dd->rcd) * dd->ctxtcnt, GFP_KERNEL);
if (!dd->rcd) {
- qib_dev_err(dd, "Unable to allocate ctxtdata array, "
- "failing\n");
+ qib_dev_err(dd,
+ "Unable to allocate ctxtdata array, failing\n");
ret = -ENOMEM;
goto done;
}
ppd = dd->pport + (i % dd->num_pports);
rcd = qib_create_ctxtdata(ppd, i);
if (!rcd) {
- qib_dev_err(dd, "Unable to allocate ctxtdata"
- " for Kernel ctxt, failing\n");
+ qib_dev_err(dd,
+ "Unable to allocate ctxtdata for Kernel ctxt, failing\n");
ret = -ENOMEM;
goto done;
}
&dd->pcidev->dev, PAGE_SIZE, &dd->pioavailregs_phys,
GFP_KERNEL);
if (!dd->pioavailregs_dma) {
- qib_dev_err(dd, "failed to allocate PIOavail reg area "
- "in memory\n");
+ qib_dev_err(dd,
+ "failed to allocate PIOavail reg area in memory\n");
ret = -ENOMEM;
goto done;
}
pages = vzalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(struct page *));
if (!pages) {
- qib_dev_err(dd, "failed to allocate shadow page * "
- "array, no expected sends!\n");
+ qib_dev_err(dd,
+ "failed to allocate shadow page * array, no expected sends!\n");
goto bail;
}
addrs = vzalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(dma_addr_t));
if (!addrs) {
- qib_dev_err(dd, "failed to allocate shadow dma handle "
- "array, no expected sends!\n");
+ qib_dev_err(dd,
+ "failed to allocate shadow dma handle array, no expected sends!\n");
goto bail_free;
}
if (((dd->revision >> QLOGIC_IB_R_SOFTWARE_SHIFT) &
QLOGIC_IB_R_SOFTWARE_MASK) != QIB_CHIP_SWVERSION) {
- qib_dev_err(dd, "Driver only handles version %d, "
- "chip swversion is %d (%llx), failng\n",
- QIB_CHIP_SWVERSION,
- (int)(dd->revision >>
+ qib_dev_err(dd,
+ "Driver only handles version %d, chip swversion is %d (%llx), failng\n",
+ QIB_CHIP_SWVERSION,
+ (int)(dd->revision >>
QLOGIC_IB_R_SOFTWARE_SHIFT) &
- QLOGIC_IB_R_SOFTWARE_MASK,
- (unsigned long long) dd->revision);
+ QLOGIC_IB_R_SOFTWARE_MASK,
+ (unsigned long long) dd->revision);
ret = -ENOSYS;
goto done;
}
*/
if (dd->int_counter == 0) {
if (!dd->f_intr_fallback(dd))
- dev_err(&dd->pcidev->dev, "No interrupts detected, "
- "not usable.\n");
+ dev_err(&dd->pcidev->dev,
+ "No interrupts detected, not usable.\n");
else /* re-arm the timer to see if fallback works */
mod_timer(&dd->intrchk_timer, jiffies + HZ/2);
}
}
return 0;
wq_error:
- pr_err(
- QIB_DRV_NAME ": create_singlethread_workqueue failed for port %d\n",
- pidx + 1);
+ pr_err("create_singlethread_workqueue failed for port %d\n",
+ pidx + 1);
for (pidx = 0; pidx < dd->num_pports; ++pidx) {
ppd = dd->pport + pidx;
if (ppd->qib_wq) {
if (!lastfail)
lastfail = qib_setup_eagerbufs(rcd);
if (lastfail) {
- qib_dev_err(dd, "failed to allocate kernel ctxt's "
- "rcvhdrq and/or egr bufs\n");
+ qib_dev_err(dd,
+ "failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n");
continue;
}
}
/* 1 GiB/sec, slightly over IB SDR line rate */
if (lcnt < (emsecs * 1024U))
qib_dev_err(dd,
- "Performance problem: bandwidth to PIO buffers is "
- "only %u MiB/sec\n",
+ "Performance problem: bandwidth to PIO buffers is only %u MiB/sec\n",
lcnt / (u32) emsecs);
preempt_enable();
if (qib_cpulist)
qib_cpulist_count = count;
else
- qib_early_err(&pdev->dev, "Could not alloc cpulist "
- "info, cpu affinity might be wrong\n");
+ qib_early_err(&pdev->dev,
+ "Could not alloc cpulist info, cpu affinity might be wrong\n");
}
bail:
*/
idr_init(&qib_unit_table);
if (!idr_pre_get(&qib_unit_table, GFP_KERNEL)) {
- printk(KERN_ERR QIB_DRV_NAME ": idr_pre_get() failed\n");
+ pr_err("idr_pre_get() failed\n");
ret = -ENOMEM;
goto bail_cq_wq;
}
ret = pci_register_driver(&qib_driver);
if (ret < 0) {
- printk(KERN_ERR QIB_DRV_NAME
- ": Unable to register driver: error %d\n", -ret);
+ pr_err("Unable to register driver: error %d\n", -ret);
goto bail_unit;
}
/* not fatal if it doesn't work */
if (qib_init_qibfs())
- printk(KERN_ERR QIB_DRV_NAME ": Unable to register ipathfs\n");
+ pr_err("Unable to register ipathfs\n");
goto bail; /* all OK */
bail_unit:
ret = qib_exit_qibfs();
if (ret)
- printk(KERN_ERR QIB_DRV_NAME ": "
- "Unable to cleanup counter filesystem: "
- "error %d\n", -ret);
+ pr_err(
+ "Unable to cleanup counter filesystem: error %d\n",
+ -ret);
pci_unregister_driver(&qib_driver);
#ifdef CONFIG_PCI_MSI
dd = qib_init_iba6120_funcs(pdev, ent);
#else
- qib_early_err(&pdev->dev, "QLogic PCIE device 0x%x cannot "
- "work if CONFIG_PCI_MSI is not enabled\n",
- ent->device);
+ qib_early_err(&pdev->dev,
+ "QLogic PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n",
+ ent->device);
dd = ERR_PTR(-ENODEV);
#endif
break;
break;
default:
- qib_early_err(&pdev->dev, "Failing on unknown QLogic "
- "deviceid 0x%x\n", ent->device);
+ qib_early_err(&pdev->dev,
+ "Failing on unknown QLogic deviceid 0x%x\n",
+ ent->device);
ret = -ENODEV;
}
if (!qib_wc_pat) {
ret = qib_enable_wc(dd);
if (ret) {
- qib_dev_err(dd, "Write combining not enabled "
- "(err %d): performance may be poor\n",
- -ret);
+ qib_dev_err(dd,
+ "Write combining not enabled (err %d): performance may be poor\n",
+ -ret);
ret = 0;
}
}
gfp_flags | __GFP_COMP);
if (!rcd->rcvhdrq) {
- qib_dev_err(dd, "attempt to allocate %d bytes "
- "for ctxt %u rcvhdrq failed\n",
- amt, rcd->ctxt);
+ qib_dev_err(dd,
+ "attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n",
+ amt, rcd->ctxt);
goto bail;
}
return 0;
bail_free:
- qib_dev_err(dd, "attempt to allocate 1 page for ctxt %u "
- "rcvhdrqtailaddr failed\n", rcd->ctxt);
+ qib_dev_err(dd,
+ "attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n",
+ rcd->ctxt);
vfree(rcd->user_event_mask);
rcd->user_event_mask = NULL;
bail_free_hdrq:
* We print the message and disable interrupts, in hope of
* having a better chance of debugging the problem.
*/
- qib_dev_err(dd, "Read of chip interrupt status failed"
- " disabling interrupts\n");
+ qib_dev_err(dd,
+ "Read of chip interrupt status failed disabling interrupts\n");
if (allbits++) {
/* disable interrupt delivery, something is very wrong */
if (allbits == 2)
dd->f_set_intr_state(dd, 0);
if (allbits == 3) {
- qib_dev_err(dd, "2nd bad interrupt status, "
- "unregistering interrupts\n");
+ qib_dev_err(dd,
+ "2nd bad interrupt status, unregistering interrupts\n");
dd->flags |= QIB_BADINTR;
dd->flags &= ~QIB_INITTED;
dd->f_free_irq(dd);
}
do_intx:
if (ret) {
- qib_dev_err(dd, "pci_enable_msix %d vectors failed: %d, "
- "falling back to INTx\n", tabsize, ret);
+ qib_dev_err(dd,
+ "pci_enable_msix %d vectors failed: %d, falling back to INTx\n",
+ tabsize, ret);
tabsize = 0;
}
for (i = 0; i < tabsize; i++)
ret = pci_enable_msi(pdev);
if (ret)
- qib_dev_err(dd, "pci_enable_msi failed: %d, "
- "interrupts may not work\n", ret);
+ qib_dev_err(dd,
+ "pci_enable_msi failed: %d, interrupts may not work\n",
+ ret);
/* continue even if it fails, we may still be OK... */
pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO,
pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI);
if (!pos) {
- qib_dev_err(dd, "Can't find MSI capability, "
- "can't restore MSI settings\n");
+ qib_dev_err(dd,
+ "Can't find MSI capability, can't restore MSI settings\n");
ret = 0;
/* nothing special for MSIx, just MSI */
goto bail;
pci_write_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE, cline);
r = pci_enable_device(dd->pcidev);
if (r)
- qib_dev_err(dd, "pci_enable_device failed after "
- "reset: %d\n", r);
+ qib_dev_err(dd,
+ "pci_enable_device failed after reset: %d\n", r);
}
/* code to adjust PCIe capabilities. */
if (words == ~0ULL)
ret = PCI_ERS_RESULT_NEED_RESET;
}
- qib_devinfo(pdev, "QIB mmio_enabled function called, "
- "read wordscntr %Lx, returning %d\n", words, ret);
+ qib_devinfo(pdev,
+ "QIB mmio_enabled function called, read wordscntr %Lx, returning %d\n",
+ words, ret);
return ret;
}
/*
- * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
- * All rights reserved.
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES,
IB_CTRL2(chn), 0, 0);
if (ret < 0)
- qib_dev_err(dd, "Failed checking TRIMDONE, chn %d"
- " (%s)\n", chn, where);
+ qib_dev_err(dd,
+ "Failed checking TRIMDONE, chn %d (%s)\n",
+ chn, where);
if (!(ret & 0x10)) {
int probe;
baduns |= (1 << chn);
- qib_dev_err(dd, "TRIMDONE cleared on chn %d (%02X)."
- " (%s)\n", chn, ret, where);
+ qib_dev_err(dd,
+ "TRIMDONE cleared on chn %d (%02X). (%s)\n",
+ chn, ret, where);
probe = qib_sd7220_reg_mod(dd, IB_7220_SERDES,
IB_PGUDP(0), 0, 0);
qib_dev_err(dd, "probe is %d (%02X)\n",
ret = qib_sd7220_reg_mod(dd, IB_7220_SERDES,
IB_CTRL2(chn), 0x10, 0x10);
if (ret < 0)
- qib_dev_err(dd, "Failed re-setting "
- "TRIMDONE, chn %d (%s)\n",
+ qib_dev_err(dd,
+ "Failed re-setting TRIMDONE, chn %d (%s)\n",
chn, where);
}
}
if (ret < 0) {
int sloc = loc >> EPB_ADDR_SHF;
- qib_dev_err(dd, "pre-read failed: elt %d,"
- " addr 0x%X, chnl %d\n",
- (sloc & 0xF),
- (sloc >> 9) & 0x3f, chnl);
+ qib_dev_err(dd,
+ "pre-read failed: elt %d, addr 0x%X, chnl %d\n",
+ (sloc & 0xF),
+ (sloc >> 9) & 0x3f, chnl);
return ret;
}
val = (ret & ~mask) | (val & mask);
if (ret < 0) {
int sloc = loc >> EPB_ADDR_SHF;
- qib_dev_err(dd, "Global WR failed: elt %d,"
- " addr 0x%X, val %02X\n",
- (sloc & 0xF), (sloc >> 9) & 0x3f, val);
+ qib_dev_err(dd,
+ "Global WR failed: elt %d, addr 0x%X, val %02X\n",
+ (sloc & 0xF), (sloc >> 9) & 0x3f, val);
}
return ret;
}
if (ret < 0) {
int sloc = loc >> EPB_ADDR_SHF;
- qib_dev_err(dd, "Write failed: elt %d,"
- " addr 0x%X, chnl %d, val 0x%02X,"
- " mask 0x%02X\n",
- (sloc & 0xF), (sloc >> 9) & 0x3f, chnl,
- val & 0xFF, mask & 0xFF);
+ qib_dev_err(dd,
+ "Write failed: elt %d, addr 0x%X, chnl %d, val 0x%02X, mask 0x%02X\n",
+ (sloc & 0xF), (sloc >> 9) & 0x3f, chnl,
+ val & 0xFF, mask & 0xFF);
break;
}
}
/*
- * Copyright (c) 2007, 2008, 2009, 2010 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2007 - 2012 QLogic Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
GFP_KERNEL);
if (!ppd->sdma_descq) {
- qib_dev_err(ppd->dd, "failed to allocate SendDMA descriptor "
- "FIFO memory\n");
+ qib_dev_err(ppd->dd,
+ "failed to allocate SendDMA descriptor FIFO memory\n");
goto bail;
}
ppd->sdma_head_dma = dma_alloc_coherent(&ppd->dd->pcidev->dev,
PAGE_SIZE, &ppd->sdma_head_phys, GFP_KERNEL);
if (!ppd->sdma_head_dma) {
- qib_dev_err(ppd->dd, "failed to allocate SendDMA "
- "head memory\n");
+ qib_dev_err(ppd->dd,
+ "failed to allocate SendDMA head memory\n");
goto cleanup_descq;
}
ppd->sdma_head_dma[0] = 0;
#include "qib.h"
#include "qib_mad.h"
-/**
- * qib_parse_ushort - parse an unsigned short value in an arbitrary base
- * @str: the string containing the number
- * @valp: where to put the result
- *
- * Returns the number of bytes consumed, or negative value on error.
- */
-static int qib_parse_ushort(const char *str, unsigned short *valp)
-{
- unsigned long val;
- char *end;
- int ret;
-
- if (!isdigit(str[0])) {
- ret = -EINVAL;
- goto bail;
- }
-
- val = simple_strtoul(str, &end, 0);
-
- if (val > 0xffff) {
- ret = -EINVAL;
- goto bail;
- }
-
- *valp = val;
-
- ret = end + 1 - str;
- if (ret == 0)
- ret = -EINVAL;
-
-bail:
- return ret;
-}
-
/* start of per-port functions */
/*
* Get/Set heartbeat enable. OR of 1=enabled, 2=auto
int ret;
u16 val;
- ret = qib_parse_ushort(buf, &val);
+ ret = kstrtou16(buf, 0, &val);
+ if (ret) {
+ qib_dev_err(dd, "attempt to set invalid Heartbeat enable\n");
+ return ret;
+ }
/*
* Set the "intentional" heartbeat enable per either of
* because entering loopback mode overrides it and automatically
* disables heartbeat.
*/
- if (ret >= 0)
- ret = dd->f_set_ib_cfg(ppd, QIB_IB_CFG_HRTBT, val);
- if (ret < 0)
- qib_dev_err(dd, "attempt to set invalid Heartbeat enable\n");
+ ret = dd->f_set_ib_cfg(ppd, QIB_IB_CFG_HRTBT, val);
return ret < 0 ? ret : count;
}
int ret;
u16 val;
- ret = qib_parse_ushort(buf, &val);
- if (ret > 0)
- qib_set_led_override(ppd, val);
- else
+ ret = kstrtou16(buf, 0, &val);
+ if (ret) {
qib_dev_err(dd, "attempt to set invalid LED override\n");
- return ret < 0 ? ret : count;
+ return ret;
+ }
+
+ qib_set_led_override(ppd, val);
+ return count;
}
static ssize_t show_status(struct qib_pportdata *ppd, char *buf)
struct qib_pportdata *ppd =
container_of(kobj, struct qib_pportdata, diagc_kobj);
struct qib_ibport *qibp = &ppd->ibport_data;
- char *endp;
- long val = simple_strtol(buf, &endp, 0);
-
- if (val < 0 || endp == buf)
- return -EINVAL;
+ u32 val;
+ int ret;
+ ret = kstrtou32(buf, 0, &val);
+ if (ret)
+ return ret;
*(u32 *)((char *) qibp + dattr->counter) = val;
return size;
}
int ret;
if (!port_num || port_num > dd->num_pports) {
- qib_dev_err(dd, "Skipping infiniband class with "
- "invalid port %u\n", port_num);
+ qib_dev_err(dd,
+ "Skipping infiniband class with invalid port %u\n",
+ port_num);
ret = -ENODEV;
goto bail;
}
ret = kobject_init_and_add(&ppd->pport_kobj, &qib_port_ktype, kobj,
"linkcontrol");
if (ret) {
- qib_dev_err(dd, "Skipping linkcontrol sysfs info, "
- "(err %d) port %u\n", ret, port_num);
+ qib_dev_err(dd,
+ "Skipping linkcontrol sysfs info, (err %d) port %u\n",
+ ret, port_num);
goto bail;
}
kobject_uevent(&ppd->pport_kobj, KOBJ_ADD);
ret = kobject_init_and_add(&ppd->sl2vl_kobj, &qib_sl2vl_ktype, kobj,
"sl2vl");
if (ret) {
- qib_dev_err(dd, "Skipping sl2vl sysfs info, "
- "(err %d) port %u\n", ret, port_num);
+ qib_dev_err(dd,
+ "Skipping sl2vl sysfs info, (err %d) port %u\n",
+ ret, port_num);
goto bail_link;
}
kobject_uevent(&ppd->sl2vl_kobj, KOBJ_ADD);
ret = kobject_init_and_add(&ppd->diagc_kobj, &qib_diagc_ktype, kobj,
"diag_counters");
if (ret) {
- qib_dev_err(dd, "Skipping diag_counters sysfs info, "
- "(err %d) port %u\n", ret, port_num);
+ qib_dev_err(dd,
+ "Skipping diag_counters sysfs info, (err %d) port %u\n",
+ ret, port_num);
goto bail_sl;
}
kobject_uevent(&ppd->diagc_kobj, KOBJ_ADD);
/*
- * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
goto failed_write;
ret = qib_twsi_wr(dd, addr, 0);
if (ret) {
- qib_dev_err(dd, "Failed to write interface"
- " write addr %02X\n", addr);
+ qib_dev_err(dd,
+ "Failed to write interface write addr %02X\n",
+ addr);
goto failed_write;
}
}
/*
- * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
u64 atmp;
atmp = pioaddr & ~(piolen - 1);
if (atmp < addr || (atmp + piolen) > (addr + len)) {
- qib_dev_err(dd, "No way to align address/size "
- "(%llx/%llx), no WC mtrr\n",
- (unsigned long long) atmp,
- (unsigned long long) piolen << 1);
+ qib_dev_err(dd,
+ "No way to align address/size (%llx/%llx), no WC mtrr\n",
+ (unsigned long long) atmp,
+ (unsigned long long) piolen << 1);
ret = -ENODEV;
} else {
pioaddr = atmp;
if (cookie < 0) {
{
qib_devinfo(dd->pcidev,
- "mtrr_add() WC for PIO bufs "
- "failed (%d)\n",
+ "mtrr_add() WC for PIO bufs failed (%d)\n",
cookie);
ret = -EINVAL;
}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff