i2c-designware: Use local version of readl & writel
authorJean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>
Thu, 6 Oct 2011 18:26:25 +0000 (11:26 -0700)
committerBen Dooks <ben-linux@fluff.org>
Sat, 29 Oct 2011 10:00:50 +0000 (11:00 +0100)
Use local versions of readl & writel, so per-access manipulations may be performed

Signed-off-by: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
drivers/i2c/busses/i2c-designware.c

index 1b42b50b59923b58d68d6b210e5615087a022405..28335c3717d9782ed774ee9c0685079cb8eeca36 100644 (file)
@@ -220,6 +220,16 @@ struct dw_i2c_dev {
        unsigned int            rx_fifo_depth;
 };
 
+static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+       return readl(dev->base + offset);
+}
+
+static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+       writel(b, dev->base + offset);
+}
+
 static u32
 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 {
@@ -289,7 +299,7 @@ static void i2c_dw_init(struct dw_i2c_dev *dev)
        u32 ic_con, hcnt, lcnt;
 
        /* Disable the adapter */
-       writel(0, dev->base + DW_IC_ENABLE);
+       dw_writel(dev, 0, DW_IC_ENABLE);
 
        /* set standard and fast speed deviders for high/low periods */
 
@@ -303,8 +313,8 @@ static void i2c_dw_init(struct dw_i2c_dev *dev)
                                47,     /* tLOW = 4.7 us */
                                3,      /* tf = 0.3 us */
                                0);     /* No offset */
-       writel(hcnt, dev->base + DW_IC_SS_SCL_HCNT);
-       writel(lcnt, dev->base + DW_IC_SS_SCL_LCNT);
+       dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+       dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
        dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
        /* Fast-mode */
@@ -317,18 +327,18 @@ static void i2c_dw_init(struct dw_i2c_dev *dev)
                                13,     /* tLOW = 1.3 us */
                                3,      /* tf = 0.3 us */
                                0);     /* No offset */
-       writel(hcnt, dev->base + DW_IC_FS_SCL_HCNT);
-       writel(lcnt, dev->base + DW_IC_FS_SCL_LCNT);
+       dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+       dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
        dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
        /* Configure Tx/Rx FIFO threshold levels */
-       writel(dev->tx_fifo_depth - 1, dev->base + DW_IC_TX_TL);
-       writel(0, dev->base + DW_IC_RX_TL);
+       dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
+       dw_writel(dev, 0, DW_IC_RX_TL);
 
        /* configure the i2c master */
        ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
                DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
-       writel(ic_con, dev->base + DW_IC_CON);
+       dw_writel(dev, ic_con, DW_IC_CON);
 }
 
 /*
@@ -338,7 +348,7 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 {
        int timeout = TIMEOUT;
 
-       while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+       while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
                if (timeout <= 0) {
                        dev_warn(dev->dev, "timeout waiting for bus ready\n");
                        return -ETIMEDOUT;
@@ -356,24 +366,24 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
        u32 ic_con;
 
        /* Disable the adapter */
-       writel(0, dev->base + DW_IC_ENABLE);
+       dw_writel(dev, 0, DW_IC_ENABLE);
 
        /* set the slave (target) address */
-       writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+       dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
 
        /* if the slave address is ten bit address, enable 10BITADDR */
-       ic_con = readl(dev->base + DW_IC_CON);
+       ic_con = dw_readl(dev, DW_IC_CON);
        if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
                ic_con |= DW_IC_CON_10BITADDR_MASTER;
        else
                ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
-       writel(ic_con, dev->base + DW_IC_CON);
+       dw_writel(dev, ic_con, DW_IC_CON);
 
        /* Enable the adapter */
-       writel(1, dev->base + DW_IC_ENABLE);
+       dw_writel(dev, 1, DW_IC_ENABLE);
 
        /* Enable interrupts */
-       writel(DW_IC_INTR_DEFAULT_MASK, dev->base + DW_IC_INTR_MASK);
+       dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
 }
 
 /*
@@ -420,15 +430,15 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
                        buf_len = msgs[dev->msg_write_idx].len;
                }
 
-               tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
-               rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+               tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
+               rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
 
                while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
                        if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
-                               writel(0x100, dev->base + DW_IC_DATA_CMD);
+                               dw_writel(dev, 0x100, DW_IC_DATA_CMD);
                                rx_limit--;
                        } else
-                               writel(*buf++, dev->base + DW_IC_DATA_CMD);
+                               dw_writel(dev, *buf++, DW_IC_DATA_CMD);
                        tx_limit--; buf_len--;
                }
 
@@ -453,7 +463,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
        if (dev->msg_err)
                intr_mask = 0;
 
-       writel(intr_mask, dev->base + DW_IC_INTR_MASK);
+       dw_writel(dev, intr_mask, DW_IC_INTR_MASK);
 }
 
 static void
@@ -477,10 +487,10 @@ i2c_dw_read(struct dw_i2c_dev *dev)
                        buf = dev->rx_buf;
                }
 
-               rx_valid = readl(dev->base + DW_IC_RXFLR);
+               rx_valid = dw_readl(dev, DW_IC_RXFLR);
 
                for (; len > 0 && rx_valid > 0; len--, rx_valid--)
-                       *buf++ = readl(dev->base + DW_IC_DATA_CMD);
+                       *buf++ = dw_readl(dev, DW_IC_DATA_CMD);
 
                if (len > 0) {
                        dev->status |= STATUS_READ_IN_PROGRESS;
@@ -563,7 +573,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
        /* no error */
        if (likely(!dev->cmd_err)) {
                /* Disable the adapter */
-               writel(0, dev->base + DW_IC_ENABLE);
+               dw_writel(dev, 0, DW_IC_ENABLE);
                ret = num;
                goto done;
        }
@@ -607,7 +617,7 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
         *
         * The raw version might be useful for debugging purposes.
         */
-       stat = readl(dev->base + DW_IC_INTR_STAT);
+       stat = dw_readl(dev, DW_IC_INTR_STAT);
 
        /*
         * Do not use the IC_CLR_INTR register to clear interrupts, or
@@ -617,31 +627,31 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
         * Instead, use the separately-prepared IC_CLR_* registers.
         */
        if (stat & DW_IC_INTR_RX_UNDER)
-               readl(dev->base + DW_IC_CLR_RX_UNDER);
+               dw_readl(dev, DW_IC_CLR_RX_UNDER);
        if (stat & DW_IC_INTR_RX_OVER)
-               readl(dev->base + DW_IC_CLR_RX_OVER);
+               dw_readl(dev, DW_IC_CLR_RX_OVER);
        if (stat & DW_IC_INTR_TX_OVER)
-               readl(dev->base + DW_IC_CLR_TX_OVER);
+               dw_readl(dev, DW_IC_CLR_TX_OVER);
        if (stat & DW_IC_INTR_RD_REQ)
-               readl(dev->base + DW_IC_CLR_RD_REQ);
+               dw_readl(dev, DW_IC_CLR_RD_REQ);
        if (stat & DW_IC_INTR_TX_ABRT) {
                /*
                 * The IC_TX_ABRT_SOURCE register is cleared whenever
                 * the IC_CLR_TX_ABRT is read.  Preserve it beforehand.
                 */
-               dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);
-               readl(dev->base + DW_IC_CLR_TX_ABRT);
+               dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
+               dw_readl(dev, DW_IC_CLR_TX_ABRT);
        }
        if (stat & DW_IC_INTR_RX_DONE)
-               readl(dev->base + DW_IC_CLR_RX_DONE);
+               dw_readl(dev, DW_IC_CLR_RX_DONE);
        if (stat & DW_IC_INTR_ACTIVITY)
-               readl(dev->base + DW_IC_CLR_ACTIVITY);
+               dw_readl(dev, DW_IC_CLR_ACTIVITY);
        if (stat & DW_IC_INTR_STOP_DET)
-               readl(dev->base + DW_IC_CLR_STOP_DET);
+               dw_readl(dev, DW_IC_CLR_STOP_DET);
        if (stat & DW_IC_INTR_START_DET)
-               readl(dev->base + DW_IC_CLR_START_DET);
+               dw_readl(dev, DW_IC_CLR_START_DET);
        if (stat & DW_IC_INTR_GEN_CALL)
-               readl(dev->base + DW_IC_CLR_GEN_CALL);
+               dw_readl(dev, DW_IC_CLR_GEN_CALL);
 
        return stat;
 }
@@ -666,7 +676,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
                 * Anytime TX_ABRT is set, the contents of the tx/rx
                 * buffers are flushed.  Make sure to skip them.
                 */
-               writel(0, dev->base + DW_IC_INTR_MASK);
+               dw_writel(dev, 0, DW_IC_INTR_MASK);
                goto tx_aborted;
        }
 
@@ -747,14 +757,14 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
                goto err_unuse_clocks;
        }
        {
-               u32 param1 = readl(dev->base + DW_IC_COMP_PARAM_1);
+               u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
 
                dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
                dev->rx_fifo_depth = ((param1 >> 8)  & 0xff) + 1;
        }
        i2c_dw_init(dev);
 
-       writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
+       dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */
        r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
        if (r) {
                dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
@@ -810,7 +820,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
        clk_put(dev->clk);
        dev->clk = NULL;
 
-       writel(0, dev->base + DW_IC_ENABLE);
+       dw_writel(dev, 0, DW_IC_ENABLE);
        free_irq(dev->irq, dev);
        kfree(dev);