ARM: mx28: Add SPI 2 pinmux into imx28.dtsi

Add this SSP port 2 pin multiplexing configuration into the imx28.dtsi file.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index ece801c727f9e9679173c3ae783a0edf7c712e32..fa5253a1f16db8cfab0965d5c4f807899d33d78a 100644 (file)
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -528,6 +528,19 @@
                                        fsl,voltage = <1>;
                                        fsl,pull-up = <0>;
                                };
+
+                               spi2_pins_a: spi2@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
+                                               0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
+                                               0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
+                                               0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
+                                       >;
+                                       fsl,drive-strength = <1>;
+                                       fsl,voltage = <1>;
+                                       fsl,pull-up = <1>;
+                               };
                        };
 
                        digctl@8001c000 {