keyspan: init termios properly
authorBorislav Petkov <bbpetkov@yahoo.de>
Thu, 15 Nov 2007 01:00:39 +0000 (17:00 -0800)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Thu, 15 Nov 2007 02:45:44 +0000 (18:45 -0800)
Remove redundant code leading to NULL ptr deref and let terminal config
settings take place in the proper initialization path in
usb_console_setup().

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Cc: <lucy@keyspan.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/usb/serial/keyspan.c

index 6bfdba6a213fc48699612933dea3c70d49ffe2bf..1f7ab15df36dead8dc571ecfc7495560fcdf2259 100644 (file)
@@ -1215,20 +1215,18 @@ static int keyspan_chars_in_buffer (struct usb_serial_port *port)
 
 static int keyspan_open (struct usb_serial_port *port, struct file *filp)
 {
-       struct keyspan_port_private     *p_priv;
-       struct keyspan_serial_private   *s_priv;
-       struct usb_serial               *serial = port->serial;
+       struct keyspan_port_private     *p_priv;
+       struct keyspan_serial_private   *s_priv;
+       struct usb_serial               *serial = port->serial;
        const struct keyspan_device_details     *d_details;
        int                             i, err;
-       int                             baud_rate, device_port;
        struct urb                      *urb;
-       unsigned int                    cflag;
 
        s_priv = usb_get_serial_data(serial);
        p_priv = usb_get_serial_port_data(port);
        d_details = p_priv->device_details;
-       
-       dbg("%s - port%d.", __FUNCTION__, port->number); 
+
+       dbg("%s - port%d.", __FUNCTION__, port->number);
 
        /* Set some sane defaults */
        p_priv->rts_state = 1;
@@ -1249,7 +1247,7 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp)
                urb->dev = serial->dev;
 
                /* make sure endpoint data toggle is synchronized with the device */
-               
+
                usb_clear_halt(urb->dev, urb->pipe);
 
                if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) {
@@ -1265,30 +1263,6 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp)
                /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
        }
 
-       /* get the terminal config for the setup message now so we don't 
-        * need to send 2 of them */
-
-       cflag = port->tty->termios->c_cflag;
-       device_port = port->number - port->serial->minor;
-
-       /* Baud rate calculation takes baud rate as an integer
-          so other rates can be generated if desired. */
-       baud_rate = tty_get_baud_rate(port->tty);
-       /* If no match or invalid, leave as default */          
-       if (baud_rate >= 0
-           && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
-                               NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
-               p_priv->baud = baud_rate;
-       }
-
-       /* set CTS/RTS handshake etc. */
-       p_priv->cflag = cflag;
-       p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
-
-       keyspan_send_setup(port, 1);
-       //mdelay(100);
-       //keyspan_set_termios(port, NULL);
-
        return (0);
 }