*/
#define MAX_SGE_TIMERVAL 200U
+#ifdef CONFIG_PCI_IOV
+/*
+ * Virtual Function provisioning constants. We need two extra Ingress Queues
+ * with Interrupt capability to serve as the VF's Firmware Event Queue and
+ * Forwarded Interrupt Queue (when using MSI mode) -- neither will have Free
+ * Lists associated with them). For each Ethernet/Control Egress Queue and
+ * for each Free List, we need an Egress Context.
+ */
+enum {
+ VFRES_NPORTS = 1, /* # of "ports" per VF */
+ VFRES_NQSETS = 2, /* # of "Queue Sets" per VF */
+
+ VFRES_NVI = VFRES_NPORTS, /* # of Virtual Interfaces */
+ VFRES_NETHCTRL = VFRES_NQSETS, /* # of EQs used for ETH or CTRL Qs */
+ VFRES_NIQFLINT = VFRES_NQSETS+2,/* # of ingress Qs/w Free List(s)/intr */
+ VFRES_NIQ = 0, /* # of non-fl/int ingress queues */
+ VFRES_NEQ = VFRES_NQSETS*2, /* # of egress queues */
+ VFRES_TC = 0, /* PCI-E traffic class */
+ VFRES_NEXACTF = 16, /* # of exact MPS filters */
+
+ VFRES_R_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF|FW_CMD_CAP_PORT,
+ VFRES_WX_CAPS = FW_CMD_CAP_DMAQ|FW_CMD_CAP_VF,
+};
+
+/*
+ * Provide a Port Access Rights Mask for the specified PF/VF. This is very
+ * static and likely not to be useful in the long run. We really need to
+ * implement some form of persistent configuration which the firmware
+ * controls.
+ */
+static unsigned int pfvfres_pmask(struct adapter *adapter,
+ unsigned int pf, unsigned int vf)
+{
+ unsigned int portn, portvec;
+
+ /*
+ * Give PF's access to all of the ports.
+ */
+ if (vf == 0)
+ return FW_PFVF_CMD_PMASK_MASK;
+
+ /*
+ * For VFs, we'll assign them access to the ports based purely on the
+ * PF. We assign active ports in order, wrapping around if there are
+ * fewer active ports than PFs: e.g. active port[pf % nports].
+ * Unfortunately the adapter's port_info structs haven't been
+ * initialized yet so we have to compute this.
+ */
+ if (adapter->params.nports == 0)
+ return 0;
+
+ portn = pf % adapter->params.nports;
+ portvec = adapter->params.portvec;
+ for (;;) {
+ /*
+ * Isolate the lowest set bit in the port vector. If we're at
+ * the port number that we want, return that as the pmask.
+ * otherwise mask that bit out of the port vector and
+ * decrement our port number ...
+ */
+ unsigned int pmask = portvec ^ (portvec & (portvec-1));
+ if (portn == 0)
+ return pmask;
+ portn--;
+ portvec &= ~pmask;
+ }
+ /*NOTREACHED*/
+}
+#endif
+
enum {
MEMWIN0_APERTURE = 65536,
MEMWIN0_BASE = 0x30000,
t4_read_mtu_tbl(adap, adap->params.mtus, NULL);
t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
adap->params.b_wnd);
+
+#ifdef CONFIG_PCI_IOV
+ /*
+ * Provision resource limits for Virtual Functions. We currently
+ * grant them all the same static resource limits except for the Port
+ * Access Rights Mask which we're assigning based on the PF. All of
+ * the static provisioning stuff for both the PF and VF really needs
+ * to be managed in a persistent manner for each device which the
+ * firmware controls.
+ */
+ {
+ int pf, vf;
+
+ for (pf = 0; pf < ARRAY_SIZE(num_vf); pf++) {
+ if (num_vf[pf] <= 0)
+ continue;
+
+ /* VF numbering starts at 1! */
+ for (vf = 1; vf <= num_vf[pf]; vf++) {
+ ret = t4_cfg_pfvf(adap, 0, pf, vf,
+ VFRES_NEQ, VFRES_NETHCTRL,
+ VFRES_NIQFLINT, VFRES_NIQ,
+ VFRES_TC, VFRES_NVI,
+ FW_PFVF_CMD_CMASK_MASK,
+ pfvfres_pmask(adap, pf, vf),
+ VFRES_NEXACTF,
+ VFRES_R_CAPS, VFRES_WX_CAPS);
+ if (ret < 0)
+ dev_warn(adap->pdev_dev, "failed to "
+ "provision pf/vf=%d/%d; "
+ "err=%d\n", pf, vf, ret);
+ }
+ }
+ }
+#endif
+
return 0;
/*