# define EVENT_RX_HALT 1
# define EVENT_RX_MEMORY 2
# define EVENT_STS_SPLIT 3
+# define EVENT_LINK_RESET 4
};
// device-specific info used by the driver
/* for status polling */
void (*status)(struct usbnet *, struct urb *);
+ /* link reset handling, called from defer_kevent */
+ int (*link_reset)(struct usbnet *);
+
/* fixup rx packet (strip framing) */
int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
static u32 usbnet_get_link (struct net_device *);
static u32 usbnet_get_msglevel (struct net_device *);
static void usbnet_set_msglevel (struct net_device *, u32);
+static void defer_kevent (struct usbnet *, int);
/* mostly for PDA style devices, which are always connected if present */
static int always_connected (struct usbnet *dev)
#define AX_CMD_WRITE_MULTI_FILTER 0x16
#define AX_CMD_READ_NODE_ID 0x17
#define AX_CMD_READ_PHY_ID 0x19
+#define AX_CMD_READ_MEDIUM_STATUS 0x1a
#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
#define AX_CMD_READ_MONITOR_MODE 0x1c
#define AX_CMD_WRITE_MONITOR_MODE 0x1d
#define AX_MONITOR_MAGIC 0x04
#define AX_MONITOR_HSFS 0x10
+/* AX88172 Medium Status Register values */
+#define AX_MEDIUM_FULL_DUPLEX 0x02
+#define AX_MEDIUM_TX_ABORT_ALLOW 0x04
+#define AX_MEDIUM_FLOW_CONTROL_EN 0x10
+
#define AX_MCAST_FILTER_SIZE 8
#define AX_MAX_MCAST 64
-#define AX_INTERRUPT_BUFSIZE 8
-
#define AX_EEPROM_LEN 0x40
#define AX_SWRESET_CLEAR 0x00
#define AX88772_IPG1_DEFAULT 0x0c
#define AX88772_IPG2_DEFAULT 0x12
+#define AX88772_MEDIUM_FULL_DUPLEX 0x0002
+#define AX88772_MEDIUM_RESERVED 0x0004
+#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010
+#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020
+#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080
+#define AX88772_MEDIUM_RX_ENABLE 0x0100
+#define AX88772_MEDIUM_100MB 0x0200
+#define AX88772_MEDIUM_DEFAULT \
+ (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \
+ AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \
+ AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE )
+
#define AX_EEPROM_MAGIC 0xdeadbeef
/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
struct ax8817x_data {
u8 multi_filter[AX_MCAST_FILTER_SIZE];
- struct urb *int_urb;
- u8 *int_buf;
};
+struct ax88172_int_data {
+ u16 res1;
+ u8 link;
+ u16 res2;
+ u8 status;
+ u16 res3;
+} __attribute__ ((packed));
+
static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data)
{
usb_free_urb(urb);
}
-static void ax8817x_interrupt_complete(struct urb *urb, struct pt_regs *regs)
+static void ax8817x_status(struct usbnet *dev, struct urb *urb)
{
- struct usbnet *dev = (struct usbnet *)urb->context;
- struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
+ struct ax88172_int_data *event;
int link;
- if (urb->status < 0) {
- devdbg(dev,"ax8817x_interrupt_complete() failed with %d",
- urb->status);
- } else {
- link = data->int_buf[2] & 0x01;
- if (netif_carrier_ok(dev->net) != link) {
- if (link)
- netif_carrier_on(dev->net);
- else
- netif_carrier_off(dev->net);
- devdbg(dev, "ax8817x - Link Status is: %d", link);
- }
- usb_submit_urb(data->int_urb, GFP_ATOMIC);
+ if (urb->actual_length < 8)
+ return;
+
+ event = urb->transfer_buffer;
+ link = event->link & 0x01;
+ if (netif_carrier_ok(dev->net) != link) {
+ if (link) {
+ netif_carrier_on(dev->net);
+ defer_kevent (dev, EVENT_LINK_RESET );
+ } else
+ netif_carrier_off(dev->net);
+ devdbg(dev, "ax8817x - Link Status is: %d", link);
}
}
ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
}
+static int ax88172_link_reset(struct usbnet *dev)
+{
+ u16 lpa;
+ u8 mode;
+
+ mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
+ lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA);
+ if (lpa & LPA_DUPLEX)
+ mode |= AX_MEDIUM_FULL_DUPLEX;
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+
+ return 0;
+}
+
static void ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
{
struct usbnet *dev = netdev_priv(net);
void *buf;
int i;
unsigned long gpio_bits = dev->driver_info->data;
- struct ax8817x_data *data = (struct ax8817x_data *)dev->data;
get_endpoints(dev,intf);
- if ((data->int_urb = usb_alloc_urb (0, GFP_KERNEL)) == NULL) {
- dbg ("%s: cannot allocate interrupt URB",
- dev->net->name);
- ret = -ENOMEM;
- goto out1;
- }
-
- if ((data->int_buf = kmalloc(AX_INTERRUPT_BUFSIZE, GFP_KERNEL)) == NULL) {
- dbg ("%s: cannot allocate memory for interrupt buffer",
- dev->net->name);
- ret = -ENOMEM;
- goto out1;
- }
- memset(data->int_buf, 0, AX_INTERRUPT_BUFSIZE);
-
- usb_fill_int_urb (data->int_urb, dev->udev,
- usb_rcvintpipe (dev->udev, 1),
- data->int_buf, AX_INTERRUPT_BUFSIZE,
- ax8817x_interrupt_complete, dev,
- dev->udev->speed == USB_SPEED_HIGH ? 8 : 100);
-
buf = kmalloc(ETH_ALEN, GFP_KERNEL);
if(!buf) {
ret = -ENOMEM;
- goto out2;
+ goto out1;
}
/* Toggle the GPIOs in a manufacturer/model specific way */
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
(gpio_bits >> (i * 8)) & 0xff, 0, 0,
buf)) < 0)
- goto out3;
+ goto out2;
msleep(5);
}
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x80, 0, 0, buf)) < 0) {
dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
- goto out3;
+ goto out2;
}
/* Get the MAC address */
memset(buf, 0, ETH_ALEN);
if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, 6, buf)) < 0) {
dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
- goto out3;
+ goto out2;
}
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
/* Get the PHY id */
if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) {
dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
- goto out3;
+ goto out2;
} else if (ret < 2) {
/* this should always return 2 bytes */
dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", ret);
ret = -EIO;
- goto out3;
+ goto out2;
}
/* Initialize MII structure */
dev->net->set_multicast_list = ax8817x_set_multicast;
dev->net->ethtool_ops = &ax8817x_ethtool_ops;
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
- cpu_to_le16(BMCR_RESET));
+ ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
- cpu_to_le16(ADVERTISE_ALL | ADVERTISE_CSMA | 0x0400));
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
mii_nway_restart(&dev->mii);
- if((ret = usb_submit_urb(data->int_urb, GFP_KERNEL)) < 0) {
- dbg("Failed to submit interrupt URB: %02x", ret);
- goto out2;
- }
-
return 0;
-out3:
- kfree(buf);
out2:
- kfree(data->int_buf);
+ kfree(buf);
out1:
- usb_free_urb(data->int_urb);
return ret;
}
-static void ax8817x_unbind(struct usbnet *dev, struct usb_interface *intf)
-{
- struct ax8817x_data *data = (struct ax8817x_data *)dev->data;
-
- usb_kill_urb(data->int_urb);
- usb_free_urb(data->int_urb);
- kfree(data->int_buf);
-}
-
static struct ethtool_ops ax88772_ethtool_ops = {
.get_drvinfo = ax8817x_get_drvinfo,
.get_link = ethtool_op_get_link,
{
int ret;
void *buf;
- struct ax8817x_data *data = (struct ax8817x_data *)dev->data;
get_endpoints(dev,intf);
- if ((data->int_urb = usb_alloc_urb (0, GFP_KERNEL)) == 0) {
- dbg ("Cannot allocate interrupt URB");
- ret = -ENOMEM;
- goto out1;
- }
-
- if ((data->int_buf = kmalloc(AX_INTERRUPT_BUFSIZE, GFP_KERNEL)) == NULL) {
- dbg ("Cannot allocate memory for interrupt buffer");
- ret = -ENOMEM;
- goto out1;
- }
- memset(data->int_buf, 0, AX_INTERRUPT_BUFSIZE);
-
- usb_fill_int_urb (data->int_urb, dev->udev,
- usb_rcvintpipe (dev->udev, 1),
- data->int_buf, AX_INTERRUPT_BUFSIZE,
- ax8817x_interrupt_complete, dev,
- dev->udev->speed == USB_SPEED_HIGH ? 8 : 100);
-
buf = kmalloc(6, GFP_KERNEL);
if(!buf) {
dbg ("Cannot allocate memory for buffer");
ret = -ENOMEM;
- goto out2;
+ goto out1;
}
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
0x00B0, 0, 0, buf)) < 0)
- goto out3;
+ goto out2;
msleep(5);
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0x0001, 0, 0, buf)) < 0) {
dbg("Select PHY #1 failed: %d", ret);
- goto out3;
+ goto out2;
}
if ((ret =
ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD, 0, 0, buf)) < 0) {
dbg("Failed to power down internal PHY: %d", ret);
- goto out3;
+ goto out2;
}
msleep(150);
if ((ret =
ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR, 0, 0, buf)) < 0) {
dbg("Failed to perform software reset: %d", ret);
- goto out3;
+ goto out2;
}
msleep(150);
if ((ret =
ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) {
dbg("Failed to set Internal/External PHY reset control: %d", ret);
- goto out3;
+ goto out2;
}
msleep(150);
ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0000, 0, 0,
buf)) < 0) {
dbg("Failed to reset RX_CTL: %d", ret);
- goto out3;
+ goto out2;
}
/* Get the MAC address */
memset(buf, 0, ETH_ALEN);
if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf)) < 0) {
dbg("Failed to read MAC address: %d", ret);
- goto out3;
+ goto out2;
}
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, buf)) < 0) {
dbg("Enabling software MII failed: %d", ret);
- goto out3;
+ goto out2;
}
if (((ret =
ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, 0x0010, 2, 2, buf)) < 0)
|| (*((u16 *)buf) != 0x003b)) {
dbg("Read PHY register 2 must be 0x3b00: %d", ret);
- goto out3;
+ goto out2;
}
/* Initialize MII structure */
/* Get the PHY id */
if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) {
dbg("Error reading PHY ID: %02x", ret);
- goto out3;
+ goto out2;
} else if (ret < 2) {
/* this should always return 2 bytes */
dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
ret);
ret = -EIO;
- goto out3;
+ goto out2;
}
dev->mii.phy_id = *((u8 *)buf + 1);
if ((ret =
ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL, 0, 0, buf)) < 0) {
dbg("Set external PHY reset pin level: %d", ret);
- goto out3;
+ goto out2;
}
msleep(150);
if ((ret =
ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) {
dbg("Set Internal/External PHY reset control: %d", ret);
- goto out3;
+ goto out2;
}
msleep(150);
dev->net->set_multicast_list = ax8817x_set_multicast;
dev->net->ethtool_ops = &ax88772_ethtool_ops;
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
- cpu_to_le16(BMCR_RESET));
+ ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
- cpu_to_le16(ADVERTISE_ALL | ADVERTISE_CSMA));
+ ADVERTISE_ALL | ADVERTISE_CSMA);
mii_nway_restart(&dev->mii);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, 0x0336, 0, 0, buf)) < 0) {
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
dbg("Write medium mode register: %d", ret);
- goto out3;
+ goto out2;
}
if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0, AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
- goto out3;
+ goto out2;
}
if ((ret =
ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
dbg("Failed to set hardware MII: %02x", ret);
- goto out3;
+ goto out2;
}
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
buf)) < 0) {
dbg("Reset RX_CTL failed: %d", ret);
- goto out3;
- }
-
- if((ret = usb_submit_urb(data->int_urb, GFP_KERNEL)) < 0) {
- dbg("Failed to submit interrupt URB: %02x", ret);
- goto out3;
+ goto out2;
}
kfree(buf);
return 0;
-out3:
- kfree(buf);
out2:
- kfree(data->int_buf);
+ kfree(buf);
out1:
- usb_free_urb(data->int_urb);
-
return ret;
}
return skb;
}
+static int ax88772_link_reset(struct usbnet *dev)
+{
+ u16 lpa;
+ u16 mode;
+
+ mode = AX88772_MEDIUM_DEFAULT;
+ lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA);
+
+ if ((lpa & LPA_DUPLEX) == 0)
+ mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
+ if ((lpa & LPA_100) == 0)
+ mode &= ~AX88772_MEDIUM_100MB;
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+
+ return 0;
+}
+
static const struct driver_info ax8817x_info = {
.description = "ASIX AX8817x USB 2.0 Ethernet",
.bind = ax8817x_bind,
- .unbind = ax8817x_unbind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
.flags = FLAG_ETHER,
.data = 0x00130103,
};
static const struct driver_info dlink_dub_e100_info = {
.description = "DLink DUB-E100 USB Ethernet",
.bind = ax8817x_bind,
- .unbind = ax8817x_unbind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
.flags = FLAG_ETHER,
.data = 0x009f9d9f,
};
static const struct driver_info netgear_fa120_info = {
.description = "Netgear FA-120 USB Ethernet",
.bind = ax8817x_bind,
- .unbind = ax8817x_unbind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
.flags = FLAG_ETHER,
.data = 0x00130103,
};
static const struct driver_info hawking_uf200_info = {
.description = "Hawking UF200 USB Ethernet",
.bind = ax8817x_bind,
- .unbind = ax8817x_unbind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
.flags = FLAG_ETHER,
.data = 0x001f1d1f,
};
static const struct driver_info ax88772_info = {
.description = "ASIX AX88772 USB 2.0 Ethernet",
.bind = ax88772_bind,
- .unbind = ax8817x_unbind,
+ .status = ax8817x_status,
+ .link_reset = ax88772_link_reset,
+ .reset = ax88772_link_reset,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88772_rx_fixup,
.tx_fixup = ax88772_tx_fixup,
}
}
+ if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
+ struct driver_info *info = dev->driver_info;
+ int retval = 0;
+
+ clear_bit (EVENT_LINK_RESET, &dev->flags);
+ if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
+ devinfo(dev, "link reset failed (%d) usbnet usb-%s-%s, %s",
+ retval,
+ dev->udev->bus->bus_name, dev->udev->devpath,
+ info->description);
+ }
+ }
+
if (dev->flags)
devdbg (dev, "kevent done, flags = 0x%lx",
dev->flags);
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff