struct ieee80211_tx_queue_params p;
};
-struct b43_wldev;
-
-/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
-struct b43_wl {
- /* Pointer to the active wireless device on this chip */
- struct b43_wldev *current_dev;
- /* Pointer to the ieee80211 hardware data structure */
- struct ieee80211_hw *hw;
-
- /* Global driver mutex. Every operation must run with this mutex locked. */
- struct mutex mutex;
- /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
- * handler, only. This basically is just the IRQ mask register. */
- spinlock_t hardirq_lock;
-
- /* The number of queues that were registered with the mac80211 subsystem
- * initially. This is a backup copy of hw->queues in case hw->queues has
- * to be dynamically lowered at runtime (Firmware does not support QoS).
- * hw->queues has to be restored to the original value before unregistering
- * from the mac80211 subsystem. */
- u16 mac80211_initially_registered_queues;
-
- /* We can only have one operating interface (802.11 core)
- * at a time. General information about this interface follows.
- */
-
- struct ieee80211_vif *vif;
- /* The MAC address of the operating interface. */
- u8 mac_addr[ETH_ALEN];
- /* Current BSSID */
- u8 bssid[ETH_ALEN];
- /* Interface type. (NL80211_IFTYPE_XXX) */
- int if_type;
- /* Is the card operating in AP, STA or IBSS mode? */
- bool operating;
- /* filter flags */
- unsigned int filter_flags;
- /* Stats about the wireless interface */
- struct ieee80211_low_level_stats ieee_stats;
-
-#ifdef CONFIG_B43_HWRNG
- struct hwrng rng;
- bool rng_initialized;
- char rng_name[30 + 1];
-#endif /* CONFIG_B43_HWRNG */
-
- /* List of all wireless devices on this chip */
- struct list_head devlist;
- u8 nr_devs;
-
- bool radiotap_enabled;
- bool radio_enabled;
-
- /* The beacon we are currently using (AP or IBSS mode). */
- struct sk_buff *current_beacon;
- bool beacon0_uploaded;
- bool beacon1_uploaded;
- bool beacon_templates_virgin; /* Never wrote the templates? */
- struct work_struct beacon_update_trigger;
-
- /* The current QOS parameters for the 4 queues. */
- struct b43_qos_params qos_params[4];
-
- /* Work for adjustment of the transmission power.
- * This is scheduled when we determine that the actual TX output
- * power doesn't match what we want. */
- struct work_struct txpower_adjust_work;
-
- /* Packet transmit work */
- struct work_struct tx_work;
- /* Queue of packets to be transmitted. */
- struct sk_buff_head tx_queue;
-
- /* The device LEDs. */
- struct b43_leds leds;
-};
+struct b43_wl;
/* The type of the firmware file. */
enum b43_firmware_file_type {
#endif
};
+/*
+ * Include goes here to avoid a dependency problem.
+ * A better fix would be to integrate xmit.h into b43.h.
+ */
+#include "xmit.h"
+
+/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
+struct b43_wl {
+ /* Pointer to the active wireless device on this chip */
+ struct b43_wldev *current_dev;
+ /* Pointer to the ieee80211 hardware data structure */
+ struct ieee80211_hw *hw;
+
+ /* Global driver mutex. Every operation must run with this mutex locked. */
+ struct mutex mutex;
+ /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
+ * handler, only. This basically is just the IRQ mask register. */
+ spinlock_t hardirq_lock;
+
+ /* The number of queues that were registered with the mac80211 subsystem
+ * initially. This is a backup copy of hw->queues in case hw->queues has
+ * to be dynamically lowered at runtime (Firmware does not support QoS).
+ * hw->queues has to be restored to the original value before unregistering
+ * from the mac80211 subsystem. */
+ u16 mac80211_initially_registered_queues;
+
+ /* We can only have one operating interface (802.11 core)
+ * at a time. General information about this interface follows.
+ */
+
+ struct ieee80211_vif *vif;
+ /* The MAC address of the operating interface. */
+ u8 mac_addr[ETH_ALEN];
+ /* Current BSSID */
+ u8 bssid[ETH_ALEN];
+ /* Interface type. (NL80211_IFTYPE_XXX) */
+ int if_type;
+ /* Is the card operating in AP, STA or IBSS mode? */
+ bool operating;
+ /* filter flags */
+ unsigned int filter_flags;
+ /* Stats about the wireless interface */
+ struct ieee80211_low_level_stats ieee_stats;
+
+#ifdef CONFIG_B43_HWRNG
+ struct hwrng rng;
+ bool rng_initialized;
+ char rng_name[30 + 1];
+#endif /* CONFIG_B43_HWRNG */
+
+ /* List of all wireless devices on this chip */
+ struct list_head devlist;
+ u8 nr_devs;
+
+ bool radiotap_enabled;
+ bool radio_enabled;
+
+ /* The beacon we are currently using (AP or IBSS mode). */
+ struct sk_buff *current_beacon;
+ bool beacon0_uploaded;
+ bool beacon1_uploaded;
+ bool beacon_templates_virgin; /* Never wrote the templates? */
+ struct work_struct beacon_update_trigger;
+
+ /* The current QOS parameters for the 4 queues. */
+ struct b43_qos_params qos_params[4];
+
+ /* Work for adjustment of the transmission power.
+ * This is scheduled when we determine that the actual TX output
+ * power doesn't match what we want. */
+ struct work_struct txpower_adjust_work;
+
+ /* Packet transmit work */
+ struct work_struct tx_work;
+ /* Queue of packets to be transmitted. */
+ struct sk_buff_head tx_queue;
+
+ /* The device LEDs. */
+ struct b43_leds leds;
+
+#ifdef CONFIG_B43_PIO
+ /*
+ * RX/TX header/tail buffers used by the frame transmit functions.
+ */
+ struct b43_rxhdr_fw4 rxhdr;
+ struct b43_txhdr txhdr;
+ u8 rx_tail[4];
+ u8 tx_tail[4];
+#endif /* CONFIG_B43_PIO */
+};
+
static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
{
return hw->priv;
unsigned int data_len)
{
struct b43_wldev *dev = q->dev;
+ struct b43_wl *wl = dev->wl;
const u8 *data = _data;
ctl |= B43_PIO_TXCTL_WRITELO | B43_PIO_TXCTL_WRITEHI;
q->mmio_base + B43_PIO_TXDATA,
sizeof(u16));
if (data_len & 1) {
- u8 tail[2] = { 0, };
-
/* Write the last byte. */
ctl &= ~B43_PIO_TXCTL_WRITEHI;
b43_piotx_write16(q, B43_PIO_TXCTL, ctl);
- tail[0] = data[data_len - 1];
- ssb_block_write(dev->dev, tail, 2,
+ wl->tx_tail[0] = data[data_len - 1];
+ wl->tx_tail[1] = 0;
+ ssb_block_write(dev->dev, wl->tx_tail, 2,
q->mmio_base + B43_PIO_TXDATA,
sizeof(u16));
}
unsigned int data_len)
{
struct b43_wldev *dev = q->dev;
+ struct b43_wl *wl = dev->wl;
const u8 *data = _data;
ctl |= B43_PIO8_TXCTL_0_7 | B43_PIO8_TXCTL_8_15 |
q->mmio_base + B43_PIO8_TXDATA,
sizeof(u32));
if (data_len & 3) {
- u8 tail[4] = { 0, };
-
+ wl->tx_tail[3] = 0;
/* Write the last few bytes. */
ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 |
B43_PIO8_TXCTL_24_31);
switch (data_len & 3) {
case 3:
ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15;
- tail[0] = data[data_len - 3];
- tail[1] = data[data_len - 2];
- tail[2] = data[data_len - 1];
+ wl->tx_tail[0] = data[data_len - 3];
+ wl->tx_tail[1] = data[data_len - 2];
+ wl->tx_tail[2] = data[data_len - 1];
break;
case 2:
ctl |= B43_PIO8_TXCTL_8_15;
- tail[0] = data[data_len - 2];
- tail[1] = data[data_len - 1];
+ wl->tx_tail[0] = data[data_len - 2];
+ wl->tx_tail[1] = data[data_len - 1];
+ wl->tx_tail[2] = 0;
break;
case 1:
- tail[0] = data[data_len - 1];
+ wl->tx_tail[0] = data[data_len - 1];
+ wl->tx_tail[1] = 0;
+ wl->tx_tail[2] = 0;
break;
}
b43_piotx_write32(q, B43_PIO8_TXCTL, ctl);
- ssb_block_write(dev->dev, tail, 4,
+ ssb_block_write(dev->dev, wl->tx_tail, 4,
q->mmio_base + B43_PIO8_TXDATA,
sizeof(u32));
}
static int pio_tx_frame(struct b43_pio_txqueue *q,
struct sk_buff *skb)
{
+ struct b43_wldev *dev = q->dev;
+ struct b43_wl *wl = dev->wl;
struct b43_pio_txpacket *pack;
- struct b43_txhdr txhdr;
u16 cookie;
int err;
unsigned int hdrlen;
struct b43_pio_txpacket, list);
cookie = generate_cookie(q, pack);
- hdrlen = b43_txhdr_size(q->dev);
- err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb,
+ hdrlen = b43_txhdr_size(dev);
+ err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb,
info, cookie);
if (err)
return err;
if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
/* Tell the firmware about the cookie of the last
* mcast frame, so it can clear the more-data bit in it. */
- b43_shm_write16(q->dev, B43_SHM_SHARED,
+ b43_shm_write16(dev, B43_SHM_SHARED,
B43_SHM_SH_MCASTCOOKIE, cookie);
}
pack->skb = skb;
if (q->rev >= 8)
- pio_tx_frame_4byte_queue(pack, (const u8 *)&txhdr, hdrlen);
+ pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
else
- pio_tx_frame_2byte_queue(pack, (const u8 *)&txhdr, hdrlen);
+ pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
/* Remove it from the list of available packet slots.
* It will be put back when we receive the status report. */
static bool pio_rx_frame(struct b43_pio_rxqueue *q)
{
struct b43_wldev *dev = q->dev;
- struct b43_rxhdr_fw4 rxhdr;
+ struct b43_wl *wl = dev->wl;
u16 len;
u32 macstat;
unsigned int i, padding;
struct sk_buff *skb;
const char *err_msg = NULL;
- memset(&rxhdr, 0, sizeof(rxhdr));
+ memset(&wl->rxhdr, 0, sizeof(wl->rxhdr));
/* Check if we have data and wait for it to get ready. */
if (q->rev >= 8) {
/* Get the preamble (RX header) */
if (q->rev >= 8) {
- ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
+ ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
q->mmio_base + B43_PIO8_RXDATA,
sizeof(u32));
} else {
- ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
+ ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
q->mmio_base + B43_PIO_RXDATA,
sizeof(u16));
}
/* Sanity checks. */
- len = le16_to_cpu(rxhdr.frame_len);
+ len = le16_to_cpu(wl->rxhdr.frame_len);
if (unlikely(len > 0x700)) {
err_msg = "len > 0x700";
goto rx_error;
goto rx_error;
}
- macstat = le32_to_cpu(rxhdr.mac_status);
+ macstat = le32_to_cpu(wl->rxhdr.mac_status);
if (macstat & B43_RX_MAC_FCSERR) {
if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) {
/* Drop frames with failed FCS. */
q->mmio_base + B43_PIO8_RXDATA,
sizeof(u32));
if (len & 3) {
- u8 tail[4] = { 0, };
-
/* Read the last few bytes. */
- ssb_block_read(dev->dev, tail, 4,
+ ssb_block_read(dev->dev, wl->rx_tail, 4,
q->mmio_base + B43_PIO8_RXDATA,
sizeof(u32));
switch (len & 3) {
case 3:
- skb->data[len + padding - 3] = tail[0];
- skb->data[len + padding - 2] = tail[1];
- skb->data[len + padding - 1] = tail[2];
+ skb->data[len + padding - 3] = wl->rx_tail[0];
+ skb->data[len + padding - 2] = wl->rx_tail[1];
+ skb->data[len + padding - 1] = wl->rx_tail[2];
break;
case 2:
- skb->data[len + padding - 2] = tail[0];
- skb->data[len + padding - 1] = tail[1];
+ skb->data[len + padding - 2] = wl->rx_tail[0];
+ skb->data[len + padding - 1] = wl->rx_tail[1];
break;
case 1:
- skb->data[len + padding - 1] = tail[0];
+ skb->data[len + padding - 1] = wl->rx_tail[0];
break;
}
}
q->mmio_base + B43_PIO_RXDATA,
sizeof(u16));
if (len & 1) {
- u8 tail[2] = { 0, };
-
/* Read the last byte. */
- ssb_block_read(dev->dev, tail, 2,
+ ssb_block_read(dev->dev, wl->rx_tail, 2,
q->mmio_base + B43_PIO_RXDATA,
sizeof(u16));
- skb->data[len + padding - 1] = tail[0];
+ skb->data[len + padding - 1] = wl->rx_tail[0];
}
}
- b43_rx(q->dev, skb, &rxhdr);
+ b43_rx(q->dev, skb, &wl->rxhdr);
return 1;
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff