ARM: dts: AM33XX: Add pinmux configuration for user-leds to BONE

Add pinmux configurations for gpio based user-keys to am335x-bone.
In this patch, only single named mode/state is added and these pins
are configured during pinctrl driver initialization.

Default mode is nothing but the values required for the module during
active state. With this configurations module is functional as
expected.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 91eee97371ea359b80be3d14895738082f013904..1aac58bfb4a0fb98831a31140c722c82b6939d84 100644 (file)
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -24,6 +24,20 @@
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
 
+       am33xx_pinmux: pinmux@44e10800 {
+               pinctrl-names = "default";
+               pinctrl-0 = <&user_leds_s0>;
+
+               user_leds_s0: user_leds_s0 {
+                       pinctrl-single,pins = <
+                               0x54 0x7        /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+                               0x58 0x17       /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+                               0x5c 0x7        /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+                               0x60 0x17       /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+                       >;
+               };
+       };
+
        ocp {
                uart1: serial@44e09000 {
                        status = "okay";