mfd: Add omap-usbhs runtime PM support

The usbhs core driver does not enable/disable the interface and
functional clocks; These clocks are handled by hwmod and runtime pm,
hence insted of the clock enable/disable, the runtime pm APIS are
used. however,the port clocks and tll clocks are handled
by the usbhs core.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 1717144fe7f4f220f6cd79ccea856f39f87ecac3..855219526ccb9ec390afe9e2a74b138b1b415f31 100644 (file)
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -26,6 +26,7 @@
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
 #include <plat/usb.h>
+#include <linux/pm_runtime.h>
 
 #define USBHS_DRIVER_NAME      "usbhs-omap"
 #define OMAP_EHCI_DEVICE       "ehci-omap"
@@ -146,9 +147,6 @@
 
 
 struct usbhs_hcd_omap {
-       struct clk                      *usbhost_ick;
-       struct clk                      *usbhost_hs_fck;
-       struct clk                      *usbhost_fs_fck;
        struct clk                      *xclk60mhsp1_ck;
        struct clk                      *xclk60mhsp2_ck;
        struct clk                      *utmi_p1_fck;
@@ -158,8 +156,6 @@ struct usbhs_hcd_omap {
        struct clk                      *usbhost_p2_fck;
        struct clk                      *usbtll_p2_fck;
        struct clk                      *init_60m_fclk;
-       struct clk                      *usbtll_fck;
-       struct clk                      *usbtll_ick;
 
        void __iomem                    *uhh_base;
        void __iomem                    *tll_base;
@@ -353,46 +349,13 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
        omap->platdata.ehci_data = pdata->ehci_data;
        omap->platdata.ohci_data = pdata->ohci_data;
 
-       omap->usbhost_ick = clk_get(dev, "usbhost_ick");
-       if (IS_ERR(omap->usbhost_ick)) {
-               ret =  PTR_ERR(omap->usbhost_ick);
-               dev_err(dev, "usbhost_ick failed error:%d\n", ret);
-               goto err_end;
-       }
-
-       omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
-       if (IS_ERR(omap->usbhost_hs_fck)) {
-               ret = PTR_ERR(omap->usbhost_hs_fck);
-               dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
-               goto err_usbhost_ick;
-       }
-
-       omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
-       if (IS_ERR(omap->usbhost_fs_fck)) {
-               ret = PTR_ERR(omap->usbhost_fs_fck);
-               dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
-               goto err_usbhost_hs_fck;
-       }
-
-       omap->usbtll_fck = clk_get(dev, "usbtll_fck");
-       if (IS_ERR(omap->usbtll_fck)) {
-               ret = PTR_ERR(omap->usbtll_fck);
-               dev_err(dev, "usbtll_fck failed error:%d\n", ret);
-               goto err_usbhost_fs_fck;
-       }
-
-       omap->usbtll_ick = clk_get(dev, "usbtll_ick");
-       if (IS_ERR(omap->usbtll_ick)) {
-               ret = PTR_ERR(omap->usbtll_ick);
-               dev_err(dev, "usbtll_ick failed error:%d\n", ret);
-               goto err_usbtll_fck;
-       }
+       pm_runtime_enable(&pdev->dev);
 
        omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
        if (IS_ERR(omap->utmi_p1_fck)) {
                ret = PTR_ERR(omap->utmi_p1_fck);
                dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
-               goto err_usbtll_ick;
+               goto err_end;
        }
 
        omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
@@ -522,22 +485,8 @@ err_xclk60mhsp1_ck:
 err_utmi_p1_fck:
        clk_put(omap->utmi_p1_fck);
 
-err_usbtll_ick:
-       clk_put(omap->usbtll_ick);
-
-err_usbtll_fck:
-       clk_put(omap->usbtll_fck);
-
-err_usbhost_fs_fck:
-       clk_put(omap->usbhost_fs_fck);
-
-err_usbhost_hs_fck:
-       clk_put(omap->usbhost_hs_fck);
-
-err_usbhost_ick:
-       clk_put(omap->usbhost_ick);
-
 err_end:
+       pm_runtime_disable(&pdev->dev);
        kfree(omap);
 
 end_probe:
@@ -571,11 +520,7 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev)
        clk_put(omap->utmi_p2_fck);
        clk_put(omap->xclk60mhsp1_ck);
        clk_put(omap->utmi_p1_fck);
-       clk_put(omap->usbtll_ick);
-       clk_put(omap->usbtll_fck);
-       clk_put(omap->usbhost_fs_fck);
-       clk_put(omap->usbhost_hs_fck);
-       clk_put(omap->usbhost_ick);
+       pm_runtime_disable(&pdev->dev);
        kfree(omap);
 
        return 0;
@@ -695,7 +640,6 @@ static int usbhs_enable(struct device *dev)
        struct usbhs_omap_platform_data *pdata = &omap->platdata;
        unsigned long                   flags = 0;
        int                             ret = 0;
-       unsigned long                   timeout;
        unsigned                        reg;
 
        dev_dbg(dev, "starting TI HSUSB Controller\n");
@@ -708,11 +652,7 @@ static int usbhs_enable(struct device *dev)
        if (omap->count > 0)
                goto end_count;
 
-       clk_enable(omap->usbhost_ick);
-       clk_enable(omap->usbhost_hs_fck);
-       clk_enable(omap->usbhost_fs_fck);
-       clk_enable(omap->usbtll_fck);
-       clk_enable(omap->usbtll_ick);
+       pm_runtime_get_sync(dev);
 
        if (pdata->ehci_data->phy_reset) {
                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
@@ -736,50 +676,6 @@ static int usbhs_enable(struct device *dev)
        omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
        dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
 
-       /* perform TLL soft reset, and wait until reset is complete */
-       usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
-                       OMAP_USBTLL_SYSCONFIG_SOFTRESET);
-
-       /* Wait for TLL reset to complete */
-       timeout = jiffies + msecs_to_jiffies(1000);
-       while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
-                       & OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
-               cpu_relax();
-
-               if (time_after(jiffies, timeout)) {
-                       dev_dbg(dev, "operation timed out\n");
-                       ret = -EINVAL;
-                       goto err_tll;
-               }
-       }
-
-       dev_dbg(dev, "TLL RESET DONE\n");
-
-       /* (1<<3) = no idle mode only for initial debugging */
-       usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
-                       OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
-                       OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
-                       OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
-
-       /* Put UHH in NoIdle/NoStandby mode */
-       reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
-       if (is_omap_usbhs_rev1(omap)) {
-               reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
-                               | OMAP_UHH_SYSCONFIG_SIDLEMODE
-                               | OMAP_UHH_SYSCONFIG_CACTIVITY
-                               | OMAP_UHH_SYSCONFIG_MIDLEMODE);
-               reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
-
-
-       } else if (is_omap_usbhs_rev2(omap)) {
-               reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
-               reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
-               reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
-               reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
-       }
-
-       usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
-
        reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
        /* setup ULPI bypass and burst configurations */
        reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
@@ -919,6 +815,8 @@ end_count:
        return 0;
 
 err_tll:
+       pm_runtime_put_sync(dev);
+       spin_unlock_irqrestore(&omap->lock, flags);
        if (pdata->ehci_data->phy_reset) {
                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
                        gpio_free(pdata->ehci_data->reset_gpio_port[0]);
@@ -926,13 +824,6 @@ err_tll:
                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
                        gpio_free(pdata->ehci_data->reset_gpio_port[1]);
        }
-
-       clk_disable(omap->usbtll_ick);
-       clk_disable(omap->usbtll_fck);
-       clk_disable(omap->usbhost_fs_fck);
-       clk_disable(omap->usbhost_hs_fck);
-       clk_disable(omap->usbhost_ick);
-       spin_unlock_irqrestore(&omap->lock, flags);
        return ret;
 }
 
@@ -1005,11 +896,7 @@ static void usbhs_disable(struct device *dev)
                clk_disable(omap->utmi_p1_fck);
        }
 
-       clk_disable(omap->usbtll_ick);
-       clk_disable(omap->usbtll_fck);
-       clk_disable(omap->usbhost_fs_fck);
-       clk_disable(omap->usbhost_hs_fck);
-       clk_disable(omap->usbhost_ick);
+       pm_runtime_put_sync(dev);
 
        /* The gpio_free migh sleep; so unlock the spinlock */
        spin_unlock_irqrestore(&omap->lock, flags);