Documentation: DT: vdma: update binding doc for AXI DMA

This patch updates the device-tree binding doc for
adding support for AXI DMA.
Also this patch differentiates required properties b/w
DMA and VDMA.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
index a86737c99f53af703a716c1383b3142fcb19fe80..3fb23fe8e503b3cf2d891f13406e8da993ff1bc6 100644 (file)
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt
@@ -3,20 +3,28 @@ It can be configured to have one channel or two channels. If configured
 as two channels, one is to transmit to the video device and another is
 to receive from the video device.
 
+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
 Required properties:
-- compatible: Should be "xlnx,axi-vdma-1.00.a"
+- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a"
 - #dma-cells: Should be <1>, see "dmas" property below
 - reg: Should contain VDMA registers location and length.
-- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
 - xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
 - dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
 - dma-channel child node: Should have at least one channel and can have up to
        two channels per device. This node specifies the properties of each
        DMA channel (see child node properties below).
 
+Required properties for VDMA:
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
+
 Optional properties:
 - xlnx,include-sg: Tells configured for Scatter-mode in
        the hardware.
+Optional properties for VDMA:
 - xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
        It takes following values:
        {1}, flush both channels
@@ -33,6 +41,7 @@ Required child node properties:
 Optional child node properties:
 - xlnx,include-dre: Tells hardware is configured for Data
        Realignment Engine.
+Optional child node properties for VDMA:
 - xlnx,genlock-mode: Tells Genlock synchronization is
        enabled/disabled in hardware.