*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pnp.h>
dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4;
if (hw_revision == 0xFF) {
- ene_warn("device seems to be disabled");
- ene_warn("send a mail to lirc-list@lists.sourceforge.net");
- ene_warn("please attach output of acpidump and dmidecode");
+ pr_warn("device seems to be disabled\n");
+ pr_warn("send a mail to lirc-list@lists.sourceforge.net\n");
+ pr_warn("please attach output of acpidump and dmidecode\n");
return -ENODEV;
}
- ene_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x",
- chip_major, chip_minor, old_ver, hw_revision);
+ pr_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
+ chip_major, chip_minor, old_ver, hw_revision);
- ene_notice("PLL freq = %d", dev->pll_freq);
+ pr_notice("PLL freq = %d\n", dev->pll_freq);
if (chip_major == 0x33) {
- ene_warn("chips 0x33xx aren't supported");
+ pr_warn("chips 0x33xx aren't supported\n");
return -ENODEV;
}
if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
dev->hw_revision = ENE_HW_C;
- ene_notice("KB3926C detected");
+ pr_notice("KB3926C detected\n");
} else if (old_ver == 0x24 && hw_revision == 0xC0) {
dev->hw_revision = ENE_HW_B;
- ene_notice("KB3926B detected");
+ pr_notice("KB3926B detected\n");
} else {
dev->hw_revision = ENE_HW_D;
- ene_notice("KB3926D or higher detected");
+ pr_notice("KB3926D or higher detected\n");
}
/* detect features hardware supports */
fw_reg1 = ene_read_reg(dev, ENE_FW1);
fw_reg2 = ene_read_reg(dev, ENE_FW2);
- ene_notice("Firmware regs: %02x %02x", fw_reg1, fw_reg2);
+ pr_notice("Firmware regs: %02x %02x\n", fw_reg1, fw_reg2);
dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A);
dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING);
if (dev->hw_learning_and_tx_capable)
dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT);
- ene_notice("Hardware features:");
+ pr_notice("Hardware features:\n");
if (dev->hw_learning_and_tx_capable) {
- ene_notice("* Supports transmitting & learning mode");
- ene_notice(" This feature is rare and therefore,");
- ene_notice(" you are welcome to test it,");
- ene_notice(" and/or contact the author via:");
- ene_notice(" lirc-list@lists.sourceforge.net");
- ene_notice(" or maximlevitsky@gmail.com");
+ pr_notice("* Supports transmitting & learning mode\n");
+ pr_notice(" This feature is rare and therefore,\n");
+ pr_notice(" you are welcome to test it,\n");
+ pr_notice(" and/or contact the author via:\n");
+ pr_notice(" lirc-list@lists.sourceforge.net\n");
+ pr_notice(" or maximlevitsky@gmail.com\n");
- ene_notice("* Uses GPIO %s for IR raw input",
- dev->hw_use_gpio_0a ? "40" : "0A");
+ pr_notice("* Uses GPIO %s for IR raw input\n",
+ dev->hw_use_gpio_0a ? "40" : "0A");
if (dev->hw_fan_input)
- ene_notice("* Uses unused fan feedback input as source"
- " of demodulated IR data");
+ pr_notice("* Uses unused fan feedback input as source of demodulated IR data\n");
}
if (!dev->hw_fan_input)
- ene_notice("* Uses GPIO %s for IR demodulated input",
- dev->hw_use_gpio_0a ? "0A" : "40");
+ pr_notice("* Uses GPIO %s for IR demodulated input\n",
+ dev->hw_use_gpio_0a ? "0A" : "40");
if (dev->hw_extra_buffer)
- ene_notice("* Uses new style input buffer");
+ pr_notice("* Uses new style input buffer\n");
return 0;
}
dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8;
- ene_notice("Hardware uses 2 extended buffers:");
- ene_notice(" 0x%04x - len : %d", dev->extra_buf1_address,
- dev->extra_buf1_len);
- ene_notice(" 0x%04x - len : %d", dev->extra_buf2_address,
- dev->extra_buf2_len);
+ pr_notice("Hardware uses 2 extended buffers:\n");
+ pr_notice(" 0x%04x - len : %d\n",
+ dev->extra_buf1_address, dev->extra_buf1_len);
+ pr_notice(" 0x%04x - len : %d\n",
+ dev->extra_buf2_address, dev->extra_buf2_len);
- ene_notice("Total buffer len = %d", dev->buffer_len);
+ pr_notice("Total buffer len = %d\n", dev->buffer_len);
if (dev->buffer_len > 64 || dev->buffer_len < 16)
goto error;
ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
return;
error:
- ene_warn("Error validating extra buffers, device probably won't work");
+ pr_warn("Error validating extra buffers, device probably won't work\n");
dev->hw_extra_buffer = false;
ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
}
dbg("TX: Transmitter #2 is connected");
if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN)))
- ene_warn("TX: transmitter cable isn't connected!");
+ pr_warn("TX: transmitter cable isn't connected!\n");
/* disable receive on revc */
if (dev->hw_revision == ENE_HW_C)
bool pulse = dev->tx_sample_pulse;
if (!dev->tx_buffer) {
- ene_warn("TX: BUG: attempt to transmit NULL buffer");
+ pr_warn("TX: BUG: attempt to transmit NULL buffer\n");
return;
}
dev->hw_learning_and_tx_capable = true;
setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
(long unsigned int)dev);
- ene_warn("Simulation of TX activated");
+ pr_warn("Simulation of TX activated\n");
}
if (!dev->hw_learning_and_tx_capable)
if (error < 0)
goto error;
- ene_notice("driver has been successfully loaded");
+ pr_notice("driver has been successfully loaded\n");
return 0;
error:
if (dev && dev->irq >= 0)