* Add ide_pio_cycle_time() helper.
* Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers
(previously cycle time given by the device was only used for "pio" == 255).
* Remove no longer needed ide_pio_data_t.cycle_time field.
v2:
* Fix "ata_" prefix (Noticed by Jeff).
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
return -1;
}
+unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
+{
+ struct hd_driveid *id = drive->id;
+ int cycle_time = 0;
+
+ if (id->field_valid & 2) {
+ if (id->capability & 8)
+ cycle_time = id->eide_pio_iordy;
+ else
+ cycle_time = id->eide_pio;
+ }
+
+ /* conservative "downgrade" for all pre-ATA2 drives */
+ if (pio < 3) {
+ if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time)
+ cycle_time = 0; /* use standard timing */
+ }
+
+ return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time;
+}
+
+EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
+
/**
* ide_get_best_pio_mode - get PIO mode from drive
* @drive: drive to consider
u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
{
int pio_mode;
- int cycle_time = 0;
struct hd_driveid* id = drive->id;
int overridden = 0;
}
if (id->field_valid & 2) { /* drive implements ATA2? */
if (id->capability & 8) { /* IORDY supported? */
- cycle_time = id->eide_pio_iordy;
if (id->eide_pio_modes & 7) {
overridden = 0;
if (id->eide_pio_modes & 4)
else
pio_mode = 3;
}
- } else {
- cycle_time = id->eide_pio;
}
}
pio_mode--;
printk(KERN_INFO "%s: applying conservative "
"PIO \"downgrade\"\n", drive->name);
- if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
- cycle_time = 0; /* use standard timing */
}
}
- if (pio_mode > max_mode) {
+
+ if (pio_mode > max_mode)
pio_mode = max_mode;
- cycle_time = 0;
- }
- if (d) {
+
+ if (d)
d->pio_mode = pio_mode;
- d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
- }
+
return pio_mode;
}
int time1, time2;
u8 param1, param2, param3, param4;
unsigned long flags;
- ide_pio_data_t d;
int bus_speed = system_bus_clock();
- pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, &d);
+ pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO, NULL);
/* calculate timing, according to PIO mode */
- time1 = d.cycle_time;
+ time1 = ide_pio_cycle_time(drive, pio);
time2 = ide_pio_timings[pio].active_time;
param3 = param1 = (time2 * bus_speed + 999) / 1000;
param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1;
{
int active_time, recovery_time;
int active_cycles, recovery_cycles;
- ide_pio_data_t d;
int bus_speed = system_bus_clock();
if (pio) {
- pio = ide_get_best_pio_mode(drive, pio, 5, &d);
-
+ unsigned int cycle_time;
+
+ pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ cycle_time = ide_pio_cycle_time(drive, pio);
+
/*
* Just like opti621.c we try to calculate the
* actual cycle time for recovery and activity
* according system bus speed.
*/
active_time = ide_pio_timings[pio].active_time;
- recovery_time = d.cycle_time
+ recovery_time = cycle_time
- active_time
- ide_pio_timings[pio].setup_time;
/*
static void qd6580_tune_drive (ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
int base = HWIF(drive)->select_data;
+ unsigned int cycle_time;
int active_time = 175;
int recovery_time = 415; /* worst case values from the dos driver */
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ cycle_time = ide_pio_cycle_time(drive, pio);
switch (pio) {
case 0: break;
case 3:
- if (d.cycle_time >= 110) {
+ if (cycle_time >= 110) {
active_time = 86;
- recovery_time = d.cycle_time - 102;
+ recovery_time = cycle_time - 102;
} else
printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
break;
case 4:
- if (d.cycle_time >= 69) {
+ if (cycle_time >= 69) {
active_time = 70;
- recovery_time = d.cycle_time - 61;
+ recovery_time = cycle_time - 61;
} else
printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
break;
default:
- if (d.cycle_time >= 180) {
+ if (cycle_time >= 180) {
active_time = 110;
- recovery_time = d.cycle_time - 120;
+ recovery_time = cycle_time - 120;
} else {
active_time = ide_pio_timings[pio].active_time;
- recovery_time = d.cycle_time
- -active_time;
+ recovery_time = cycle_time - active_time;
}
}
printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio);
*/
static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
{
+ unsigned int index = 0, cycle_time;
u8 b;
- ide_pio_data_t d;
- unsigned int index = 0;
while (drive != cmd_drives[index]) {
if (++index > 3) {
return;
}
- (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
- cmd640_set_mode (index, d.pio_mode, d.cycle_time);
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+ cycle_time = ide_pio_cycle_time(drive, mode_wanted);
+ cmd640_set_mode(index, mode_wanted, cycle_time);
printk("%s: selected cmd640 PIO mode%d (%dns)",
- drive->name,
- d.pio_mode,
- d.cycle_time);
+ drive->name, mode_wanted, cycle_time);
display_clocks(index);
}
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- ide_pio_data_t pio;
+ unsigned int cycle_time;
u8 pio_mode, setup_count, arttim = 0;
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, &pio);
+
+ pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5, NULL);
+ cycle_time = ide_pio_cycle_time(drive, pio_mode);
cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
- drive->name, mode_wanted, pio_mode, pio.cycle_time);
+ drive->name, mode_wanted, pio_mode, cycle_time);
- program_cycle_times(drive, pio.cycle_time,
+ program_cycle_times(drive, cycle_time,
ide_pio_timings[pio_mode].active_time);
setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time,
* Convert a PIO mode and cycle time to the required on/off times
* for the interface. This has protection against runaway timings.
*/
-static unsigned int get_pio_timings(ide_drive_t *drive, ide_pio_data_t *p)
+static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
{
unsigned int cmd_on, cmd_off;
u8 iordy = 0;
- cmd_on = (ide_pio_timings[p->pio_mode].active_time + 29) / 30;
- cmd_off = (p->cycle_time - 30 * cmd_on + 29) / 30;
+ cmd_on = (ide_pio_timings[pio].active_time + 29) / 30;
+ cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30;
if (cmd_on == 0)
cmd_on = 1;
if (cmd_off == 0)
cmd_off = 1;
- if (p->pio_mode > 2 || ide_dev_has_iordy(drive->id))
+ if (pio > 2 || ide_dev_has_iordy(drive->id))
iordy = 0x40;
return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
int reg = 0x44 + drive->dn * 4;
- ide_pio_data_t p;
u16 drv_ctrl;
DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
- pio = ide_get_best_pio_mode(drive, pio, 5, &p);
+ pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
- drv_ctrl = get_pio_timings(drive, &p);
+ drv_ctrl = get_pio_timings(drive, pio);
/*
* Store the PIO timings so that we can restore them
}
printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
- ide_xfer_verbose(pio + XFER_PIO_0), p.cycle_time, drv_ctrl);
+ ide_xfer_verbose(pio + XFER_PIO_0),
+ ide_pio_cycle_time(drive, pio), drv_ctrl);
return pio;
}
static void
pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
{
- ide_pio_data_t d;
u32 *timings;
unsigned accessTicks, recTicks;
unsigned accessTime, recTime;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
-
+ unsigned int cycle_time;
+
if (pmif == NULL)
return;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
- pio = ide_get_best_pio_mode(drive, pio, 4, &d);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ cycle_time = ide_pio_cycle_time(drive, pio);
switch (pmif->kind) {
case controller_sh_ata6: {
/* 133Mhz cell */
- u32 tr = kauai_lookup_timing(shasta_pio_timings, d.cycle_time);
+ u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
if (tr == 0)
return;
*timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
case controller_un_ata6:
case controller_k2_ata6: {
/* 100Mhz cell */
- u32 tr = kauai_lookup_timing(kauai_pio_timings, d.cycle_time);
+ u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
if (tr == 0)
return;
*timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
}
case controller_kl_ata4:
/* 66Mhz cell */
- recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ recTime = cycle_time - ide_pio_timings[pio].active_time
- ide_pio_timings[pio].setup_time;
recTime = max(recTime, 150U);
accessTime = ide_pio_timings[pio].active_time;
default: {
/* 33Mhz cell */
int ebit = 0;
- recTime = d.cycle_time - ide_pio_timings[pio].active_time
+ recTime = cycle_time - ide_pio_timings[pio].active_time
- ide_pio_timings[pio].setup_time;
recTime = max(recTime, 150U);
accessTime = ide_pio_timings[pio].active_time;
typedef struct ide_pio_data_s {
u8 pio_mode;
- unsigned int cycle_time;
} ide_pio_data_t;
+unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
extern const ide_pio_timings_t ide_pio_timings[6];