ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver
authorAndrew Lunn <andrew@lunn.ch>
Fri, 28 Dec 2012 14:08:49 +0000 (15:08 +0100)
committerArnd Bergmann <arnd@arndb.de>
Thu, 28 Feb 2013 17:57:12 +0000 (18:57 +0100)
Remove the C code and add a Device Tree node for gpio-poweroff.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
arch/arm/boot/dts/kirkwood-nsa310.dts
arch/arm/mach-kirkwood/board-nsa310.c

index 2dc1d0929e89d382508337b7758ca6d7de15a6c7..85cce36491da9e78fe8a1fc23547669e62c98680 100644 (file)
                };
        };
 
+       gpio_poweroff {
+               compatible = "gpio-poweroff";
+               gpios = <&gpio1 16 0>;
+       };
+
        regulators {
                compatible = "simple-bus";
                #address-cells = <1>;
index 891322b44633e9738f864e5f29bd0cfd80c2f1ba..cf2c78cf6513a31cc8f451e305234d6d057730d4 100644 (file)
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
 #include <mach/kirkwood.h>
 #include <linux/of.h>
 #include "common.h"
 #include "mpp.h"
 
-#define NSA310_GPIO_POWER_OFF          48
-
 static unsigned int nsa310_mpp_config[] __initdata = {
        MPP12_GPIO, /* led esata green */
        MPP13_GPIO, /* led esata red */
@@ -43,40 +40,10 @@ static struct i2c_board_info __initdata nsa310_i2c_info[] = {
        { I2C_BOARD_INFO("adt7476", 0x2e) },
 };
 
-static void nsa310_power_off(void)
-{
-       gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
-}
-
-static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
-                                      const char *label)
-{
-       int err;
-
-       err = gpio_request_one(gpio, flags, label);
-       if (err)
-               pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
-                       gpio, label, err);
-
-       return err;
-}
-
-static void __init nsa310_gpio_init(void)
-{
-       int err;
-
-       err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
-                                 "Power Off");
-       if (!err)
-               pm_power_off = nsa310_power_off;
-}
-
 void __init nsa310_init(void)
 {
        kirkwood_mpp_conf(nsa310_mpp_config);
 
-       nsa310_gpio_init();
-
        i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
 }