e1000e: do not ignore variables which get set a value
authorBruce Allan <bruce.w.allan@intel.com>
Sat, 5 Jan 2013 05:08:31 +0000 (05:08 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Sun, 27 Jan 2013 10:08:19 +0000 (02:08 -0800)
Static analysis with cppcheck has shown a few instances of a variable which
is assigned a value that is never used.  A number of these are the return
status of various driver function calls which should be passed back to the
caller of the current function.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/e1000e/80003es2lan.c
drivers/net/ethernet/intel/e1000e/82571.c
drivers/net/ethernet/intel/e1000e/ich8lan.c
drivers/net/ethernet/intel/e1000e/phy.c

index a2b5b44cfe2b114de23e968abb886c528761b8bb..aa5e4cf90a58a773c4437750952f0dee5a107cd7 100644 (file)
@@ -773,6 +773,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
        ctrl = er32(CTRL);
 
        ret_val = e1000_acquire_phy_80003es2lan(hw);
+       if (ret_val)
+               return ret_val;
+
        e_dbg("Issuing a global reset to MAC\n");
        ew32(CTRL, ctrl | E1000_CTRL_RST);
        e1000_release_phy_80003es2lan(hw);
@@ -832,6 +835,8 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 
        /* Setup link and flow control */
        ret_val = mac->ops.setup_link(hw);
+       if (ret_val)
+               return ret_val;
 
        /* Disable IBIST slave mode (far-end loopback) */
        e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
index c2c23d26f440e59ec8b62f6f56291ca29fb348ec..d48143fefbfeed5e94aee474ee8438f938e8bea2 100644 (file)
@@ -554,16 +554,14 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
        s32 i = 0;
 
        extcnf_ctrl = er32(EXTCNF_CTRL);
-       extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
        do {
+               extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
                ew32(EXTCNF_CTRL, extcnf_ctrl);
                extcnf_ctrl = er32(EXTCNF_CTRL);
 
                if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
                        break;
 
-               extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
-
                usleep_range(2000, 4000);
                i++;
        } while (i < MDIO_OWNERSHIP_TIMEOUT);
@@ -935,6 +933,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
 
                /* When LPLU is enabled, we should disable SmartSpeed */
                ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+               if (ret_val)
+                       return ret_val;
                data &= ~IGP01E1000_PSCFR_SMART_SPEED;
                ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
                if (ret_val)
@@ -1797,6 +1797,8 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
                        if (ret_val)
                                return ret_val;
                        ret_val = e1000e_update_nvm_checksum(hw);
+                       if (ret_val)
+                               return ret_val;
                }
        }
 
index 3795ac6dae229b212559b37e369d638463c9b713..13f8fa0984e858b24edd90b8685a9a25d57caf71 100644 (file)
@@ -2342,6 +2342,8 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 
                /* When LPLU is enabled, we should disable SmartSpeed */
                ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+               if (ret_val)
+                       return ret_val;
                data &= ~IGP01E1000_PSCFR_SMART_SPEED;
                ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
                if (ret_val)
@@ -4053,8 +4055,7 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
        if (ret_val)
                return;
        reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
-       ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
-                                      reg_data);
+       e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET, reg_data);
 }
 
 /**
index 3b9712134409c4f3e5f592544e2e7897c25e00d4..b4aaf69f44106bf55e49d297ab904c4dd1c463a3 100644 (file)
@@ -3332,7 +3332,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
                 I82577_DSTATUS_CABLE_LENGTH_SHIFT;
 
        if (length == E1000_CABLE_LENGTH_UNDEFINED)
-               ret_val = -E1000_ERR_PHY;
+               return -E1000_ERR_PHY;
 
        phy->cable_length = length;