m68knommu: platform setup for 520x ColdFire parts
authorGreg Ungerer <gerg@snapgear.com>
Fri, 1 Feb 2008 07:34:10 +0000 (17:34 +1000)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 1 Feb 2008 09:54:03 +0000 (20:54 +1100)
Switch to platform style configuration for 520x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/m68knommu/platform/520x/config.c

index 6edbd41261cc0253fd48f19646614f632543d335..06d887cdcbfbcc2c8aaf441a5f2e5a1e8c5bcd1f 100644 (file)
@@ -5,7 +5,7 @@
  *
  *  Copyright (C) 2005,      Freescale (www.freescale.com)
  *  Copyright (C) 2005,      Intec Automation (mike@steroidmicros.com)
- *  Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
  *  Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
  */
 
 
 #include <linux/kernel.h>
 #include <linux/param.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <asm/machdep.h>
-#include <asm/dma.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
 
 /***************************************************************************/
 
-/*
- *     DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+void coldfire_reset(void);
 
 /***************************************************************************/
 
-void coldfire_reset(void);
+static struct mcf_platform_uart m520x_uart_platform[] = {
+       {
+               .mapbase        = MCF_MBAR + MCFUART_BASE1,
+               .irq            = MCFINT_VECBASE + MCFINT_UART0,
+       },
+       {
+               .mapbase        = MCF_MBAR + MCFUART_BASE2,
+               .irq            = MCFINT_VECBASE + MCFINT_UART1,
+       },
+       {
+               .mapbase        = MCF_MBAR + MCFUART_BASE3,
+               .irq            = MCFINT_VECBASE + MCFINT_UART2,
+       },
+       { },
+};
+
+static struct platform_device m520x_uart = {
+       .name                   = "mcfuart",
+       .id                     = 0,
+       .dev.platform_data      = m520x_uart_platform,
+};
+
+static struct platform_device *m520x_devices[] __initdata = {
+       &m520x_uart,
+};
+
+/***************************************************************************/
+
+#define        INTC0   (MCF_MBAR + MCFICM_INTC0)
+
+static void __init m520x_uart_init_line(int line, int irq)
+{
+       u32 imr;
+       u16 par;
+       u8 par2;
+
+       writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
+
+       imr = readl(INTC0 + MCFINTC_IMRL);
+       imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
+       writel(imr, INTC0 + MCFINTC_IMRL);
+
+       switch (line) {
+       case 0:
+               par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+               par |= MCF_GPIO_PAR_UART_PAR_UTXD0 |
+                      MCF_GPIO_PAR_UART_PAR_URXD0;
+               writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+               break;
+       case 1:
+               par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+               par |= MCF_GPIO_PAR_UART_PAR_UTXD1 |
+                      MCF_GPIO_PAR_UART_PAR_URXD1;
+               writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+               break;
+       case 2:
+               par2 = readb(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+               par2 &= ~0x0F;
+               par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
+                       MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+               writeb(par2, MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+               break;
+       }
+}
+
+static void __init m520x_uarts_init(void)
+{
+       const int nrlines = ARRAY_SIZE(m520x_uart_platform);
+       int line;
+
+       for (line = 0; (line < nrlines); line++)
+               m520x_uart_init_line(line, m520x_uart_platform[line].irq);
+}
 
 /***************************************************************************/
 
@@ -42,9 +114,20 @@ void mcf_autovector(unsigned int vec)
 
 /***************************************************************************/
 
-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
 {
        mach_reset = coldfire_reset;
+       m520x_uarts_init();
 }
 
 /***************************************************************************/
+
+static int __init init_BSP(void)
+{
+       platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices));
+       return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/