serial: rp2: New driver for Comtrol RocketPort 2 cards
authorKevin Cernekee <cernekee@gmail.com>
Thu, 17 Jan 2013 04:28:40 +0000 (20:28 -0800)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 18 Jan 2013 01:28:39 +0000 (17:28 -0800)
This driver supports the RocketPort EXPRESS and RocketPort INFINITY
families of PCI/PCIe multiport serial adapters.  These adapters use a
"RocketPort 2" ASIC that is not compatible with the original RocketPort
driver (CONFIG_ROCKETPORT).

Tested with the RocketPort EXPRESS Octa DB9 and Quad DB9.  Also added an
old RocketPort 8J PCI card to the same system to verify that rocket.c and
rp2.c coexist peacefully.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/Kconfig
drivers/tty/serial/Makefile
drivers/tty/serial/rp2.c [new file with mode: 0644]
include/uapi/linux/serial_core.h

index aff3cd356662d82c00bd4893b85a5a5b9200a48e..2dc429357fe370922fb203a1dcfda82870ef415e 100644 (file)
@@ -1458,4 +1458,28 @@ config SERIAL_ARC_NR_PORTS
          Set this to the number of serial ports you want the driver
          to support.
 
+config SERIAL_RP2
+       tristate "Comtrol RocketPort EXPRESS/INFINITY support"
+       depends on PCI
+       select SERIAL_CORE
+       help
+         This driver supports the Comtrol RocketPort EXPRESS and
+         RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
+         These adapters use a "RocketPort 2" ASIC that is not compatible
+         with the original RocketPort driver (CONFIG_ROCKETPORT).
+
+         To compile this driver as a module, choose M here: the
+         module will be called rp2.
+
+         If you want to compile this driver into the kernel, say Y here.  If
+         you don't have a suitable RocketPort card installed, say N.
+
+config SERIAL_RP2_NR_UARTS
+       int "Maximum number of RocketPort EXPRESS/INFINITY ports"
+       depends on SERIAL_RP2
+       default "32"
+       help
+         If multiple cards are present, the default limit of 32 ports may
+         need to be increased.
+
 endmenu
index 82e4306bf962401edcab6937dd25529933776af7..eedfec40e3dda242220cf1dc73b9ec1787c63cee 100644 (file)
@@ -84,3 +84,4 @@ obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
 obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
 obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
 obj-$(CONFIG_SERIAL_ARC)       += arc_uart.o
+obj-$(CONFIG_SERIAL_RP2)       += rp2.o
diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c
new file mode 100644 (file)
index 0000000..a314a94
--- /dev/null
@@ -0,0 +1,885 @@
+/*
+ * Driver for Comtrol RocketPort EXPRESS/INFINITY cards
+ *
+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+ *
+ * Inspired by, and loosely based on:
+ *
+ *   ar933x_uart.c
+ *     Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *   rocketport_infinity_express-linux-1.20.tar.gz
+ *     Copyright (C) 2004-2011 Comtrol, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/completion.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/types.h>
+
+#define DRV_NAME                       "rp2"
+
+#define RP2_FW_NAME                    "rp2.fw"
+#define RP2_UCODE_BYTES                        0x3f
+
+#define PORTS_PER_ASIC                 16
+#define ALL_PORTS_MASK                 (BIT(PORTS_PER_ASIC) - 1)
+
+#define UART_CLOCK                     44236800
+#define DEFAULT_BAUD_DIV               (UART_CLOCK / (9600 * 16))
+#define FIFO_SIZE                      512
+
+/* BAR0 registers */
+#define RP2_FPGA_CTL0                  0x110
+#define RP2_FPGA_CTL1                  0x11c
+#define RP2_IRQ_MASK                   0x1ec
+#define RP2_IRQ_MASK_EN_m              BIT(0)
+#define RP2_IRQ_STATUS                 0x1f0
+
+/* BAR1 registers */
+#define RP2_ASIC_SPACING               0x1000
+#define RP2_ASIC_OFFSET(i)             ((i) << ilog2(RP2_ASIC_SPACING))
+
+#define RP2_PORT_BASE                  0x000
+#define RP2_PORT_SPACING               0x040
+
+#define RP2_UCODE_BASE                 0x400
+#define RP2_UCODE_SPACING              0x80
+
+#define RP2_CLK_PRESCALER              0xc00
+#define RP2_CH_IRQ_STAT                        0xc04
+#define RP2_CH_IRQ_MASK                        0xc08
+#define RP2_ASIC_IRQ                   0xd00
+#define RP2_ASIC_IRQ_EN_m              BIT(20)
+#define RP2_GLOBAL_CMD                 0xd0c
+#define RP2_ASIC_CFG                   0xd04
+
+/* port registers */
+#define RP2_DATA_DWORD                 0x000
+
+#define RP2_DATA_BYTE                  0x008
+#define RP2_DATA_BYTE_ERR_PARITY_m     BIT(8)
+#define RP2_DATA_BYTE_ERR_OVERRUN_m    BIT(9)
+#define RP2_DATA_BYTE_ERR_FRAMING_m    BIT(10)
+#define RP2_DATA_BYTE_BREAK_m          BIT(11)
+
+/* This lets uart_insert_char() drop bytes received on a !CREAD port */
+#define RP2_DUMMY_READ                 BIT(16)
+
+#define RP2_DATA_BYTE_EXCEPTION_MASK   (RP2_DATA_BYTE_ERR_PARITY_m | \
+                                        RP2_DATA_BYTE_ERR_OVERRUN_m | \
+                                        RP2_DATA_BYTE_ERR_FRAMING_m | \
+                                        RP2_DATA_BYTE_BREAK_m)
+
+#define RP2_RX_FIFO_COUNT              0x00c
+#define RP2_TX_FIFO_COUNT              0x00e
+
+#define RP2_CHAN_STAT                  0x010
+#define RP2_CHAN_STAT_RXDATA_m         BIT(0)
+#define RP2_CHAN_STAT_DCD_m            BIT(3)
+#define RP2_CHAN_STAT_DSR_m            BIT(4)
+#define RP2_CHAN_STAT_CTS_m            BIT(5)
+#define RP2_CHAN_STAT_RI_m             BIT(6)
+#define RP2_CHAN_STAT_OVERRUN_m                BIT(13)
+#define RP2_CHAN_STAT_DSR_CHANGED_m    BIT(16)
+#define RP2_CHAN_STAT_CTS_CHANGED_m    BIT(17)
+#define RP2_CHAN_STAT_CD_CHANGED_m     BIT(18)
+#define RP2_CHAN_STAT_RI_CHANGED_m     BIT(22)
+#define RP2_CHAN_STAT_TXEMPTY_m                BIT(25)
+
+#define RP2_CHAN_STAT_MS_CHANGED_MASK  (RP2_CHAN_STAT_DSR_CHANGED_m | \
+                                        RP2_CHAN_STAT_CTS_CHANGED_m | \
+                                        RP2_CHAN_STAT_CD_CHANGED_m | \
+                                        RP2_CHAN_STAT_RI_CHANGED_m)
+
+#define RP2_TXRX_CTL                   0x014
+#define RP2_TXRX_CTL_MSRIRQ_m          BIT(0)
+#define RP2_TXRX_CTL_RXIRQ_m           BIT(2)
+#define RP2_TXRX_CTL_RX_TRIG_s         3
+#define RP2_TXRX_CTL_RX_TRIG_m         (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_RX_TRIG_1         (0x1 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_RX_TRIG_256       (0x2 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_RX_TRIG_448       (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_RX_EN_m           BIT(5)
+#define RP2_TXRX_CTL_RTSFLOW_m         BIT(6)
+#define RP2_TXRX_CTL_DTRFLOW_m         BIT(7)
+#define RP2_TXRX_CTL_TX_TRIG_s         16
+#define RP2_TXRX_CTL_TX_TRIG_m         (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
+#define RP2_TXRX_CTL_DSRFLOW_m         BIT(18)
+#define RP2_TXRX_CTL_TXIRQ_m           BIT(19)
+#define RP2_TXRX_CTL_CTSFLOW_m         BIT(23)
+#define RP2_TXRX_CTL_TX_EN_m           BIT(24)
+#define RP2_TXRX_CTL_RTS_m             BIT(25)
+#define RP2_TXRX_CTL_DTR_m             BIT(26)
+#define RP2_TXRX_CTL_LOOP_m            BIT(27)
+#define RP2_TXRX_CTL_BREAK_m           BIT(28)
+#define RP2_TXRX_CTL_CMSPAR_m          BIT(29)
+#define RP2_TXRX_CTL_nPARODD_m         BIT(30)
+#define RP2_TXRX_CTL_PARENB_m          BIT(31)
+
+#define RP2_UART_CTL                   0x018
+#define RP2_UART_CTL_MODE_s            0
+#define RP2_UART_CTL_MODE_m            (0x7 << RP2_UART_CTL_MODE_s)
+#define RP2_UART_CTL_MODE_rs232                (0x1 << RP2_UART_CTL_MODE_s)
+#define RP2_UART_CTL_FLUSH_RX_m                BIT(3)
+#define RP2_UART_CTL_FLUSH_TX_m                BIT(4)
+#define RP2_UART_CTL_RESET_CH_m                BIT(5)
+#define RP2_UART_CTL_XMIT_EN_m         BIT(6)
+#define RP2_UART_CTL_DATABITS_s                8
+#define RP2_UART_CTL_DATABITS_m                (0x3 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_DATABITS_8                (0x3 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_DATABITS_7                (0x2 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_DATABITS_6                (0x1 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_DATABITS_5                (0x0 << RP2_UART_CTL_DATABITS_s)
+#define RP2_UART_CTL_STOPBITS_m                BIT(10)
+
+#define RP2_BAUD                       0x01c
+
+/* ucode registers */
+#define RP2_TX_SWFLOW                  0x02
+#define RP2_TX_SWFLOW_ena              0x81
+#define RP2_TX_SWFLOW_dis              0x9d
+
+#define RP2_RX_SWFLOW                  0x0c
+#define RP2_RX_SWFLOW_ena              0x81
+#define RP2_RX_SWFLOW_dis              0x8d
+
+#define RP2_RX_FIFO                    0x37
+#define RP2_RX_FIFO_ena                        0x08
+#define RP2_RX_FIFO_dis                        0x81
+
+static struct uart_driver rp2_uart_driver = {
+       .owner                          = THIS_MODULE,
+       .driver_name                    = DRV_NAME,
+       .dev_name                       = "ttyRP",
+       .nr                             = CONFIG_SERIAL_RP2_NR_UARTS,
+};
+
+struct rp2_card;
+
+struct rp2_uart_port {
+       struct uart_port                port;
+       int                             idx;
+       int                             ignore_rx;
+       struct rp2_card                 *card;
+       void __iomem                    *asic_base;
+       void __iomem                    *base;
+       void __iomem                    *ucode;
+};
+
+struct rp2_card {
+       struct pci_dev                  *pdev;
+       struct rp2_uart_port            *ports;
+       int                             n_ports;
+       int                             initialized_ports;
+       int                             minor_start;
+       int                             smpte;
+       void __iomem                    *bar0;
+       void __iomem                    *bar1;
+       spinlock_t                      card_lock;
+       struct completion               fw_loaded;
+};
+
+#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
+#define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0))
+
+static inline void rp2_decode_cap(const struct pci_device_id *id,
+                                 int *ports, int *smpte)
+{
+       *ports = id->driver_data >> 8;
+       *smpte = id->driver_data & 0xff;
+}
+
+static DEFINE_SPINLOCK(rp2_minor_lock);
+static int rp2_minor_next;
+
+static int rp2_alloc_ports(int n_ports)
+{
+       int ret = -ENOSPC;
+
+       spin_lock(&rp2_minor_lock);
+       if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) {
+               /* sorry, no support for hot unplugging individual cards */
+               ret = rp2_minor_next;
+               rp2_minor_next += n_ports;
+       }
+       spin_unlock(&rp2_minor_lock);
+
+       return ret;
+}
+
+static inline struct rp2_uart_port *port_to_up(struct uart_port *port)
+{
+       return container_of(port, struct rp2_uart_port, port);
+}
+
+static void rp2_rmw(struct rp2_uart_port *up, int reg,
+                   u32 clr_bits, u32 set_bits)
+{
+       u32 tmp = readl(up->base + reg);
+       tmp &= ~clr_bits;
+       tmp |= set_bits;
+       writel(tmp, up->base + reg);
+}
+
+static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val)
+{
+       rp2_rmw(up, reg, val, 0);
+}
+
+static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val)
+{
+       rp2_rmw(up, reg, 0, val);
+}
+
+static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num,
+                           int is_enabled)
+{
+       unsigned long flags, irq_mask;
+
+       spin_lock_irqsave(&up->card->card_lock, flags);
+
+       irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK);
+       if (is_enabled)
+               irq_mask &= ~BIT(ch_num);
+       else
+               irq_mask |= BIT(ch_num);
+       writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK);
+
+       spin_unlock_irqrestore(&up->card->card_lock, flags);
+}
+
+static unsigned int rp2_uart_tx_empty(struct uart_port *port)
+{
+       struct rp2_uart_port *up = port_to_up(port);
+       unsigned long tx_fifo_bytes, flags;
+
+       /*
+        * This should probably check the transmitter, not the FIFO.
+        * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is
+        * enabled.
+        */
+       spin_lock_irqsave(&up->port.lock, flags);
+       tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT);
+       spin_unlock_irqrestore(&up->port.lock, flags);
+
+       return tx_fifo_bytes ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int rp2_uart_get_mctrl(struct uart_port *port)
+{
+       struct rp2_uart_port *up = port_to_up(port);
+       u32 status;
+
+       status = readl(up->base + RP2_CHAN_STAT);
+       return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) |
+              ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) |
+              ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) |
+              ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0);
+}
+
+static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+       rp2_rmw(port_to_up(port), RP2_TXRX_CTL,
+               RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m,
+               ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) |
+               ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) |
+               ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0));
+}
+
+static void rp2_uart_start_tx(struct uart_port *port)
+{
+       rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
+}
+
+static void rp2_uart_stop_tx(struct uart_port *port)
+{
+       rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
+}
+
+static void rp2_uart_stop_rx(struct uart_port *port)
+{
+       rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m);
+}
+
+static void rp2_uart_break_ctl(struct uart_port *port, int break_state)
+{
+       unsigned long flags;
+
+       spin_lock_irqsave(&port->lock, flags);
+       rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m,
+               break_state ? RP2_TXRX_CTL_BREAK_m : 0);
+       spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void rp2_uart_enable_ms(struct uart_port *port)
+{
+       rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m);
+}
+
+static void __rp2_uart_set_termios(struct rp2_uart_port *up,
+                                  unsigned long cfl,
+                                  unsigned long ifl,
+                                  unsigned int baud_div)
+{
+       /* baud rate divisor (calculated elsewhere).  0 = divide-by-1 */
+       writew(baud_div - 1, up->base + RP2_BAUD);
+
+       /* data bits and stop bits */
+       rp2_rmw(up, RP2_UART_CTL,
+               RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m,
+               ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) |
+               (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) |
+               (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) |
+               (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) |
+               (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0));
+
+       /* parity and hardware flow control */
+       rp2_rmw(up, RP2_TXRX_CTL,
+               RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m |
+               RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m |
+               RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m |
+               RP2_TXRX_CTL_CTSFLOW_m,
+               ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) |
+               ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) |
+               ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) |
+               ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m |
+                                   RP2_TXRX_CTL_CTSFLOW_m) : 0));
+
+       /* XON/XOFF software flow control */
+       writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis,
+              up->ucode + RP2_TX_SWFLOW);
+       writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis,
+              up->ucode + RP2_RX_SWFLOW);
+}
+
+static void rp2_uart_set_termios(struct uart_port *port,
+                                struct ktermios *new,
+                                struct ktermios *old)
+{
+       struct rp2_uart_port *up = port_to_up(port);
+       unsigned long flags;
+       unsigned int baud, baud_div;
+
+       baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+       baud_div = uart_get_divisor(port, baud);
+
+       if (tty_termios_baud_rate(new))
+               tty_termios_encode_baud_rate(new, baud, baud);
+
+       spin_lock_irqsave(&port->lock, flags);
+
+       /* ignore all characters if CREAD is not set */
+       port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ;
+
+       __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div);
+       uart_update_timeout(port, new->c_cflag, baud);
+
+       spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void rp2_rx_chars(struct rp2_uart_port *up)
+{
+       u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT);
+       struct tty_port *port = &up->port.state->port;
+
+       for (; bytes != 0; bytes--) {
+               u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ;
+               char ch = byte & 0xff;
+
+               if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) {
+                       if (!uart_handle_sysrq_char(&up->port, ch))
+                               uart_insert_char(&up->port, byte, 0, ch,
+                                                TTY_NORMAL);
+               } else {
+                       char flag = TTY_NORMAL;
+
+                       if (byte & RP2_DATA_BYTE_BREAK_m)
+                               flag = TTY_BREAK;
+                       else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m)
+                               flag = TTY_FRAME;
+                       else if (byte & RP2_DATA_BYTE_ERR_PARITY_m)
+                               flag = TTY_PARITY;
+                       uart_insert_char(&up->port, byte,
+                                        RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag);
+               }
+               up->port.icount.rx++;
+       }
+
+       tty_flip_buffer_push(port);
+}
+
+static void rp2_tx_chars(struct rp2_uart_port *up)
+{
+       u16 max_tx = FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT);
+       struct circ_buf *xmit = &up->port.state->xmit;
+
+       if (uart_tx_stopped(&up->port)) {
+               rp2_uart_stop_tx(&up->port);
+               return;
+       }
+
+       for (; max_tx != 0; max_tx--) {
+               if (up->port.x_char) {
+                       writeb(up->port.x_char, up->base + RP2_DATA_BYTE);
+                       up->port.x_char = 0;
+                       up->port.icount.tx++;
+                       continue;
+               }
+               if (uart_circ_empty(xmit)) {
+                       rp2_uart_stop_tx(&up->port);
+                       break;
+               }
+               writeb(xmit->buf[xmit->tail], up->base + RP2_DATA_BYTE);
+               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+               up->port.icount.tx++;
+       }
+
+       if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+               uart_write_wakeup(&up->port);
+}
+
+static void rp2_ch_interrupt(struct rp2_uart_port *up)
+{
+       u32 status;
+
+       spin_lock(&up->port.lock);
+
+       /*
+        * The IRQ status bits are clear-on-write.  Other status bits in
+        * this register aren't, so it's harmless to write to them.
+        */
+       status = readl(up->base + RP2_CHAN_STAT);
+       writel(status, up->base + RP2_CHAN_STAT);
+
+       if (status & RP2_CHAN_STAT_RXDATA_m)
+               rp2_rx_chars(up);
+       if (status & RP2_CHAN_STAT_TXEMPTY_m)
+               rp2_tx_chars(up);
+       if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
+               wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+
+       spin_unlock(&up->port.lock);
+}
+
+static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id)
+{
+       void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
+       int ch, handled = 0;
+       unsigned long status = readl(base + RP2_CH_IRQ_STAT) &
+                              ~readl(base + RP2_CH_IRQ_MASK);
+
+       for_each_set_bit(ch, &status, PORTS_PER_ASIC) {
+               rp2_ch_interrupt(&card->ports[ch]);
+               handled++;
+       }
+       return handled;
+}
+
+static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id)
+{
+       struct rp2_card *card = dev_id;
+       int handled;
+
+       handled = rp2_asic_interrupt(card, 0);
+       if (card->n_ports >= PORTS_PER_ASIC)
+               handled += rp2_asic_interrupt(card, 1);
+
+       return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static inline void rp2_flush_fifos(struct rp2_uart_port *up)
+{
+       rp2_rmw_set(up, RP2_UART_CTL,
+                   RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
+       readl(up->base + RP2_UART_CTL);
+       udelay(10);
+       rp2_rmw_clr(up, RP2_UART_CTL,
+                   RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
+}
+
+static int rp2_uart_startup(struct uart_port *port)
+{
+       struct rp2_uart_port *up = port_to_up(port);
+
+       rp2_flush_fifos(up);
+       rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m);
+       rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m,
+               RP2_TXRX_CTL_RX_TRIG_1);
+       rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
+       rp2_mask_ch_irq(up, up->idx, 1);
+
+       return 0;
+}
+
+static void rp2_uart_shutdown(struct uart_port *port)
+{
+       struct rp2_uart_port *up = port_to_up(port);
+       unsigned long flags;
+
+       rp2_uart_break_ctl(port, 0);
+
+       spin_lock_irqsave(&port->lock, flags);
+       rp2_mask_ch_irq(up, up->idx, 0);
+       rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
+       spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *rp2_uart_type(struct uart_port *port)
+{
+       return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL;
+}
+
+static void rp2_uart_release_port(struct uart_port *port)
+{
+       /* Nothing to release ... */
+}
+
+static int rp2_uart_request_port(struct uart_port *port)
+{
+       /* UARTs always present */
+       return 0;
+}
+
+static void rp2_uart_config_port(struct uart_port *port, int flags)
+{
+       if (flags & UART_CONFIG_TYPE)
+               port->type = PORT_RP2;
+}
+
+static int rp2_uart_verify_port(struct uart_port *port,
+                                  struct serial_struct *ser)
+{
+       if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2)
+               return -EINVAL;
+
+       return 0;
+}
+
+static const struct uart_ops rp2_uart_ops = {
+       .tx_empty       = rp2_uart_tx_empty,
+       .set_mctrl      = rp2_uart_set_mctrl,
+       .get_mctrl      = rp2_uart_get_mctrl,
+       .stop_tx        = rp2_uart_stop_tx,
+       .start_tx       = rp2_uart_start_tx,
+       .stop_rx        = rp2_uart_stop_rx,
+       .enable_ms      = rp2_uart_enable_ms,
+       .break_ctl      = rp2_uart_break_ctl,
+       .startup        = rp2_uart_startup,
+       .shutdown       = rp2_uart_shutdown,
+       .set_termios    = rp2_uart_set_termios,
+       .type           = rp2_uart_type,
+       .release_port   = rp2_uart_release_port,
+       .request_port   = rp2_uart_request_port,
+       .config_port    = rp2_uart_config_port,
+       .verify_port    = rp2_uart_verify_port,
+};
+
+static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id)
+{
+       void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
+       u32 clk_cfg;
+
+       writew(1, base + RP2_GLOBAL_CMD);
+       readw(base + RP2_GLOBAL_CMD);
+       msleep(100);
+       writel(0, base + RP2_CLK_PRESCALER);
+
+       /* TDM clock configuration */
+       clk_cfg = readw(base + RP2_ASIC_CFG);
+       clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9);
+       writew(clk_cfg, base + RP2_ASIC_CFG);
+
+       /* IRQ routing */
+       writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK);
+       writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ);
+}
+
+static void rp2_init_card(struct rp2_card *card)
+{
+       writel(4, card->bar0 + RP2_FPGA_CTL0);
+       writel(0, card->bar0 + RP2_FPGA_CTL1);
+
+       rp2_reset_asic(card, 0);
+       if (card->n_ports >= PORTS_PER_ASIC)
+               rp2_reset_asic(card, 1);
+
+       writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK);
+}
+
+static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw)
+{
+       int i;
+
+       writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL);
+       readl(up->base + RP2_UART_CTL);
+       udelay(1);
+
+       writel(0, up->base + RP2_TXRX_CTL);
+       writel(0, up->base + RP2_UART_CTL);
+       readl(up->base + RP2_UART_CTL);
+       udelay(1);
+
+       rp2_flush_fifos(up);
+
+       for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++)
+               writeb(fw->data[i], up->ucode + i);
+
+       __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV);
+       rp2_uart_set_mctrl(&up->port, 0);
+
+       writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO);
+       rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m,
+               RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232);
+       rp2_rmw_set(up, RP2_TXRX_CTL,
+                   RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m);
+}
+
+static void rp2_remove_ports(struct rp2_card *card)
+{
+       int i;
+
+       for (i = 0; i < card->initialized_ports; i++)
+               uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port);
+       card->initialized_ports = 0;
+}
+
+static void rp2_fw_cb(const struct firmware *fw, void *context)
+{
+       struct rp2_card *card = context;
+       resource_size_t phys_base;
+       int i, rc = -ENOENT;
+
+       if (!fw) {
+               dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
+                       RP2_FW_NAME);
+               goto no_fw;
+       }
+
+       phys_base = pci_resource_start(card->pdev, 1);
+
+       for (i = 0; i < card->n_ports; i++) {
+               struct rp2_uart_port *rp = &card->ports[i];
+               struct uart_port *p;
+               int j = (unsigned)i % PORTS_PER_ASIC;
+
+               rp->asic_base = card->bar1;
+               rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING;
+               rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING;
+               rp->card = card;
+               rp->idx = j;
+
+               p = &rp->port;
+               p->line = card->minor_start + i;
+               p->dev = &card->pdev->dev;
+               p->type = PORT_RP2;
+               p->iotype = UPIO_MEM32;
+               p->uartclk = UART_CLOCK;
+               p->regshift = 2;
+               p->fifosize = FIFO_SIZE;
+               p->ops = &rp2_uart_ops;
+               p->irq = card->pdev->irq;
+               p->membase = rp->base;
+               p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING;
+
+               if (i >= PORTS_PER_ASIC) {
+                       rp->asic_base += RP2_ASIC_SPACING;
+                       rp->base += RP2_ASIC_SPACING;
+                       rp->ucode += RP2_ASIC_SPACING;
+                       p->mapbase += RP2_ASIC_SPACING;
+               }
+
+               rp2_init_port(rp, fw);
+               rc = uart_add_one_port(&rp2_uart_driver, p);
+               if (rc) {
+                       dev_err(&card->pdev->dev,
+                               "error registering port %d: %d\n", i, rc);
+                       rp2_remove_ports(card);
+                       break;
+               }
+               card->initialized_ports++;
+       }
+
+       release_firmware(fw);
+no_fw:
+       /*
+        * rp2_fw_cb() is called from a workqueue long after rp2_probe()
+        * has already returned success.  So if something failed here,
+        * we'll just leave the now-dormant device in place until somebody
+        * unbinds it.
+        */
+       if (rc)
+               dev_warn(&card->pdev->dev, "driver initialization failed\n");
+
+       complete(&card->fw_loaded);
+}
+
+static int rp2_probe(struct pci_dev *pdev,
+                                  const struct pci_device_id *id)
+{
+       struct rp2_card *card;
+       struct rp2_uart_port *ports;
+       void __iomem * const *bars;
+       int rc;
+
+       card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
+       if (!card)
+               return -ENOMEM;
+       pci_set_drvdata(pdev, card);
+       spin_lock_init(&card->card_lock);
+       init_completion(&card->fw_loaded);
+
+       rc = pcim_enable_device(pdev);
+       if (rc)
+               return rc;
+
+       rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME);
+       if (rc)
+               return rc;
+
+       bars = pcim_iomap_table(pdev);
+       card->bar0 = bars[0];
+       card->bar1 = bars[1];
+       card->pdev = pdev;
+
+       rp2_decode_cap(id, &card->n_ports, &card->smpte);
+       dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports);
+
+       card->minor_start = rp2_alloc_ports(card->n_ports);
+       if (card->minor_start < 0) {
+               dev_err(&pdev->dev,
+                       "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n");
+               return -EINVAL;
+       }
+
+       rp2_init_card(card);
+
+       ports = devm_kzalloc(&pdev->dev, sizeof(*ports) * card->n_ports,
+                            GFP_KERNEL);
+       if (!ports)
+               return -ENOMEM;
+       card->ports = ports;
+
+       rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
+                             IRQF_SHARED, DRV_NAME, card);
+       if (rc)
+               return rc;
+
+       /*
+        * Only catastrophic errors (e.g. ENOMEM) are reported here.
+        * If the FW image is missing, we'll find out in rp2_fw_cb()
+        * and print an error message.
+        */
+       rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
+                                    GFP_KERNEL, card, rp2_fw_cb);
+       if (rc)
+               return rc;
+       dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
+
+       return 0;
+}
+
+static void rp2_remove(struct pci_dev *pdev)
+{
+       struct rp2_card *card = pci_get_drvdata(pdev);
+
+       wait_for_completion(&card->fw_loaded);
+       rp2_remove_ports(card);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(rp2_pci_tbl) = {
+
+       /* RocketPort INFINITY cards */
+
+       { RP_ID(0x0040), RP_CAP(8,  0) }, /* INF Octa, RJ45, selectable */
+       { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */
+       { RP_ID(0x0042), RP_CAP(8,  0) }, /* INF Octa, ext interface */
+       { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */
+       { RP_ID(0x0044), RP_CAP(4,  0) }, /* INF Quad, DB, selectable */
+       { RP_ID(0x0045), RP_CAP(8,  0) }, /* INF Octa, DB, selectable */
+       { RP_ID(0x0046), RP_CAP(4,  0) }, /* INF Quad, ext interface */
+       { RP_ID(0x0047), RP_CAP(4,  0) }, /* INF Quad, RJ45 */
+       { RP_ID(0x004a), RP_CAP(4,  0) }, /* INF Plus, Quad */
+       { RP_ID(0x004b), RP_CAP(8,  0) }, /* INF Plus, Octa */
+       { RP_ID(0x004c), RP_CAP(8,  0) }, /* INF III, Octa */
+       { RP_ID(0x004d), RP_CAP(4,  0) }, /* INF III, Quad */
+       { RP_ID(0x004e), RP_CAP(2,  0) }, /* INF Plus, 2, RS232 */
+       { RP_ID(0x004f), RP_CAP(2,  1) }, /* INF Plus, 2, SMPTE */
+       { RP_ID(0x0050), RP_CAP(4,  0) }, /* INF Plus, Quad, RJ45 */
+       { RP_ID(0x0051), RP_CAP(8,  0) }, /* INF Plus, Octa, RJ45 */
+       { RP_ID(0x0052), RP_CAP(8,  1) }, /* INF Octa, SMPTE */
+
+       /* RocketPort EXPRESS cards */
+
+       { RP_ID(0x0060), RP_CAP(8,  0) }, /* EXP Octa, RJ45, selectable */
+       { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */
+       { RP_ID(0x0062), RP_CAP(8,  0) }, /* EXP Octa, ext interface */
+       { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */
+       { RP_ID(0x0064), RP_CAP(4,  0) }, /* EXP Quad, DB, selectable */
+       { RP_ID(0x0065), RP_CAP(8,  0) }, /* EXP Octa, DB, selectable */
+       { RP_ID(0x0066), RP_CAP(4,  0) }, /* EXP Quad, ext interface */
+       { RP_ID(0x0067), RP_CAP(4,  0) }, /* EXP Quad, RJ45 */
+       { RP_ID(0x0068), RP_CAP(8,  0) }, /* EXP Octa, RJ11 */
+       { RP_ID(0x0072), RP_CAP(8,  1) }, /* EXP Octa, SMPTE */
+       { }
+};
+MODULE_DEVICE_TABLE(pci, rp2_pci_tbl);
+
+static struct pci_driver rp2_pci_driver = {
+       .name           = DRV_NAME,
+       .id_table       = rp2_pci_tbl,
+       .probe          = rp2_probe,
+       .remove         = rp2_remove,
+};
+
+static int __init rp2_uart_init(void)
+{
+       int rc;
+
+       rc = uart_register_driver(&rp2_uart_driver);
+       if (rc)
+               return rc;
+
+       rc = pci_register_driver(&rp2_pci_driver);
+       if (rc) {
+               uart_unregister_driver(&rp2_uart_driver);
+               return rc;
+       }
+
+       return 0;
+}
+
+static void __exit rp2_uart_exit(void)
+{
+       pci_unregister_driver(&rp2_pci_driver);
+       uart_unregister_driver(&rp2_uart_driver);
+}
+
+module_init(rp2_uart_init);
+module_exit(rp2_uart_exit);
+
+MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver");
+MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(RP2_FW_NAME);
index 78f99d97475b50c8427607d9bd23a3457a27319a..9dd47a5697268f45b259f971924a0af680d22053 100644 (file)
 /* ARC (Synopsys) on-chip UART */
 #define PORT_ARC       101
 
+/* Rocketport EXPRESS/INFINITY */
+#define PORT_RP2       102
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */