ASoC: Move initial WM8903 identification and reset to I2C probe

Get control of the device earlier and avoid trying to do an ASoC probe
on a card that won't work.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 0b12a5525c15ebdd03e4d8fbad32f5336216a5b4..a75688b5a568c8bffd0f8c760130a3ba61e99fed 100644 (file)
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -244,11 +244,6 @@ static bool wm8903_volatile_register(struct device *dev, unsigned int reg)
        }
 }
 
-static void wm8903_reset(struct snd_soc_codec *codec)
-{
-       snd_soc_write(codec, WM8903_SW_RESET_AND_ID, 0);
-}
-
 static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
                           struct snd_kcontrol *kcontrol, int event)
 {
@@ -1892,19 +1887,6 @@ static int wm8903_probe(struct snd_soc_codec *codec)
                return ret;
        }
 
-       val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID);
-       if (val != 0x8903) {
-               dev_err(codec->dev,
-                       "Device with ID register %x is not a WM8903\n", val);
-               return -ENODEV;
-       }
-
-       val = snd_soc_read(codec, WM8903_REVISION_NUMBER);
-       dev_info(codec->dev, "WM8903 revision %c\n",
-                (val & WM8903_CHIP_REV_MASK) + 'A');
-
-       wm8903_reset(codec);
-
        /* Set up GPIOs and microphone detection */
        if (pdata) {
                bool mic_gpio = false;
@@ -2058,6 +2040,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
                                      const struct i2c_device_id *id)
 {
        struct wm8903_priv *wm8903;
+       unsigned int val;
        int ret;
 
        wm8903 = devm_kzalloc(&i2c->dev,  sizeof(struct wm8903_priv),
@@ -2076,6 +2059,28 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
        i2c_set_clientdata(i2c, wm8903);
        wm8903->irq = i2c->irq;
 
+       ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val);
+       if (ret != 0) {
+               dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
+               goto err;
+       }
+       if (val != 0x8903) {
+               dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val);
+               ret = -ENODEV;
+               goto err;
+       }
+
+       ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val);
+       if (ret != 0) {
+               dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret);
+               goto err;
+       }
+       dev_info(&i2c->dev, "WM8903 revision %c\n",
+                (val & WM8903_CHIP_REV_MASK) + 'A');
+
+       /* Reset the device */
+       regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903);
+
        ret = snd_soc_register_codec(&i2c->dev,
                        &soc_codec_dev_wm8903, &wm8903_dai, 1);
        if (ret != 0)