bnx2: Update bnx2 to use new vlan accleration.
authorJesse Gross <jesse@nicira.com>
Wed, 20 Oct 2010 13:56:09 +0000 (13:56 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 21 Oct 2010 08:26:55 +0000 (01:26 -0700)
Make the bnx2 driver use the new vlan accleration model.

Signed-off-by: Jesse Gross <jesse@nicira.com>
CC: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2.c
drivers/net/bnx2.h

index 363ca8bcc974dd75ffcba3cce7b2aa7f08487ec4..bf3c830e7dda314ea4f5025f85d0698213a236c1 100644 (file)
@@ -37,9 +37,6 @@
 #include <linux/ethtool.h>
 #include <linux/mii.h>
 #include <linux/if_vlan.h>
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-#define BCM_VLAN 1
-#endif
 #include <net/ip.h>
 #include <net/tcp.h>
 #include <net/checksum.h>
@@ -3087,8 +3084,6 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
                struct sw_bd *rx_buf, *next_rx_buf;
                struct sk_buff *skb;
                dma_addr_t dma_addr;
-               u16 vtag = 0;
-               int hw_vlan __maybe_unused = 0;
 
                sw_ring_cons = RX_RING_IDX(sw_cons);
                sw_ring_prod = RX_RING_IDX(sw_prod);
@@ -3168,23 +3163,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
                        goto next_rx;
 
                if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
-                   !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
-                       vtag = rx_hdr->l2_fhdr_vlan_tag;
-#ifdef BCM_VLAN
-                       if (bp->vlgrp)
-                               hw_vlan = 1;
-                       else
-#endif
-                       {
-                               struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
-                                       __skb_push(skb, 4);
-
-                               memmove(ve, skb->data + 4, ETH_ALEN * 2);
-                               ve->h_vlan_proto = htons(ETH_P_8021Q);
-                               ve->h_vlan_TCI = htons(vtag);
-                               len += 4;
-                       }
-               }
+                   !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG))
+                       __vlan_hwaccel_put_tag(skb, rx_hdr->l2_fhdr_vlan_tag);
 
                skb->protocol = eth_type_trans(skb, bp->dev);
 
@@ -3211,14 +3191,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
                        skb->rxhash = rx_hdr->l2_fhdr_hash;
 
                skb_record_rx_queue(skb, bnapi - &bp->bnx2_napi[0]);
-
-#ifdef BCM_VLAN
-               if (hw_vlan)
-                       vlan_gro_receive(&bnapi->napi, bp->vlgrp, vtag, skb);
-               else
-#endif
-                       napi_gro_receive(&bnapi->napi, skb);
-
+               napi_gro_receive(&bnapi->napi, skb);
                rx_pkt++;
 
 next_rx:
@@ -3533,13 +3506,9 @@ bnx2_set_rx_mode(struct net_device *dev)
        rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS |
                                  BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
        sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
-#ifdef BCM_VLAN
-       if (!bp->vlgrp && (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
+       if (!(dev->features & NETIF_F_HW_VLAN_RX) &&
+            (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
                rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
-#else
-       if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
-               rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
-#endif
        if (dev->flags & IFF_PROMISC) {
                /* Promiscuous mode. */
                rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
@@ -6365,29 +6334,6 @@ bnx2_tx_timeout(struct net_device *dev)
        schedule_work(&bp->reset_task);
 }
 
-#ifdef BCM_VLAN
-/* Called with rtnl_lock */
-static void
-bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp)
-{
-       struct bnx2 *bp = netdev_priv(dev);
-
-       if (netif_running(dev))
-               bnx2_netif_stop(bp, false);
-
-       bp->vlgrp = vlgrp;
-
-       if (!netif_running(dev))
-               return;
-
-       bnx2_set_rx_mode(dev);
-       if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
-               bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);
-
-       bnx2_netif_start(bp, false);
-}
-#endif
-
 /* Called with netif_tx_lock.
  * bnx2_tx_int() runs without netif_tx_lock unless it needs to call
  * netif_wake_queue().
@@ -6428,12 +6374,11 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
                vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
        }
 
-#ifdef BCM_VLAN
        if (vlan_tx_tag_present(skb)) {
                vlan_tag_flags |=
                        (TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
        }
-#endif
+
        if ((mss = skb_shinfo(skb)->gso_size)) {
                u32 tcp_opt_len;
                struct iphdr *iph;
@@ -7578,7 +7523,28 @@ bnx2_set_tx_csum(struct net_device *dev, u32 data)
 static int
 bnx2_set_flags(struct net_device *dev, u32 data)
 {
-       return ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH);
+       struct bnx2 *bp = netdev_priv(dev);
+       int rc;
+
+       if (!(bp->flags & BNX2_FLAG_CAN_KEEP_VLAN) &&
+           !(data & ETH_FLAG_RXVLAN))
+               return -EOPNOTSUPP;
+
+       rc = ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH | ETH_FLAG_RXVLAN |
+                                 ETH_FLAG_TXVLAN);
+       if (rc)
+               return rc;
+
+       if ((!!(data & ETH_FLAG_RXVLAN) !=
+           !!(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) &&
+           netif_running(dev)) {
+               bnx2_netif_stop(bp, false);
+               bnx2_set_rx_mode(dev);
+               bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);
+               bnx2_netif_start(bp, false);
+       }
+
+       return 0;
 }
 
 static const struct ethtool_ops bnx2_ethtool_ops = {
@@ -8318,9 +8284,6 @@ static const struct net_device_ops bnx2_netdev_ops = {
        .ndo_set_mac_address    = bnx2_change_mac_addr,
        .ndo_change_mtu         = bnx2_change_mtu,
        .ndo_tx_timeout         = bnx2_tx_timeout,
-#ifdef BCM_VLAN
-       .ndo_vlan_rx_register   = bnx2_vlan_rx_register,
-#endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
        .ndo_poll_controller    = poll_bnx2,
 #endif
@@ -8328,9 +8291,7 @@ static const struct net_device_ops bnx2_netdev_ops = {
 
 static void inline vlan_features_add(struct net_device *dev, unsigned long flags)
 {
-#ifdef BCM_VLAN
        dev->vlan_features |= flags;
-#endif
 }
 
 static int __devinit
@@ -8379,9 +8340,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                dev->features |= NETIF_F_IPV6_CSUM;
                vlan_features_add(dev, NETIF_F_IPV6_CSUM);
        }
-#ifdef BCM_VLAN
        dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-#endif
        dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
        vlan_features_add(dev, NETIF_F_TSO | NETIF_F_TSO_ECN);
        if (CHIP_NUM(bp) == CHIP_NUM_5709) {
index efdfbc2a9e370bfbc5344fa8284332d191c34147..4f44db68c802a545c43caa61d522127411a01104 100644 (file)
@@ -6742,10 +6742,6 @@ struct bnx2 {
 
        struct bnx2_napi        bnx2_napi[BNX2_MAX_MSIX_VEC];
 
-#ifdef BCM_VLAN
-       struct                  vlan_group *vlgrp;
-#endif
-
        u32                     rx_buf_use_size;        /* useable size */
        u32                     rx_buf_size;            /* with alignment */
        u32                     rx_copy_thresh;