libata: Updates and fixes for pata_at91 driver
authorSergey Matyukevich <geomatsi@gmail.com>
Thu, 16 Jul 2009 18:38:55 +0000 (22:38 +0400)
committerJeff Garzik <jgarzik@redhat.com>
Wed, 29 Jul 2009 01:07:05 +0000 (21:07 -0400)
Please consider the following updates and fixes for pata_at91 driver.

* Removed extra headers
Here we need only static memory controller properties, which are
contained in generic header at91sam9_smc.h.
No need to include any specific headers for at91sam9260 SoC.

* No harsh BUG_ON for get_clk in set_smc_timing function
        get_clk is now performed in driver probing function,
        probing fails if master clock is not available

* Fixed uint/ulong mess in calc_mck_cycles function

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/ata/pata_at91.c

index 8561a9f195c11ed9dd2a49979da8970a7a70e633..5702affcb3254458f8c4afa28fa152a44a875455 100644 (file)
@@ -26,9 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 
-#include <mach/at91sam9260_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -44,65 +42,62 @@ struct at91_ide_info {
        unsigned long mode;
        unsigned int cs;
 
+       struct clk *mck;
+
        void __iomem *ide_addr;
        void __iomem *alt_addr;
 };
 
-const struct ata_timing initial_timing =
+static const struct ata_timing initial_timing =
        {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
 
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 {
        unsigned long mul;
 
-    /*
-     * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
-     *     x * (f / 1_000_000_000) =
-     *     x * ((f * 65536) / 1_000_000_000) / 65536 =
-     *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
-     */
+       /*
+       * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+       *     x * (f / 1_000_000_000) =
+       *     x * ((f * 65536) / 1_000_000_000) / 65536 =
+       *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+       */
 
-    mul = (mck_hz / 10000) << 16;
-    mul /= 100000;
+       mul = (mck_hz / 10000) << 16;
+       mul /= 100000;
 
-    return (ns * mul + 65536) >> 16;    /* rounding */
+       return (ns * mul + 65536) >> 16;    /* rounding */
 }
 
 static void set_smc_mode(struct at91_ide_info *info)
 {
-    at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
-    return;
+       at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+       return;
 }
 
 static void set_smc_timing(struct device *dev,
                struct at91_ide_info *info, const struct ata_timing *ata)
 {
-       int read_cycle, write_cycle, active, recover;
-       int nrd_setup, nrd_pulse, nrd_recover;
-       int nwe_setup, nwe_pulse;
+       unsigned long read_cycle, write_cycle, active, recover;
+       unsigned long nrd_setup, nrd_pulse, nrd_recover;
+       unsigned long nwe_setup, nwe_pulse;
 
-       int ncs_write_setup, ncs_write_pulse;
-       int ncs_read_setup, ncs_read_pulse;
+       unsigned long ncs_write_setup, ncs_write_pulse;
+       unsigned long ncs_read_setup, ncs_read_pulse;
 
-       unsigned int mck_hz;
-       struct clk *mck;
+       unsigned long mck_hz;
 
        read_cycle  = ata->cyc8b;
        nrd_setup   = ata->setup;
        nrd_pulse   = ata->act8b;
        nrd_recover = ata->rec8b;
 
-       mck = clk_get(NULL, "mck");
-       BUG_ON(IS_ERR(mck));
-       mck_hz = clk_get_rate(mck);
+       mck_hz = clk_get_rate(info->mck);
 
        read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
        nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
        nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
        nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
 
-       clk_put(mck);
-
        active  = nrd_setup + nrd_pulse;
        recover = read_cycle - active;
 
@@ -121,13 +116,13 @@ static void set_smc_timing(struct device *dev,
        ncs_write_setup = ncs_read_setup;
        ncs_write_pulse = ncs_read_pulse;
 
-       dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+       dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
                        nrd_setup, nrd_pulse, read_cycle);
-       dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+       dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
                        nwe_setup, nwe_pulse, write_cycle);
-       dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+       dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
                        ncs_read_setup, ncs_read_pulse);
-       dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+       dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
                        ncs_write_setup, ncs_write_pulse);
 
        at91_sys_write(AT91_SMC_SETUP(info->cs),
@@ -217,6 +212,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
        struct resource *mem_res;
        struct ata_host *host;
        struct ata_port *ap;
+
        int irq_flags = 0;
        int irq = 0;
        int ret;
@@ -261,6 +257,13 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
                return -ENOMEM;
        }
 
+       info->mck = clk_get(NULL, "mck");
+
+       if (IS_ERR(info->mck)) {
+               dev_err(dev, "failed to get access to mck clock\n");
+               return -ENODEV;
+       }
+
        info->cs    = board->chipselect;
        info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
                AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
@@ -304,6 +307,7 @@ err_alt_ioremap:
        devm_iounmap(dev, info->ide_addr);
 
 err_ide_ioremap:
+       clk_put(info->mck);
        kfree(info);
 
        return ret;
@@ -326,6 +330,7 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
 
        devm_iounmap(dev, info->ide_addr);
        devm_iounmap(dev, info->alt_addr);
+       clk_put(info->mck);
 
        kfree(info);
        return 0;