cmd64x: remove no longer needed debugging code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index ca0c46f6580a4985ea62935e64e3068e74f7facc..f2500c8826bb0145b0315935dc3ba210512068dd 100644 (file)
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -20,14 +20,6 @@
 
 #define DRV_NAME "cmd64x"
 
-#define CMD_DEBUG 0
-
-#if CMD_DEBUG
-#define cmdprintk(x...)        printk(x)
-#else
-#define cmdprintk(x...)
-#endif
-
 /*
  * CMD64x specific registers definition.
  */
@@ -76,9 +68,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
                {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
        static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
 
-       cmdprintk("program_cycle_times parameters: total=%d, active=%d\n",
-                 cycle_time, active_time);
-
        cycle_count     = quantize_timing( cycle_time, clock_time);
        active_count    = quantize_timing(active_time, clock_time);
        recovery_count  = cycle_count - active_count;
@@ -94,9 +83,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
        if (active_count > 16)          /* shouldn't actually happen... */
                active_count = 16;
 
-       cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n",
-                 cycle_count, active_count, recovery_count);
-
        /*
         * Convert values to internal chipset representation
         */
@@ -106,7 +92,6 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
        /* Program the active/recovery counts into the DRWTIM register */
        drwtim = (active_count << 4) | recovery_count;
        (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
-       cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]);
 }
 
 /*
@@ -150,7 +135,6 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
 
        if (setup_count > 5)            /* shouldn't actually happen... */
                setup_count = 5;
-       cmdprintk("Final address setup count: %d\n", setup_count);
 
        /*
         * Program the address setup clocks into the ARTTIM registers.
@@ -162,7 +146,6 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
        arttim &= ~0xc0;
        arttim |= setup_values[setup_count];
        (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
-       cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
 }
 
 /*