# Makefile for the linux ppc-specific parts of the memory manager.
#
-obj-y := fault.o mem.o
+obj-y := fault.o mem.o lmb.o
obj-$(CONFIG_PPC32) += init.o pgtable.o mmu_context.o \
- mem_pieces.o tlb.o
+ tlb.o
obj-$(CONFIG_PPC64) += init64.o pgtable64.o mmu_context64.o
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu.o hash_32.o
obj-$(CONFIG_40x) += 4xx_mmu.o
#include <asm/tlb.h>
#include <asm/bootinfo.h>
#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/sections.h>
-#include "mem_pieces.h"
#include "mmu_decl.h"
#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
unsigned long ppc_memstart;
unsigned long ppc_memoffset = PAGE_OFFSET;
-int mem_init_done;
-int init_bootmem_done;
int boot_mapsize;
#ifdef CONFIG_PPC_PMAC
unsigned long agp_special_page;
#endif
-extern char _end[];
-extern char etext[], _stext[];
-extern char __init_begin, __init_end;
-
#ifdef CONFIG_HIGHMEM
pte_t *kmap_pte;
pgprot_t kmap_prot;
#endif
void MMU_init(void);
-void set_phys_avail(unsigned long total_ram);
/* XXX should be in current.h -- paulus */
extern struct task_struct *current_set[NR_CPUS];
char *klimit = _end;
-struct mem_pieces phys_avail;
struct device_node *memory_node;
+extern int init_bootmem_done;
+
/*
* this tells the system to map all of ram with the segregs
* (i.e. page tables) instead of the bats.
int __map_without_bats;
int __map_without_ltlbs;
-/* max amount of RAM to use */
-unsigned long __max_memory;
/* max amount of low RAM to map in */
unsigned long __max_low_memory = MAX_LOW_MEM;
/*
- * Read in a property describing some pieces of memory.
+ * limit of what is accessible with initial MMU setup -
+ * 256MB usually, but only 16MB on 601.
*/
-static int __init get_mem_prop(char *name, struct mem_pieces *mp)
-{
- struct reg_property *rp;
- int i, s;
- unsigned int *ip;
- int nac = prom_n_addr_cells(memory_node);
- int nsc = prom_n_size_cells(memory_node);
-
- ip = (unsigned int *) get_property(memory_node, name, &s);
- if (ip == NULL) {
- printk(KERN_ERR "error: couldn't get %s property on /memory\n",
- name);
- return 0;
- }
- s /= (nsc + nac) * 4;
- rp = mp->regions;
- for (i = 0; i < s; ++i, ip += nac+nsc) {
- if (nac >= 2 && ip[nac-2] != 0)
- continue;
- rp->address = ip[nac-1];
- if (nsc >= 2 && ip[nac+nsc-2] != 0)
- rp->size = ~0U;
- else
- rp->size = ip[nac+nsc-1];
- ++rp;
- }
- mp->n_regions = rp - mp->regions;
-
- /* Make sure the pieces are sorted. */
- mem_pieces_sort(mp);
- mem_pieces_coalesce(mp);
- return 1;
-}
-
-/*
- * Collect information about physical RAM and which pieces are
- * already in use from the device tree.
- */
-unsigned long __init find_end_of_memory(void)
-{
- unsigned long a, total;
- struct mem_pieces phys_mem;
-
- /*
- * Find out where physical memory is, and check that it
- * starts at 0 and is contiguous. It seems that RAM is
- * always physically contiguous on Power Macintoshes.
- *
- * Supporting discontiguous physical memory isn't hard,
- * it just makes the virtual <-> physical mapping functions
- * more complicated (or else you end up wasting space
- * in mem_map).
- */
- memory_node = find_devices("memory");
- if (memory_node == NULL || !get_mem_prop("reg", &phys_mem)
- || phys_mem.n_regions == 0)
- panic("No RAM??");
- a = phys_mem.regions[0].address;
- if (a != 0)
- panic("RAM doesn't start at physical address 0");
- total = phys_mem.regions[0].size;
-
- if (phys_mem.n_regions > 1) {
- printk("RAM starting at 0x%x is not contiguous\n",
- phys_mem.regions[1].address);
- printk("Using RAM from 0 to 0x%lx\n", total-1);
- }
-
- return total;
-}
+unsigned long __initial_memory_limit = 0x10000000;
/*
* Check for command-line options that affect what MMU_init will do.
if (strstr(cmd_line, "noltlbs")) {
__map_without_ltlbs = 1;
}
-
- /* Look for mem= option on command line */
- if (strstr(cmd_line, "mem=")) {
- char *p, *q;
- unsigned long maxmem = 0;
-
- for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
- q = p + 4;
- if (p > cmd_line && p[-1] != ' ')
- continue;
- maxmem = simple_strtoul(q, &q, 0);
- if (*q == 'k' || *q == 'K') {
- maxmem <<= 10;
- ++q;
- } else if (*q == 'm' || *q == 'M') {
- maxmem <<= 20;
- ++q;
- }
- }
- __max_memory = maxmem;
- }
}
/*
if (ppc_md.progress)
ppc_md.progress("MMU:enter", 0x111);
+ /* 601 can only access 16MB at the moment */
+ if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+ __initial_memory_limit = 0x01000000;
+
/* parse args from command line */
MMU_setup();
- /*
- * Figure out how much memory we have, how much
- * is lowmem, and how much is highmem. If we were
- * passed the total memory size from the bootloader,
- * just use it.
- */
- if (boot_mem_size)
- total_memory = boot_mem_size;
- else
- total_memory = find_end_of_memory();
-
- if (__max_memory && total_memory > __max_memory)
- total_memory = __max_memory;
+ if (lmb.memory.cnt > 1) {
+ lmb.memory.cnt = 1;
+ lmb_analyze();
+ printk(KERN_WARNING "Only using first contiguous memory region");
+ }
+
+ total_memory = lmb_end_of_DRAM();
total_lowmem = total_memory;
+
#ifdef CONFIG_FSL_BOOKE
/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
* entries, so we need to adjust lowmem to match the amount we can map
total_memory = total_lowmem;
#endif /* CONFIG_HIGHMEM */
}
- set_phys_avail(total_lowmem);
/* Initialize the MMU hardware */
if (ppc_md.progress)
if (init_bootmem_done) {
p = alloc_bootmem_pages(PAGE_SIZE);
} else {
- p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE);
+ p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+ __initial_memory_limit));
}
return p;
}
}
}
#endif
-
-/*
- * Initialize the bootmem system and give it all the memory we
- * have available.
- */
-void __init do_init_bootmem(void)
-{
- unsigned long start, size;
- int i;
-
- /*
- * Find an area to use for the bootmem bitmap.
- * We look for the first area which is at least
- * 128kB in length (128kB is enough for a bitmap
- * for 4GB of memory, using 4kB pages), plus 1 page
- * (in case the address isn't page-aligned).
- */
- start = 0;
- size = 0;
- for (i = 0; i < phys_avail.n_regions; ++i) {
- unsigned long a = phys_avail.regions[i].address;
- unsigned long s = phys_avail.regions[i].size;
- if (s <= size)
- continue;
- start = a;
- size = s;
- if (s >= 33 * PAGE_SIZE)
- break;
- }
- start = PAGE_ALIGN(start);
-
- min_low_pfn = start >> PAGE_SHIFT;
- max_low_pfn = (PPC_MEMSTART + total_lowmem) >> PAGE_SHIFT;
- max_pfn = (PPC_MEMSTART + total_memory) >> PAGE_SHIFT;
- boot_mapsize = init_bootmem_node(&contig_page_data, min_low_pfn,
- PPC_MEMSTART >> PAGE_SHIFT,
- max_low_pfn);
-
- /* remove the bootmem bitmap from the available memory */
- mem_pieces_remove(&phys_avail, start, boot_mapsize, 1);
-
- /* add everything in phys_avail into the bootmem map */
- for (i = 0; i < phys_avail.n_regions; ++i)
- free_bootmem(phys_avail.regions[i].address,
- phys_avail.regions[i].size);
-
- init_bootmem_done = 1;
-}
-
-/*
- * paging_init() sets up the page tables - in fact we've already done this.
- */
-void __init paging_init(void)
-{
- unsigned long zones_size[MAX_NR_ZONES], i;
-
-#ifdef CONFIG_HIGHMEM
- map_page(PKMAP_BASE, 0, 0); /* XXX gross */
- pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
- (PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
- map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */
- kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
- (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
- kmap_prot = PAGE_KERNEL;
-#endif /* CONFIG_HIGHMEM */
-
- /*
- * All pages are DMA-able so we put them all in the DMA zone.
- */
- zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
- for (i = 1; i < MAX_NR_ZONES; i++)
- zones_size[i] = 0;
-
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-
- free_area_init(zones_size);
-}
-
-void __init mem_init(void)
-{
- unsigned long addr;
- int codepages = 0;
- int datapages = 0;
- int initpages = 0;
-#ifdef CONFIG_HIGHMEM
- unsigned long highmem_mapnr;
-
- highmem_mapnr = total_lowmem >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
- max_mapnr = total_memory >> PAGE_SHIFT;
-
- high_memory = (void *) __va(PPC_MEMSTART + total_lowmem);
- num_physpages = max_mapnr; /* RAM is assumed contiguous */
-
- totalram_pages += free_all_bootmem();
-
-#ifdef CONFIG_BLK_DEV_INITRD
- /* if we are booted from BootX with an initial ramdisk,
- make sure the ramdisk pages aren't reserved. */
- if (initrd_start) {
- for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE)
- ClearPageReserved(virt_to_page(addr));
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-#ifdef CONFIG_PPC_OF
- /* mark the RTAS pages as reserved */
- if ( rtas_data )
- for (addr = (ulong)__va(rtas_data);
- addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ;
- addr += PAGE_SIZE)
- SetPageReserved(virt_to_page(addr));
-#endif
-#ifdef CONFIG_PPC_PMAC
- if (agp_special_page)
- SetPageReserved(virt_to_page(agp_special_page));
-#endif
- for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
- addr += PAGE_SIZE) {
- if (!PageReserved(virt_to_page(addr)))
- continue;
- if (addr < (ulong) etext)
- codepages++;
- else if (addr >= (unsigned long)&__init_begin
- && addr < (unsigned long)&__init_end)
- initpages++;
- else if (addr < (ulong) klimit)
- datapages++;
- }
-
-#ifdef CONFIG_HIGHMEM
- {
- unsigned long pfn;
-
- for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
- struct page *page = mem_map + pfn;
-
- ClearPageReserved(page);
- set_page_count(page, 1);
- __free_page(page);
- totalhigh_pages++;
- }
- totalram_pages += totalhigh_pages;
- }
-#endif /* CONFIG_HIGHMEM */
-
- printk("Memory: %luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
- (unsigned long)nr_free_pages()<< (PAGE_SHIFT-10),
- codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10),
- initpages<< (PAGE_SHIFT-10),
- (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
-
-#ifdef CONFIG_PPC_PMAC
- if (agp_special_page)
- printk(KERN_INFO "AGP special page: 0x%08lx\n", agp_special_page);
-#endif
-
- mem_init_done = 1;
-}
-
-/*
- * Set phys_avail to the amount of physical memory,
- * less the kernel text/data/bss.
- */
-void __init
-set_phys_avail(unsigned long total_memory)
-{
- unsigned long kstart, ksize;
-
- /*
- * Initially, available physical memory is equivalent to all
- * physical memory.
- */
-
- phys_avail.regions[0].address = PPC_MEMSTART;
- phys_avail.regions[0].size = total_memory;
- phys_avail.n_regions = 1;
-
- /*
- * Map out the kernel text/data/bss from the available physical
- * memory.
- */
-
- kstart = __pa(_stext); /* should be 0 */
- ksize = PAGE_ALIGN(klimit - _stext);
-
- mem_pieces_remove(&phys_avail, kstart, ksize, 0);
- mem_pieces_remove(&phys_avail, 0, 0x4000, 0);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
- /* Remove the init RAM disk from the available memory. */
- if (initrd_start) {
- mem_pieces_remove(&phys_avail, __pa(initrd_start),
- initrd_end - initrd_start, 1);
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_OF
- /* remove the RTAS pages from the available memory */
- if (rtas_data)
- mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1);
-#endif
-#ifdef CONFIG_PPC_PMAC
- /* Because of some uninorth weirdness, we need a page of
- * memory as high as possible (it must be outside of the
- * bus address seen as the AGP aperture). It will be used
- * by the r128 DRM driver
- *
- * FIXME: We need to make sure that page doesn't overlap any of the\
- * above. This could be done by improving mem_pieces_find to be able
- * to do a backward search from the end of the list.
- */
- if (_machine == _MACH_Pmac && find_devices("uni-north-agp")) {
- agp_special_page = (total_memory - PAGE_SIZE);
- mem_pieces_remove(&phys_avail, agp_special_page, PAGE_SIZE, 0);
- agp_special_page = (unsigned long)__va(agp_special_page);
- }
-#endif /* CONFIG_PPC_PMAC */
-}
-
-/* Mark some memory as reserved by removing it from phys_avail. */
-void __init reserve_phys_mem(unsigned long start, unsigned long size)
-{
- mem_pieces_remove(&phys_avail, start, size, 1);
-}
}
#endif
-/*
- * Initialize the bootmem system and give it all the memory we
- * have available.
- */
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-void __init do_init_bootmem(void)
-{
- unsigned long i;
- unsigned long start, bootmap_pages;
- unsigned long total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
- int boot_mapsize;
-
- /*
- * Find an area to use for the bootmem bitmap. Calculate the size of
- * bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
- * Add 1 additional page in case the address isn't page-aligned.
- */
- bootmap_pages = bootmem_bootmap_pages(total_pages);
-
- start = lmb_alloc(bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
- BUG_ON(!start);
-
- boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
-
- max_pfn = max_low_pfn;
-
- /* Add all physical memory to the bootmem map, mark each area
- * present.
- */
- for (i=0; i < lmb.memory.cnt; i++)
- free_bootmem(lmb.memory.region[i].base,
- lmb_size_bytes(&lmb.memory, i));
-
- /* reserve the sections we're already using */
- for (i=0; i < lmb.reserved.cnt; i++)
- reserve_bootmem(lmb.reserved.region[i].base,
- lmb_size_bytes(&lmb.reserved, i));
-
- for (i=0; i < lmb.memory.cnt; i++)
- memory_present(0, lmb_start_pfn(&lmb.memory, i),
- lmb_end_pfn(&lmb.memory, i));
-}
-
-/*
- * paging_init() sets up the page tables - in fact we've already done this.
- */
-void __init paging_init(void)
-{
- unsigned long zones_size[MAX_NR_ZONES];
- unsigned long zholes_size[MAX_NR_ZONES];
- unsigned long total_ram = lmb_phys_mem_size();
- unsigned long top_of_ram = lmb_end_of_DRAM();
-
- printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
- top_of_ram, total_ram);
- printk(KERN_INFO "Memory hole size: %ldMB\n",
- (top_of_ram - total_ram) >> 20);
- /*
- * All pages are DMA-able so we put them all in the DMA zone.
- */
- memset(zones_size, 0, sizeof(zones_size));
- memset(zholes_size, 0, sizeof(zholes_size));
-
- zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
- zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
-
- free_area_init_node(0, NODE_DATA(0), zones_size,
- __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
-}
-#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
-
static struct kcore_list kcore_vmem;
static int __init setup_kcore(void)
}
module_init(setup_kcore);
-void __init mem_init(void)
-{
-#ifdef CONFIG_NEED_MULTIPLE_NODES
- int nid;
-#endif
- pg_data_t *pgdat;
- unsigned long i;
- struct page *page;
- unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
-
- num_physpages = max_low_pfn; /* RAM is assumed contiguous */
- high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-
-#ifdef CONFIG_NEED_MULTIPLE_NODES
- for_each_online_node(nid) {
- if (NODE_DATA(nid)->node_spanned_pages != 0) {
- printk("freeing bootmem node %x\n", nid);
- totalram_pages +=
- free_all_bootmem_node(NODE_DATA(nid));
- }
- }
-#else
- max_mapnr = num_physpages;
- totalram_pages += free_all_bootmem();
-#endif
-
- for_each_pgdat(pgdat) {
- for (i = 0; i < pgdat->node_spanned_pages; i++) {
- page = pgdat_page_nr(pgdat, i);
- if (PageReserved(page))
- reservedpages++;
- }
- }
-
- codesize = (unsigned long)&_etext - (unsigned long)&_stext;
- initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin;
- datasize = (unsigned long)&_edata - (unsigned long)&__init_end;
- bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start;
-
- printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, "
- "%luk reserved, %luk data, %luk bss, %luk init)\n",
- (unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
- num_physpages << (PAGE_SHIFT-10),
- codesize >> 10,
- reservedpages << (PAGE_SHIFT-10),
- datasize >> 10,
- bsssize >> 10,
- initsize >> 10);
-
- mem_init_done = 1;
-
- /* Initialize the vDSO */
- vdso_init();
-}
-
void __iomem * reserve_phb_iospace(unsigned long size)
{
void __iomem *virt_addr;
--- /dev/null
+/*
+ * Procedures for maintaining information about logical memory blocks.
+ *
+ * Peter Bergner, IBM Corp. June 2001.
+ * Copyright (C) 2001 Peter Bergner.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/types.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#ifdef CONFIG_PPC32
+#include "mmu_decl.h" /* for __max_low_memory */
+#endif
+
+struct lmb lmb;
+
+#undef DEBUG
+
+void lmb_dump_all(void)
+{
+#ifdef DEBUG
+ unsigned long i;
+
+ udbg_printf("lmb_dump_all:\n");
+ udbg_printf(" memory.cnt = 0x%lx\n",
+ lmb.memory.cnt);
+ udbg_printf(" memory.size = 0x%lx\n",
+ lmb.memory.size);
+ for (i=0; i < lmb.memory.cnt ;i++) {
+ udbg_printf(" memory.region[0x%x].base = 0x%lx\n",
+ i, lmb.memory.region[i].base);
+ udbg_printf(" .size = 0x%lx\n",
+ lmb.memory.region[i].size);
+ }
+
+ udbg_printf("\n reserved.cnt = 0x%lx\n",
+ lmb.reserved.cnt);
+ udbg_printf(" reserved.size = 0x%lx\n",
+ lmb.reserved.size);
+ for (i=0; i < lmb.reserved.cnt ;i++) {
+ udbg_printf(" reserved.region[0x%x].base = 0x%lx\n",
+ i, lmb.reserved.region[i].base);
+ udbg_printf(" .size = 0x%lx\n",
+ lmb.reserved.region[i].size);
+ }
+#endif /* DEBUG */
+}
+
+static unsigned long __init lmb_addrs_overlap(unsigned long base1,
+ unsigned long size1, unsigned long base2, unsigned long size2)
+{
+ return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
+}
+
+static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
+ unsigned long base2, unsigned long size2)
+{
+ if (base2 == base1 + size1)
+ return 1;
+ else if (base1 == base2 + size2)
+ return -1;
+
+ return 0;
+}
+
+static long __init lmb_regions_adjacent(struct lmb_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ unsigned long base1 = rgn->region[r1].base;
+ unsigned long size1 = rgn->region[r1].size;
+ unsigned long base2 = rgn->region[r2].base;
+ unsigned long size2 = rgn->region[r2].size;
+
+ return lmb_addrs_adjacent(base1, size1, base2, size2);
+}
+
+/* Assumption: base addr of region 1 < base addr of region 2 */
+static void __init lmb_coalesce_regions(struct lmb_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ unsigned long i;
+
+ rgn->region[r1].size += rgn->region[r2].size;
+ for (i=r2; i < rgn->cnt-1; i++) {
+ rgn->region[i].base = rgn->region[i+1].base;
+ rgn->region[i].size = rgn->region[i+1].size;
+ }
+ rgn->cnt--;
+}
+
+/* This routine called with relocation disabled. */
+void __init lmb_init(void)
+{
+ /* Create a dummy zero size LMB which will get coalesced away later.
+ * This simplifies the lmb_add() code below...
+ */
+ lmb.memory.region[0].base = 0;
+ lmb.memory.region[0].size = 0;
+ lmb.memory.cnt = 1;
+
+ /* Ditto. */
+ lmb.reserved.region[0].base = 0;
+ lmb.reserved.region[0].size = 0;
+ lmb.reserved.cnt = 1;
+}
+
+/* This routine may be called with relocation disabled. */
+void __init lmb_analyze(void)
+{
+ int i;
+
+ lmb.memory.size = 0;
+
+ for (i = 0; i < lmb.memory.cnt; i++)
+ lmb.memory.size += lmb.memory.region[i].size;
+}
+
+/* This routine called with relocation disabled. */
+static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
+ unsigned long size)
+{
+ unsigned long i, coalesced = 0;
+ long adjacent;
+
+ /* First try and coalesce this LMB with another. */
+ for (i=0; i < rgn->cnt; i++) {
+ unsigned long rgnbase = rgn->region[i].base;
+ unsigned long rgnsize = rgn->region[i].size;
+
+ adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize);
+ if ( adjacent > 0 ) {
+ rgn->region[i].base -= size;
+ rgn->region[i].size += size;
+ coalesced++;
+ break;
+ }
+ else if ( adjacent < 0 ) {
+ rgn->region[i].size += size;
+ coalesced++;
+ break;
+ }
+ }
+
+ if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) {
+ lmb_coalesce_regions(rgn, i, i+1);
+ coalesced++;
+ }
+
+ if (coalesced)
+ return coalesced;
+ if (rgn->cnt >= MAX_LMB_REGIONS)
+ return -1;
+
+ /* Couldn't coalesce the LMB, so add it to the sorted table. */
+ for (i = rgn->cnt-1; i >= 0; i--) {
+ if (base < rgn->region[i].base) {
+ rgn->region[i+1].base = rgn->region[i].base;
+ rgn->region[i+1].size = rgn->region[i].size;
+ } else {
+ rgn->region[i+1].base = base;
+ rgn->region[i+1].size = size;
+ break;
+ }
+ }
+ rgn->cnt++;
+
+ return 0;
+}
+
+/* This routine may be called with relocation disabled. */
+long __init lmb_add(unsigned long base, unsigned long size)
+{
+ struct lmb_region *_rgn = &(lmb.memory);
+
+ /* On pSeries LPAR systems, the first LMB is our RMO region. */
+ if (base == 0)
+ lmb.rmo_size = size;
+
+ return lmb_add_region(_rgn, base, size);
+
+}
+
+long __init lmb_reserve(unsigned long base, unsigned long size)
+{
+ struct lmb_region *_rgn = &(lmb.reserved);
+
+ return lmb_add_region(_rgn, base, size);
+}
+
+long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
+ unsigned long size)
+{
+ unsigned long i;
+
+ for (i=0; i < rgn->cnt; i++) {
+ unsigned long rgnbase = rgn->region[i].base;
+ unsigned long rgnsize = rgn->region[i].size;
+ if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) {
+ break;
+ }
+ }
+
+ return (i < rgn->cnt) ? i : -1;
+}
+
+unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
+{
+ return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
+}
+
+unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
+ unsigned long max_addr)
+{
+ long i, j;
+ unsigned long base = 0;
+
+#ifdef CONFIG_PPC32
+ /* On 32-bit, make sure we allocate lowmem */
+ if (max_addr == LMB_ALLOC_ANYWHERE)
+ max_addr = __max_low_memory;
+#endif
+ for (i = lmb.memory.cnt-1; i >= 0; i--) {
+ unsigned long lmbbase = lmb.memory.region[i].base;
+ unsigned long lmbsize = lmb.memory.region[i].size;
+
+ if (max_addr == LMB_ALLOC_ANYWHERE)
+ base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
+ else if (lmbbase < max_addr) {
+ base = min(lmbbase + lmbsize, max_addr);
+ base = _ALIGN_DOWN(base - size, align);
+ } else
+ continue;
+
+ while ((lmbbase <= base) &&
+ ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
+ base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
+ align);
+
+ if ((base != 0) && (lmbbase <= base))
+ break;
+ }
+
+ if (i < 0)
+ return 0;
+
+ lmb_add_region(&lmb.reserved, base, size);
+
+ return base;
+}
+
+/* You must call lmb_analyze() before this. */
+unsigned long __init lmb_phys_mem_size(void)
+{
+ return lmb.memory.size;
+}
+
+unsigned long __init lmb_end_of_DRAM(void)
+{
+ int idx = lmb.memory.cnt - 1;
+
+ return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
+}
+
+/*
+ * Truncate the lmb list to memory_limit if it's set
+ * You must call lmb_analyze() after this.
+ */
+void __init lmb_enforce_memory_limit(unsigned long memory_limit)
+{
+ unsigned long i, limit;
+
+ if (! memory_limit)
+ return;
+
+ limit = memory_limit;
+ for (i = 0; i < lmb.memory.cnt; i++) {
+ if (limit > lmb.memory.region[i].size) {
+ limit -= lmb.memory.region[i].size;
+ continue;
+ }
+
+ lmb.memory.region[i].size = limit;
+ lmb.memory.cnt = i + 1;
+ break;
+ }
+}
#include <asm/tlb.h>
#include <asm/bootinfo.h>
#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/sections.h>
-#include "mem_pieces.h"
#include "mmu_decl.h"
#ifndef CPU_FTR_COHERENT_ICACHE
#define CPU_FTR_NOEXECUTE 0
#endif
+int init_bootmem_done;
+int mem_init_done;
+
/*
* This is called by /dev/mem to know if a given address has to
* be mapped non-cacheable or not
printk("%ld pages swap cached\n", cached);
}
+/*
+ * Initialize the bootmem system and give it all the memory we
+ * have available. If we are using highmem, we only put the
+ * lowmem into the bootmem system.
+ */
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+void __init do_init_bootmem(void)
+{
+ unsigned long i;
+ unsigned long start, bootmap_pages;
+ unsigned long total_pages;
+ int boot_mapsize;
+
+ max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
+#ifdef CONFIG_HIGHMEM
+ total_pages = total_lowmem >> PAGE_SHIFT;
+#endif
+
+ /*
+ * Find an area to use for the bootmem bitmap. Calculate the size of
+ * bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
+ * Add 1 additional page in case the address isn't page-aligned.
+ */
+ bootmap_pages = bootmem_bootmap_pages(total_pages);
+
+ start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
+ BUG_ON(!start);
+
+ boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
+
+ /* Add all physical memory to the bootmem map, mark each area
+ * present.
+ */
+ for (i = 0; i < lmb.memory.cnt; i++) {
+ unsigned long base = lmb.memory.region[i].base;
+ unsigned long size = lmb_size_bytes(&lmb.memory, i);
+#ifdef CONFIG_HIGHMEM
+ if (base >= total_lowmem)
+ continue;
+ if (base + size > total_lowmem)
+ size = total_lowmem - base;
+#endif
+ free_bootmem(base, size);
+ }
+
+ /* reserve the sections we're already using */
+ for (i = 0; i < lmb.reserved.cnt; i++)
+ reserve_bootmem(lmb.reserved.region[i].base,
+ lmb_size_bytes(&lmb.reserved, i));
+
+ /* XXX need to clip this if using highmem? */
+ for (i = 0; i < lmb.memory.cnt; i++)
+ memory_present(0, lmb_start_pfn(&lmb.memory, i),
+ lmb_end_pfn(&lmb.memory, i));
+ init_bootmem_done = 1;
+}
+
+/*
+ * paging_init() sets up the page tables - in fact we've already done this.
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES];
+ unsigned long zholes_size[MAX_NR_ZONES];
+ unsigned long total_ram = lmb_phys_mem_size();
+ unsigned long top_of_ram = lmb_end_of_DRAM();
+
+#ifdef CONFIG_HIGHMEM
+ map_page(PKMAP_BASE, 0, 0); /* XXX gross */
+ pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
+ (PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
+ map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */
+ kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
+ (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
+ kmap_prot = PAGE_KERNEL;
+#endif /* CONFIG_HIGHMEM */
+
+ printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
+ top_of_ram, total_ram);
+ printk(KERN_INFO "Memory hole size: %ldMB\n",
+ (top_of_ram - total_ram) >> 20);
+ /*
+ * All pages are DMA-able so we put them all in the DMA zone.
+ */
+ memset(zones_size, 0, sizeof(zones_size));
+ memset(zholes_size, 0, sizeof(zholes_size));
+
+ zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
+ zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+ zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
+ zholes_size[ZONE_HIGHMEM] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+#else
+ zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
+ zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+#endif /* CONFIG_HIGHMEM */
+
+ free_area_init_node(0, NODE_DATA(0), zones_size,
+ __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
+}
+#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
+
+void __init mem_init(void)
+{
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+ int nid;
+#endif
+ pg_data_t *pgdat;
+ unsigned long i;
+ struct page *page;
+ unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
+
+ num_physpages = max_pfn; /* RAM is assumed contiguous */
+ high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+ for_each_online_node(nid) {
+ if (NODE_DATA(nid)->node_spanned_pages != 0) {
+ printk("freeing bootmem node %x\n", nid);
+ totalram_pages +=
+ free_all_bootmem_node(NODE_DATA(nid));
+ }
+ }
+#else
+ max_mapnr = num_physpages;
+ totalram_pages += free_all_bootmem();
+#endif
+ for_each_pgdat(pgdat) {
+ for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ page = pgdat_page_nr(pgdat, i);
+ if (PageReserved(page))
+ reservedpages++;
+ }
+ }
+
+ codesize = (unsigned long)&_sdata - (unsigned long)&_stext;
+ datasize = (unsigned long)&__init_begin - (unsigned long)&_sdata;
+ initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin;
+ bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start;
+
+#ifdef CONFIG_HIGHMEM
+ {
+ unsigned long pfn, highmem_mapnr;
+
+ highmem_mapnr = total_lowmem >> PAGE_SHIFT;
+ for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
+ struct page *page = pfn_to_page(pfn);
+
+ ClearPageReserved(page);
+ set_page_count(page, 1);
+ __free_page(page);
+ totalhigh_pages++;
+ }
+ totalram_pages += totalhigh_pages;
+ printk(KERN_INFO "High memory: %luk\n",
+ totalhigh_pages << (PAGE_SHIFT-10));
+ }
+#endif /* CONFIG_HIGHMEM */
+
+ printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, "
+ "%luk reserved, %luk data, %luk bss, %luk init)\n",
+ (unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
+ num_physpages << (PAGE_SHIFT-10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT-10),
+ datasize >> 10,
+ bsssize >> 10,
+ initsize >> 10);
+
+ mem_init_done = 1;
+
+#ifdef CONFIG_PPC64
+ /* Initialize the vDSO */
+ vdso_init();
+#endif
+}
+
/*
* This is called when a page has been modified by the kernel.
* It just marks the page as not i-cache clean. We do the i-cache
+++ /dev/null
-/*
- * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- * Changes to accommodate Power Macintoshes.
- * Cort Dougan <cort@cs.nmt.edu>
- * Rewrites.
- * Grant Erickson <grant@lcse.umn.edu>
- * General rework and split from mm/init.c.
- *
- * Module name: mem_pieces.c
- *
- * Description:
- * Routines and data structures for manipulating and representing
- * phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <asm/page.h>
-
-#include "mem_pieces.h"
-
-extern struct mem_pieces phys_avail;
-
-static void mem_pieces_print(struct mem_pieces *);
-
-/*
- * Scan a region for a piece of a given size with the required alignment.
- */
-void __init *
-mem_pieces_find(unsigned int size, unsigned int align)
-{
- int i;
- unsigned a, e;
- struct mem_pieces *mp = &phys_avail;
-
- for (i = 0; i < mp->n_regions; ++i) {
- a = mp->regions[i].address;
- e = a + mp->regions[i].size;
- a = (a + align - 1) & -align;
- if (a + size <= e) {
- mem_pieces_remove(mp, a, size, 1);
- return (void *) __va(a);
- }
- }
- panic("Couldn't find %u bytes at %u alignment\n", size, align);
-
- return NULL;
-}
-
-/*
- * Remove some memory from an array of pieces
- */
-void __init
-mem_pieces_remove(struct mem_pieces *mp, unsigned int start, unsigned int size,
- int must_exist)
-{
- int i, j;
- unsigned int end, rs, re;
- struct reg_property *rp;
-
- end = start + size;
- for (i = 0, rp = mp->regions; i < mp->n_regions; ++i, ++rp) {
- if (end > rp->address && start < rp->address + rp->size)
- break;
- }
- if (i >= mp->n_regions) {
- if (must_exist)
- printk("mem_pieces_remove: [%x,%x) not in any region\n",
- start, end);
- return;
- }
- for (; i < mp->n_regions && end > rp->address; ++i, ++rp) {
- rs = rp->address;
- re = rs + rp->size;
- if (must_exist && (start < rs || end > re)) {
- printk("mem_pieces_remove: bad overlap [%x,%x) with",
- start, end);
- mem_pieces_print(mp);
- must_exist = 0;
- }
- if (start > rs) {
- rp->size = start - rs;
- if (end < re) {
- /* need to split this entry */
- if (mp->n_regions >= MEM_PIECES_MAX)
- panic("eek... mem_pieces overflow");
- for (j = mp->n_regions; j > i + 1; --j)
- mp->regions[j] = mp->regions[j-1];
- ++mp->n_regions;
- rp[1].address = end;
- rp[1].size = re - end;
- }
- } else {
- if (end < re) {
- rp->address = end;
- rp->size = re - end;
- } else {
- /* need to delete this entry */
- for (j = i; j < mp->n_regions - 1; ++j)
- mp->regions[j] = mp->regions[j+1];
- --mp->n_regions;
- --i;
- --rp;
- }
- }
- }
-}
-
-static void __init
-mem_pieces_print(struct mem_pieces *mp)
-{
- int i;
-
- for (i = 0; i < mp->n_regions; ++i)
- printk(" [%x, %x)", mp->regions[i].address,
- mp->regions[i].address + mp->regions[i].size);
- printk("\n");
-}
-
-void __init
-mem_pieces_sort(struct mem_pieces *mp)
-{
- unsigned long a, s;
- int i, j;
-
- for (i = 1; i < mp->n_regions; ++i) {
- a = mp->regions[i].address;
- s = mp->regions[i].size;
- for (j = i - 1; j >= 0; --j) {
- if (a >= mp->regions[j].address)
- break;
- mp->regions[j+1] = mp->regions[j];
- }
- mp->regions[j+1].address = a;
- mp->regions[j+1].size = s;
- }
-}
-
-void __init
-mem_pieces_coalesce(struct mem_pieces *mp)
-{
- unsigned long a, s, ns;
- int i, j, d;
-
- d = 0;
- for (i = 0; i < mp->n_regions; i = j) {
- a = mp->regions[i].address;
- s = mp->regions[i].size;
- for (j = i + 1; j < mp->n_regions
- && mp->regions[j].address - a <= s; ++j) {
- ns = mp->regions[j].address + mp->regions[j].size - a;
- if (ns > s)
- s = ns;
- }
- mp->regions[d].address = a;
- mp->regions[d].size = s;
- ++d;
- }
- mp->n_regions = d;
-}
+++ /dev/null
-/*
- * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- * Changes to accommodate Power Macintoshes.
- * Cort Dougan <cort@cs.nmt.edu>
- * Rewrites.
- * Grant Erickson <grant@lcse.umn.edu>
- * General rework and split from mm/init.c.
- *
- * Module name: mem_pieces.h
- *
- * Description:
- * Routines and data structures for manipulating and representing
- * phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#ifndef __MEM_PIECES_H__
-#define __MEM_PIECES_H__
-
-#include <asm/prom.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* Type Definitions */
-
-#define MEM_PIECES_MAX 32
-
-struct mem_pieces {
- int n_regions;
- struct reg_property regions[MEM_PIECES_MAX];
-};
-
-/* Function Prototypes */
-
-extern void *mem_pieces_find(unsigned int size, unsigned int align);
-extern void mem_pieces_remove(struct mem_pieces *mp, unsigned int start,
- unsigned int size, int must_exist);
-extern void mem_pieces_coalesce(struct mem_pieces *mp);
-extern void mem_pieces_sort(struct mem_pieces *mp);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MEM_PIECES_H__ */
extern unsigned long ioremap_bot;
extern unsigned int rtas_data, rtas_size;
+extern unsigned long __max_low_memory;
+extern unsigned long __initial_memory_limit;
extern unsigned long total_memory;
extern unsigned long total_lowmem;
extern int mem_init_done;
* Don't allow anybody to remap normal RAM that we're using.
* mem_init() sets high_memory so only do the check after that.
*/
- if ( mem_init_done && (p < virt_to_phys(high_memory)) )
- {
+ if (mem_init_done && (p < virt_to_phys(high_memory))) {
printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
__builtin_return_address(0));
return NULL;
#include <asm/prom.h>
#include <asm/mmu.h>
#include <asm/machdep.h>
+#include <asm/lmb.h>
#include "mmu_decl.h"
-#include "mem_pieces.h"
PTE *Hash, *Hash_end;
unsigned long Hash_size, Hash_mask;
#define MIN_N_HPTEG 1024 /* min 64kB hash table */
#endif
-#ifdef CONFIG_POWER4
- /* The hash table has already been allocated and initialized
- in prom.c */
- n_hpteg = Hash_size >> LG_HPTEG_SIZE;
- lg_n_hpteg = __ilog2(n_hpteg);
-
- /* Remove the hash table from the available memory */
- if (Hash)
- reserve_phys_mem(__pa(Hash), Hash_size);
-
-#else /* CONFIG_POWER4 */
/*
* Allow 1 HPTE (1/8 HPTEG) for each page of memory.
* This is less than the recommended amount, but then
* Find some memory for the hash table.
*/
if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
- Hash = mem_pieces_find(Hash_size, Hash_size);
+ Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+ __initial_memory_limit));
cacheable_memzero(Hash, Hash_size);
_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
-#endif /* CONFIG_POWER4 */
Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
#define PTE_FMT "%.8lx"
#endif
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr,size) _ALIGN_UP(addr,size)
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE)
+
+
#undef STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS
#endif
-
-/* align addr on a size boundary - adjust address up if needed -- Cort */
-#define _ALIGN(addr,size) (((addr)+(size)-1)&(~((size)-1)))
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-
struct page;
extern void clear_pages(void *page, int order);
static inline void clear_page(void *page) { clear_pages(page, 0); }
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff