#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200
-/**
- * smu_dcc_get_max_ports() -
- *
- * This macro returns the maximum number of logical ports supported by the
- * hardware. The caller passes in the value read from the device context
- * capacity register and this macro will mash and shift the value appropriately.
- */
-#define smu_dcc_get_max_ports(dcc_value) \
+#define smu_max_ports(dcc_value) \
(\
(((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \
>> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \
)
-/**
- * smu_dcc_get_max_task_context() -
- *
- * This macro returns the maximum number of task contexts supported by the
- * hardware. The caller passes in the value read from the device context
- * capacity register and this macro will mash and shift the value appropriately.
- */
-#define smu_dcc_get_max_task_context(dcc_value) \
+#define smu_max_task_contexts(dcc_value) \
(\
(((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \
>> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \
)
-/**
- * smu_dcc_get_max_remote_node_context() -
- *
- * This macro returns the maximum number of remote node contexts supported by
- * the hardware. The caller passes in the value read from the device context
- * capacity register and this macro will mash and shift the value appropriately.
- */
-#define smu_dcc_get_max_remote_node_context(dcc_value) \
+#define smu_max_rncs(dcc_value) \
(\
(((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \
>> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \
)
-
#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100
/**
INCREMENT_QUEUE_GET(\
(index), \
(cycle), \
- (controller)->completion_queue_entries, \
- SMU_CQGR_CYCLE_BIT \
- )
+ SCU_MAX_COMPLETION_QUEUE_ENTRIES, \
+ SMU_CQGR_CYCLE_BIT)
/**
* INCREMENT_EVENT_QUEUE_GET() -
INCREMENT_QUEUE_GET(\
(index), \
(cycle), \
- (controller)->completion_event_entries, \
+ SCU_MAX_EVENTS, \
SMU_CQGR_EVENT_CYCLE_BIT \
)
scic->completion_queue_get = 0;
- completion_queue_control_value = (
- SMU_CQC_QUEUE_LIMIT_SET(scic->completion_queue_entries - 1)
- | SMU_CQC_EVENT_LIMIT_SET(scic->completion_event_entries - 1)
- );
+ completion_queue_control_value =
+ (SMU_CQC_QUEUE_LIMIT_SET(SCU_MAX_COMPLETION_QUEUE_ENTRIES - 1) |
+ SMU_CQC_EVENT_LIMIT_SET(SCU_MAX_EVENTS - 1));
writel(completion_queue_control_value,
&scic->smu_registers->completion_queue_control);
&scic->smu_registers->completion_queue_put);
/* Initialize the cycle bit of the completion queue entries */
- for (index = 0; index < scic->completion_queue_entries; index++) {
+ for (index = 0; index < SCU_MAX_COMPLETION_QUEUE_ENTRIES; index++) {
/*
* If get.cycle_bit != completion_queue.cycle_bit
* its not a valid completion queue entry
/* Write the queue size */
frame_queue_control_value =
- SCU_UFQC_GEN_VAL(QUEUE_SIZE,
- scic->uf_control.address_table.count);
+ SCU_UFQC_GEN_VAL(QUEUE_SIZE, SCU_MAX_UNSOLICITED_FRAMES);
writel(frame_queue_control_value,
&scic->scu_registers->sdma.unsolicited_frame_queue_control);
sci_init_timer(&scic->timer, controller_timeout);
- /* Set the default maximum values */
- scic->completion_event_entries = SCU_EVENT_COUNT;
- scic->completion_queue_entries = SCU_COMPLETION_QUEUE_COUNT;
- scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES;
- scic->logical_port_entries = SCI_MAX_PORTS;
- scic->task_context_entries = SCU_IO_REQUEST_COUNT;
- scic->uf_control.buffers.count = SCU_UNSOLICITED_FRAME_COUNT;
- scic->uf_control.address_table.count = SCU_UNSOLICITED_FRAME_COUNT;
-
/* Initialize the User and OEM parameters to default values. */
scic_sds_controller_set_default_config_parameters(scic);
udelay(AFE_REGISTER_WRITE_DELAY);
}
-static enum sci_status scic_controller_set_mode(struct scic_sds_controller *scic,
- enum sci_controller_mode operating_mode)
-{
- enum sci_status status = SCI_SUCCESS;
-
- if ((scic->sm.current_state_id == SCIC_INITIALIZING) ||
- (scic->sm.current_state_id == SCIC_INITIALIZED)) {
- switch (operating_mode) {
- case SCI_MODE_SPEED:
- scic->remote_node_entries = SCI_MAX_REMOTE_DEVICES;
- scic->task_context_entries = SCU_IO_REQUEST_COUNT;
- scic->uf_control.buffers.count =
- SCU_UNSOLICITED_FRAME_COUNT;
- scic->completion_event_entries = SCU_EVENT_COUNT;
- scic->completion_queue_entries =
- SCU_COMPLETION_QUEUE_COUNT;
- break;
-
- case SCI_MODE_SIZE:
- scic->remote_node_entries = SCI_MIN_REMOTE_DEVICES;
- scic->task_context_entries = SCI_MIN_IO_REQUESTS;
- scic->uf_control.buffers.count =
- SCU_MIN_UNSOLICITED_FRAMES;
- scic->completion_event_entries = SCU_MIN_EVENTS;
- scic->completion_queue_entries =
- SCU_MIN_COMPLETION_QUEUE_ENTRIES;
- break;
-
- default:
- status = SCI_FAILURE_INVALID_PARAMETER_VALUE;
- break;
- }
- } else
- status = SCI_FAILURE_INVALID_STATE;
-
- return status;
-}
-
static void scic_sds_controller_initialize_power_control(struct scic_sds_controller *scic)
{
sci_init_timer(&scic->power_control.timer, power_control_timeout);
static enum sci_status scic_controller_initialize(struct scic_sds_controller *scic)
{
struct sci_base_state_machine *sm = &scic->sm;
- enum sci_status result = SCI_SUCCESS;
struct isci_host *ihost = scic_to_ihost(scic);
- u32 index, state;
+ enum sci_status result = SCI_FAILURE;
+ unsigned long i, state, val;
if (scic->sm.current_state_id != SCIC_RESET) {
dev_warn(scic_to_dev(scic),
* / presently they seem to be wrong. */
scic_sds_controller_afe_initialization(scic);
- if (result == SCI_SUCCESS) {
- u32 status;
- u32 terminate_loop;
-
- /* Take the hardware out of reset */
- writel(0, &scic->smu_registers->soft_reset_control);
- /*
- * / @todo Provide meaningfull error code for hardware failure
- * result = SCI_FAILURE_CONTROLLER_HARDWARE; */
- result = SCI_FAILURE;
- terminate_loop = 100;
-
- while (terminate_loop-- && (result != SCI_SUCCESS)) {
- /* Loop until the hardware reports success */
- udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME);
- status = readl(&scic->smu_registers->control_status);
-
- if ((status & SCU_RAM_INIT_COMPLETED) ==
- SCU_RAM_INIT_COMPLETED)
- result = SCI_SUCCESS;
- }
- }
-
- if (result == SCI_SUCCESS) {
- u32 max_supported_ports;
- u32 max_supported_devices;
- u32 max_supported_io_requests;
- u32 device_context_capacity;
+ /* Take the hardware out of reset */
+ writel(0, &scic->smu_registers->soft_reset_control);
- /*
- * Determine what are the actaul device capacities that the
- * hardware will support */
- device_context_capacity =
- readl(&scic->smu_registers->device_context_capacity);
-
-
- max_supported_ports = smu_dcc_get_max_ports(device_context_capacity);
- max_supported_devices = smu_dcc_get_max_remote_node_context(device_context_capacity);
- max_supported_io_requests = smu_dcc_get_max_task_context(device_context_capacity);
+ /*
+ * / @todo Provide meaningfull error code for hardware failure
+ * result = SCI_FAILURE_CONTROLLER_HARDWARE; */
+ for (i = 100; i >= 1; i--) {
+ u32 status;
- /*
- * Make all PEs that are unassigned match up with the
- * logical ports
- */
- for (index = 0; index < max_supported_ports; index++) {
- struct scu_port_task_scheduler_group_registers __iomem
- *ptsg = &scic->scu_registers->peg0.ptsg;
+ /* Loop until the hardware reports success */
+ udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME);
+ status = readl(&scic->smu_registers->control_status);
- writel(index, &ptsg->protocol_engine[index]);
- }
+ if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED)
+ break;
+ }
+ if (i == 0)
+ goto out;
- /* Record the smaller of the two capacity values */
- scic->logical_port_entries =
- min(max_supported_ports, scic->logical_port_entries);
+ /*
+ * Determine what are the actaul device capacities that the
+ * hardware will support */
+ val = readl(&scic->smu_registers->device_context_capacity);
- scic->task_context_entries =
- min(max_supported_io_requests,
- scic->task_context_entries);
+ /* Record the smaller of the two capacity values */
+ scic->logical_port_entries = min(smu_max_ports(val), SCI_MAX_PORTS);
+ scic->task_context_entries = min(smu_max_task_contexts(val), SCI_MAX_IO_REQUESTS);
+ scic->remote_node_entries = min(smu_max_rncs(val), SCI_MAX_REMOTE_DEVICES);
- scic->remote_node_entries =
- min(max_supported_devices, scic->remote_node_entries);
+ /*
+ * Make all PEs that are unassigned match up with the
+ * logical ports
+ */
+ for (i = 0; i < scic->logical_port_entries; i++) {
+ struct scu_port_task_scheduler_group_registers __iomem
+ *ptsg = &scic->scu_registers->peg0.ptsg;
- /*
- * Now that we have the correct hardware reported minimum values
- * build the MDL for the controller. Default to a performance
- * configuration.
- */
- scic_controller_set_mode(scic, SCI_MODE_SPEED);
+ writel(i, &ptsg->protocol_engine[i]);
}
/* Initialize hardware PCI Relaxed ordering in DMA engines */
- if (result == SCI_SUCCESS) {
- u32 dma_configuration;
-
- /* Configure the payload DMA */
- dma_configuration =
- readl(&scic->scu_registers->sdma.pdma_configuration);
- dma_configuration |=
- SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
- writel(dma_configuration,
- &scic->scu_registers->sdma.pdma_configuration);
-
- /* Configure the control DMA */
- dma_configuration =
- readl(&scic->scu_registers->sdma.cdma_configuration);
- dma_configuration |=
- SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
- writel(dma_configuration,
- &scic->scu_registers->sdma.cdma_configuration);
- }
+ val = readl(&scic->scu_registers->sdma.pdma_configuration);
+ val |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
+ writel(val, &scic->scu_registers->sdma.pdma_configuration);
+
+ val = readl(&scic->scu_registers->sdma.cdma_configuration);
+ val |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
+ writel(val, &scic->scu_registers->sdma.cdma_configuration);
/*
* Initialize the PHYs before the PORTs because the PHY registers
* are accessed during the port initialization.
*/
- if (result == SCI_SUCCESS) {
- /* Initialize the phys */
- for (index = 0;
- (result == SCI_SUCCESS) && (index < SCI_MAX_PHYS);
- index++) {
- result = scic_sds_phy_initialize(
- &ihost->phys[index].sci,
- &scic->scu_registers->peg0.pe[index].tl,
- &scic->scu_registers->peg0.pe[index].ll);
- }
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ result = scic_sds_phy_initialize(&ihost->phys[i].sci,
+ &scic->scu_registers->peg0.pe[i].tl,
+ &scic->scu_registers->peg0.pe[i].ll);
+ if (result != SCI_SUCCESS)
+ goto out;
}
- if (result == SCI_SUCCESS) {
- /* Initialize the logical ports */
- for (index = 0;
- (index < scic->logical_port_entries) &&
- (result == SCI_SUCCESS);
- index++) {
- result = scic_sds_port_initialize(
- &ihost->ports[index].sci,
- &scic->scu_registers->peg0.ptsg.port[index],
- &scic->scu_registers->peg0.ptsg.protocol_engine,
- &scic->scu_registers->peg0.viit[index]);
- }
+ for (i = 0; i < scic->logical_port_entries; i++) {
+ result = scic_sds_port_initialize(&ihost->ports[i].sci,
+ &scic->scu_registers->peg0.ptsg.port[i],
+ &scic->scu_registers->peg0.ptsg.protocol_engine,
+ &scic->scu_registers->peg0.viit[i]);
+
+ if (result != SCI_SUCCESS)
+ goto out;
}
- if (result == SCI_SUCCESS)
- result = scic_sds_port_configuration_agent_initialize(
- scic,
- &scic->port_agent);
+ result = scic_sds_port_configuration_agent_initialize(scic, &scic->port_agent);
+ out:
/* Advance the controller state machine */
if (result == SCI_SUCCESS)
state = SCIC_INITIALIZED;
static int scic_controller_mem_init(struct scic_sds_controller *scic)
{
struct device *dev = scic_to_dev(scic);
- dma_addr_t dma_handle;
- enum sci_status result;
+ dma_addr_t dma;
+ size_t size;
+ int err;
- scic->completion_queue = dmam_alloc_coherent(dev,
- scic->completion_queue_entries * sizeof(u32),
- &dma_handle, GFP_KERNEL);
+ size = SCU_MAX_COMPLETION_QUEUE_ENTRIES * sizeof(u32);
+ scic->completion_queue = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL);
if (!scic->completion_queue)
return -ENOMEM;
- writel(lower_32_bits(dma_handle),
- &scic->smu_registers->completion_queue_lower);
- writel(upper_32_bits(dma_handle),
- &scic->smu_registers->completion_queue_upper);
+ writel(lower_32_bits(dma), &scic->smu_registers->completion_queue_lower);
+ writel(upper_32_bits(dma), &scic->smu_registers->completion_queue_upper);
- scic->remote_node_context_table = dmam_alloc_coherent(dev,
- scic->remote_node_entries *
- sizeof(union scu_remote_node_context),
- &dma_handle, GFP_KERNEL);
+ size = scic->remote_node_entries * sizeof(union scu_remote_node_context);
+ scic->remote_node_context_table = dmam_alloc_coherent(dev, size, &dma,
+ GFP_KERNEL);
if (!scic->remote_node_context_table)
return -ENOMEM;
- writel(lower_32_bits(dma_handle),
- &scic->smu_registers->remote_node_context_lower);
- writel(upper_32_bits(dma_handle),
- &scic->smu_registers->remote_node_context_upper);
+ writel(lower_32_bits(dma), &scic->smu_registers->remote_node_context_lower);
+ writel(upper_32_bits(dma), &scic->smu_registers->remote_node_context_upper);
- scic->task_context_table = dmam_alloc_coherent(dev,
- scic->task_context_entries *
- sizeof(struct scu_task_context),
- &dma_handle, GFP_KERNEL);
+ size = scic->task_context_entries * sizeof(struct scu_task_context),
+ scic->task_context_table = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL);
if (!scic->task_context_table)
return -ENOMEM;
- writel(lower_32_bits(dma_handle),
- &scic->smu_registers->host_task_table_lower);
- writel(upper_32_bits(dma_handle),
- &scic->smu_registers->host_task_table_upper);
+ writel(lower_32_bits(dma), &scic->smu_registers->host_task_table_lower);
+ writel(upper_32_bits(dma), &scic->smu_registers->host_task_table_upper);
- result = scic_sds_unsolicited_frame_control_construct(scic);
- if (result)
- return result;
+ err = scic_sds_unsolicited_frame_control_construct(scic);
+ if (err)
+ return err;
/*
* Inform the silicon as to the location of the UF headers and
*/
u32 logical_port_entries;
- /**
- * This field is the minimum number of hardware supported completion queue
- * entries and the software requested completion queue entries.
- */
- u32 completion_queue_entries;
-
- /**
- * This field is the minimum number of hardware supported event entries and
- * the software requested event entries.
- */
- u32 completion_event_entries;
-
/**
* This field is the minimum number of devices supported by the hardware and
* the number of devices requested by the software.
union scic_oem_parameters oem_parameters;
int id; /* unique within a given pci device */
- void *core_ctrl_memory;
struct dma_pool *dma_pool;
struct isci_phy phys[SCI_MAX_PHYS];
struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */
SCI_MODE_SIZE /* deprecated */
};
-#define SCI_MAX_PHYS (4)
+#define SCI_MAX_PHYS (4UL)
#define SCI_MAX_PORTS SCI_MAX_PHYS
-#define SCI_MIN_SMP_PHYS (38)
#define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */
-#define SCI_MAX_REMOTE_DEVICES (256)
-#define SCI_MIN_REMOTE_DEVICES (16)
-#define SCI_MAX_IO_REQUESTS (256)
-#define SCI_MIN_IO_REQUESTS (1)
+#define SCI_MAX_REMOTE_DEVICES (256UL)
+#define SCI_MAX_IO_REQUESTS (256UL)
#define SCI_MAX_MSIX_MESSAGES (2)
#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */
-#define SCI_MIN_SCATTER_GATHER_ELEMENTS 1
#define SCI_MAX_CONTROLLERS 2
#define SCI_MAX_DOMAINS SCI_MAX_PORTS
-/* 2 indicates the maximum number of UFs that can occur for a given IO request.
- * The hardware handles reception of additional unsolicited frames while all
- * UFs are in use, by holding off the transmitting device. This number could
- * be theoretically reduced to 1, but 2 provides for more reliable operation.
- * During SATA PIO operation, it is possible under some conditions for there to
- * be 3 separate FISes received, back to back to back (PIO Setup, Data, D2H
- * Register). It is unlikely to have all 3 pending all at once without some of
- * them already being processed.
- */
-#define SCU_MIN_UNSOLICITED_FRAMES (1)
-#define SCU_MIN_CRITICAL_NOTIFICATIONS (24)
-#define SCU_MIN_EVENTS (4)
-#define SCU_MIN_COMPLETION_QUEUE_SCRATCH (2)
-#define SCU_MIN_COMPLETION_QUEUE_ENTRIES (SCU_MIN_CRITICAL_NOTIFICATIONS \
- + SCU_MIN_EVENTS \
- + SCU_MIN_UNSOLICITED_FRAMES \
- + SCI_MIN_IO_REQUESTS \
- + SCU_MIN_COMPLETION_QUEUE_SCRATCH)
-
#define SCU_MAX_CRITICAL_NOTIFICATIONS (384)
#define SCU_MAX_EVENTS (128)
#define SCU_MAX_UNSOLICITED_FRAMES (128)
+ SCI_MAX_IO_REQUESTS \
+ SCU_MAX_COMPLETION_QUEUE_SCRATCH)
-#if !defined(ENABLE_MINIMUM_MEMORY_MODE)
-#define SCU_UNSOLICITED_FRAME_COUNT SCU_MAX_UNSOLICITED_FRAMES
-#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MAX_CRITICAL_NOTIFICATIONS
-#define SCU_EVENT_COUNT SCU_MAX_EVENTS
-#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MAX_COMPLETION_QUEUE_SCRATCH
-#define SCU_IO_REQUEST_COUNT SCI_MAX_IO_REQUESTS
-#define SCU_IO_REQUEST_SGE_COUNT SCI_MAX_SCATTER_GATHER_ELEMENTS
-#define SCU_COMPLETION_QUEUE_COUNT SCU_MAX_COMPLETION_QUEUE_ENTRIES
-#else
-#define SCU_UNSOLICITED_FRAME_COUNT SCU_MIN_UNSOLICITED_FRAMES
-#define SCU_CRITICAL_NOTIFICATION_COUNT SCU_MIN_CRITICAL_NOTIFICATIONS
-#define SCU_EVENT_COUNT SCU_MIN_EVENTS
-#define SCU_COMPLETION_QUEUE_SCRATCH SCU_MIN_COMPLETION_QUEUE_SCRATCH
-#define SCU_IO_REQUEST_COUNT SCI_MIN_IO_REQUESTS
-#define SCU_IO_REQUEST_SGE_COUNT SCI_MIN_SCATTER_GATHER_ELEMENTS
-#define SCU_COMPLETION_QUEUE_COUNT SCU_MIN_COMPLETION_QUEUE_ENTRIES
-#endif /* !defined(ENABLE_MINIMUM_MEMORY_OPERATION) */
-
-/**
- *
- *
- * The SCU_COMPLETION_QUEUE_COUNT constant indicates the size of the completion
- * queue into which the hardware DMAs 32-bit quantas (completion entries).
- */
-
-/**
- *
- *
- * This queue must be programmed to a power of 2 size (e.g. 32, 64, 1024, etc.).
- */
-#if (SCU_COMPLETION_QUEUE_COUNT != 16) && \
- (SCU_COMPLETION_QUEUE_COUNT != 32) && \
- (SCU_COMPLETION_QUEUE_COUNT != 64) && \
- (SCU_COMPLETION_QUEUE_COUNT != 128) && \
- (SCU_COMPLETION_QUEUE_COUNT != 256) && \
- (SCU_COMPLETION_QUEUE_COUNT != 512) && \
- (SCU_COMPLETION_QUEUE_COUNT != 1024)
-#error "SCU_COMPLETION_QUEUE_COUNT must be set to a power of 2."
-#endif
-
-#if SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES
-#error "Invalid configuration of unsolicited frame constants"
-#endif /* SCU_MIN_UNSOLICITED_FRAMES > SCU_MAX_UNSOLICITED_FRAMES */
-
-#define SCU_MIN_UF_TABLE_ENTRIES (8)
#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096)
#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024)
#define SCU_INVALID_FRAME_INDEX (0xFFFF)
#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF)
#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF)
-/*
- * Determine the size of the unsolicited frame array including
- * unused buffers. */
-#if SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES
-#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MIN_UF_TABLE_ENTRIES
-#else
-#define SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE SCU_MAX_UNSOLICITED_FRAMES
-#endif /* SCU_UNSOLICITED_FRAME_COUNT <= SCU_MIN_UF_TABLE_ENTRIES */
+static inline void check_sizes(void)
+{
+ BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_EVENTS);
+ BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES <= 8);
+ BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES);
+ BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES);
+ BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES);
+}
/**
* enum sci_status - This is the general return status enumeration for non-IO,
struct scu_task_context tc ____cacheline_aligned;
/* could be larger with sg chaining */
- #define SCU_SGL_SIZE ((SCU_IO_REQUEST_SGE_COUNT + 1) / 2)
+ #define SCU_SGL_SIZE ((SCI_MAX_SCATTER_GATHER_ELEMENTS + 1) / 2)
struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32)));
/*
#include "unsolicited_frame_control.h"
#include "registers.h"
-/**
- * This method will program the unsolicited frames (UFs) into the UF address
- * table and construct the UF frame structure being modeled in the core. It
- * will handle the case where some of the UFs are not being used and thus
- * should have entries programmed to zero in the address table.
- * @uf_control: This parameter specifies the unsolicted frame control object
- * for which to construct the unsolicited frames objects.
- * @uf_buffer_phys_address: This parameter specifies the physical address for
- * the first unsolicited frame buffer.
- * @uf_buffer_virt_address: This parameter specifies the virtual address for
- * the first unsolicited frame buffer.
- * @unused_uf_header_entries: This parameter specifies the number of unused UF
- * headers. This value can be non-zero when there are a non-power of 2
- * number of unsolicited frames being supported.
- * @used_uf_header_entries: This parameter specifies the number of actually
- * utilized UF headers.
- *
- */
-static void scic_sds_unsolicited_frame_control_construct_frames(
- struct scic_sds_unsolicited_frame_control *uf_control,
- dma_addr_t uf_buffer_phys_address,
- void *uf_buffer_virt_address,
- u32 unused_uf_header_entries,
- u32 used_uf_header_entries)
-{
- u32 index;
- struct scic_sds_unsolicited_frame *uf;
-
- /*
- * Program the unused buffers into the UF address table and the
- * controller's array of UFs.
- */
- for (index = 0; index < unused_uf_header_entries; index++) {
- uf = &uf_control->buffers.array[index];
-
- uf->buffer = NULL;
- uf_control->address_table.array[index] = 0;
- uf->header = &uf_control->headers.array[index];
- uf->state = UNSOLICITED_FRAME_EMPTY;
- }
-
- /*
- * Program the actual used UF buffers into the UF address table and
- * the controller's array of UFs.
- */
- for (index = unused_uf_header_entries;
- index < unused_uf_header_entries + used_uf_header_entries;
- index++) {
- uf = &uf_control->buffers.array[index];
-
- uf_control->address_table.array[index] = uf_buffer_phys_address;
-
- uf->buffer = uf_buffer_virt_address;
- uf->header = &uf_control->headers.array[index];
- uf->state = UNSOLICITED_FRAME_EMPTY;
-
- /*
- * Increment the address of the physical and virtual memory
- * pointers. Everything is aligned on 1k boundary with an
- * increment of 1k.
- */
- uf_buffer_virt_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
- uf_buffer_phys_address += SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
- }
-}
-
int scic_sds_unsolicited_frame_control_construct(struct scic_sds_controller *scic)
{
struct scic_sds_unsolicited_frame_control *uf_control = &scic->uf_control;
- u32 unused_uf_header_entries;
- u32 used_uf_header_entries;
- u32 used_uf_buffer_bytes;
- u32 unused_uf_header_bytes;
- u32 used_uf_header_bytes;
- dma_addr_t uf_buffer_phys_address;
- void *uf_buffer_virt_address;
+ struct scic_sds_unsolicited_frame *uf;
+ u32 buf_len, header_len, i;
+ dma_addr_t dma;
size_t size;
-
- /*
- * The UF buffer address table size must be programmed to a power
- * of 2. Find the first power of 2 that is equal to or greater then
- * the number of unsolicited frame buffers to be utilized.
- */
- uf_control->address_table.count = SCU_MIN_UF_TABLE_ENTRIES;
- while (uf_control->address_table.count < uf_control->buffers.count &&
- uf_control->address_table.count < SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES)
- uf_control->address_table.count <<= 1;
+ void *virt;
/*
* Prepare all of the memory sizes for the UF headers, UF address
* table, and UF buffers themselves.
*/
- used_uf_buffer_bytes = uf_control->buffers.count
- * SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
- unused_uf_header_entries = uf_control->address_table.count
- - uf_control->buffers.count;
- used_uf_header_entries = uf_control->buffers.count;
- unused_uf_header_bytes = unused_uf_header_entries
- * sizeof(struct scu_unsolicited_frame_header);
- used_uf_header_bytes = used_uf_header_entries
- * sizeof(struct scu_unsolicited_frame_header);
-
- size = used_uf_buffer_bytes + used_uf_header_bytes +
- uf_control->address_table.count * sizeof(dma_addr_t);
-
+ buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
+ header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header);
+ size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t);
/*
* The Unsolicited Frame buffers are set at the start of the UF
* memory descriptor entry. The headers and address table will be
* placed after the buffers.
*/
- uf_buffer_virt_address = dmam_alloc_coherent(scic_to_dev(scic), size,
- &uf_buffer_phys_address, GFP_KERNEL);
- if (!uf_buffer_virt_address)
+ virt = dmam_alloc_coherent(scic_to_dev(scic), size, &dma, GFP_KERNEL);
+ if (!virt)
return -ENOMEM;
/*
* headers, since we program the UF address table pointers to
* NULL.
*/
- uf_control->headers.physical_address =
- uf_buffer_phys_address +
- used_uf_buffer_bytes -
- unused_uf_header_bytes;
-
- uf_control->headers.array =
- uf_buffer_virt_address +
- used_uf_buffer_bytes -
- unused_uf_header_bytes;
+ uf_control->headers.physical_address = dma + buf_len;
+ uf_control->headers.array = virt + buf_len;
/*
* Program the location of the UF address table into the SCU.
* byte boundary already due to above programming headers being on a
* 64-bit boundary and headers are on a 64-bytes in size.
*/
- uf_control->address_table.physical_address =
- uf_buffer_phys_address +
- used_uf_buffer_bytes +
- used_uf_header_bytes;
-
- uf_control->address_table.array =
- uf_buffer_virt_address +
- used_uf_buffer_bytes +
- used_uf_header_bytes;
-
+ uf_control->address_table.physical_address = dma + buf_len + header_len;
+ uf_control->address_table.array = virt + buf_len + header_len;
uf_control->get = 0;
/*
* - Aligned on a 1KB boundary. */
/*
- * If the user provided less then the maximum amount of memory,
- * then be sure that we programm the first entries in the UF
- * address table to NULL. */
- scic_sds_unsolicited_frame_control_construct_frames(
- uf_control,
- uf_buffer_phys_address,
- uf_buffer_virt_address,
- unused_uf_header_entries,
- used_uf_header_entries
- );
+ * Program the actual used UF buffers into the UF address table and
+ * the controller's array of UFs.
+ */
+ for (i = 0; i < SCU_MAX_UNSOLICITED_FRAMES; i++) {
+ uf = &uf_control->buffers.array[i];
+
+ uf_control->address_table.array[i] = dma;
+
+ uf->buffer = virt;
+ uf->header = &uf_control->headers.array[i];
+ uf->state = UNSOLICITED_FRAME_EMPTY;
+
+ /*
+ * Increment the address of the physical and virtual memory
+ * pointers. Everything is aligned on 1k boundary with an
+ * increment of 1k.
+ */
+ virt += SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
+ dma += SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
+ }
return 0;
}
u32 frame_index,
void **frame_header)
{
- if (frame_index < uf_control->address_table.count) {
+ if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) {
/*
* Skip the first word in the frame since this is a controll word used
* by the hardware. */
u32 frame_index,
void **frame_buffer)
{
- if (frame_index < uf_control->address_table.count) {
+ if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) {
*frame_buffer = uf_control->buffers.array[frame_index].buffer;
return SCI_SUCCESS;
u32 frame_get;
u32 frame_cycle;
- frame_get = uf_control->get & (uf_control->address_table.count - 1);
- frame_cycle = uf_control->get & uf_control->address_table.count;
+ frame_get = uf_control->get & (SCU_MAX_UNSOLICITED_FRAMES - 1);
+ frame_cycle = uf_control->get & SCU_MAX_UNSOLICITED_FRAMES;
/*
* In the event there are NULL entries in the UF table, we need to
* advance the get pointer in order to find out if this frame should
* be released (i.e. update the get pointer). */
- while (((lower_32_bits(uf_control->address_table.array[frame_get])
- == 0) &&
- (upper_32_bits(uf_control->address_table.array[frame_get])
- == 0)) &&
- (frame_get < uf_control->address_table.count))
+ while (lower_32_bits(uf_control->address_table.array[frame_get]) == 0 &&
+ upper_32_bits(uf_control->address_table.array[frame_get]) == 0 &&
+ frame_get < SCU_MAX_UNSOLICITED_FRAMES)
frame_get++;
/*
* The table has a NULL entry as it's last element. This is
* illegal. */
- BUG_ON(frame_get >= uf_control->address_table.count);
+ BUG_ON(frame_get >= SCU_MAX_UNSOLICITED_FRAMES);
- if (frame_index < uf_control->address_table.count) {
+ if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) {
uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED;
/*
INCREMENT_QUEUE_GET(
frame_get,
frame_cycle,
- uf_control->address_table.count - 1,
- uf_control->address_table.count
- );
+ SCU_MAX_UNSOLICITED_FRAMES - 1,
+ SCU_MAX_UNSOLICITED_FRAMES);
}
uf_control->get =
*/
struct scic_sds_uf_buffer_array {
/**
- * This field is the minimum number of unsolicited frames supported by the
- * hardware and the number of unsolicited frames requested by the software.
- */
- u32 count;
-
- /**
- * This field is the SCIC_UNSOLICITED_FRAME data its used to manage
+ * This field is the unsolicited frame data its used to manage
* the data for the unsolicited frame requests. It also represents
* the virtual address location that corresponds to the
* physical_address field.
*/
- struct scic_sds_unsolicited_frame array[SCU_UNSOLICITED_FRAME_CONTROL_ARRAY_SIZE];
+ struct scic_sds_unsolicited_frame array[SCU_MAX_UNSOLICITED_FRAMES];
/**
* This field specifies the physical address location for the UF
* buffer array.
*/
dma_addr_t physical_address;
-
};
/**
* 1KB buffers into which the silicon will DMA unsolicited frames.
*/
struct scic_sds_uf_address_table_array {
- /**
- * This field specifies the actual programmed size of the
- * unsolicited frame buffer address table. The size of the table
- * can be larger than the actual number of UF buffers, but it must
- * be a power of 2 and the last entry in the table is not allowed
- * to be NULL.
- */
- u32 count;
-
/**
* This field represents a virtual pointer that refers to the
* starting address of the UF address table.
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff