ARM: S5P: add L2 early resume code

This patch adds code to resume L2 before MMU is enabled in
suspend and cpuidle resume paths. s3c_cpu_resume is moved to the
data section with appropriate comments.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S
index 0fd591bfc9fd23423b41e92ee6d2fbc2b7213650..006bd01eda0231e1d41d3832b6287f54a699bc98 100644 (file)
--- a/arch/arm/plat-s5p/sleep.S
+++ b/arch/arm/plat-s5p/sleep.S
@@ -23,9 +23,18 @@
 */
 
 #include <linux/linkage.h>
-#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
 
-       .text
+/*
+ *      The following code is located into the .data section. This is to
+ *      allow l2x0_regs_phys to be accessed with a relative load while we
+ *      can't rely on any MMU translation. We could have put l2x0_regs_phys
+ *      in the .text section as well, but some setups might insist on it to
+ *      be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+ */
+       .data
+       .align
 
        /*
         * sleep magic, to allow the bootloader to check for an valid
@@ -39,11 +48,34 @@
         * s3c_cpu_resume
         *
         * resume code entry for bootloader to call
-        *
-        * we must put this code here in the data segment as we have no
-        * other way of restoring the stack pointer after sleep, and we
-        * must not write to the code segment (code is read-only)
         */
 
 ENTRY(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+       adr     r0, l2x0_regs_phys
+       ldr     r0, [r0]
+       ldr     r1, [r0, #L2X0_R_PHY_BASE]
+       ldr     r2, [r1, #L2X0_CTRL]
+       tst     r2, #0x1
+       bne     resume_l2on
+       ldr     r2, [r0, #L2X0_R_AUX_CTRL]
+       str     r2, [r1, #L2X0_AUX_CTRL]
+       ldr     r2, [r0, #L2X0_R_TAG_LATENCY]
+       str     r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+       ldr     r2, [r0, #L2X0_R_DATA_LATENCY]
+       str     r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+       ldr     r2, [r0, #L2X0_R_PREFETCH_CTRL]
+       str     r2, [r1, #L2X0_PREFETCH_CTRL]
+       ldr     r2, [r0, #L2X0_R_PWR_CTRL]
+       str     r2, [r1, #L2X0_POWER_CTRL]
+       mov     r2, #1
+       str     r2, [r1, #L2X0_CTRL]
+resume_l2on:
+#endif
        b       cpu_resume
+ENDPROC(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+       .globl l2x0_regs_phys
+l2x0_regs_phys:
+       .long   0
+#endif