ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTs

This is no longer needed as the device specific wake-up event
can now be specified with interrupts-extended property where
the second interrupt is the pinctrl-single register, such as
the UART3 RX pin.

Note that twl4030_omap3.dtsi needs to set WAKEUPENABLE for
off-idle to properly trigger the PMIC scripts. And GPIO pins
still need to set WAKEUPENABLE for wake-up events.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 1becefce821b5ca59e0d66e330b4e2884db61d57..06a8aec4e6eaeb3c966b36a46e6d353005157e2a 100644 (file)
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -174,8 +174,8 @@
 
        uart3_pins: pinmux_uart3_pins {
                pinctrl-single,pins = <
-                       0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-                       0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+                       0x16e (PIN_INPUT | MUX_MODE0)   /* uart3_rx_irrx.uart3_rx_irrx */
+                       0x170 (PIN_OUTPUT | MUX_MODE0)  /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
                >;
        };