depends on CW1200 && MMC
help
Enable support for the CW1200 connected via an SDIO bus.
+ By default this driver only supports the Sagrad SG901-1091/1098 EVK
+ and similar designs that utilize a hardware reset circuit. To
+ support different CW1200 SDIO designs you will need to override
+ the default platform data by calling cw1200_sdio_set_platform_data()
+ in your board setup file.
config CW1200_WLAN_SPI
tristate "Support SPI platforms"
depends on CW1200 && SPI
help
- Enables support for the CW1200 connected via a SPI bus.
-
-config CW1200_WLAN_SAGRAD
- tristate "Support Sagrad SG901-1091/1098 modules"
- depends on CW1200_WLAN_SDIO
- help
- This provides the platform data glue to support the
- Sagrad SG901-1091/1098 modules in their standard SDIO EVK.
- It also includes example SPI platform data.
+ Enables support for the CW1200 connected via a SPI bus. You will
+ need to add appropriate platform data glue in your board setup
+ file.
menu "Driver debug features"
depends on CW1200 && DEBUG_FS
cw1200_wlan_sdio-y := cw1200_sdio.o
cw1200_wlan_spi-y := cw1200_spi.o
-cw1200_wlan_sagrad-y := cw1200_sagrad.o
obj-$(CONFIG_CW1200) += cw1200_core.o
obj-$(CONFIG_CW1200_WLAN_SDIO) += cw1200_wlan_sdio.o
obj-$(CONFIG_CW1200_WLAN_SPI) += cw1200_wlan_spi.o
-obj-$(CONFIG_CW1200_WLAN_SAGRAD) += cw1200_wlan_sagrad.o
+++ /dev/null
-/*
- * Platform glue data for ST-Ericsson CW1200 driver
- *
- * Copyright (c) 2013, Sagrad, Inc
- * Author: Solomon Peachy <speachy@sagrad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/platform_data/cw1200_platform.h>
-
-MODULE_AUTHOR("Solomon Peachy <speachy@sagrad.com>");
-MODULE_DESCRIPTION("ST-Ericsson CW1200 Platform glue driver");
-MODULE_LICENSE("GPL");
-
-/* Define just one of these. Feel free to customize as needed */
-#define SAGRAD_1091_1098_EVK_SDIO
-/* #define SAGRAD_1091_1098_EVK_SPI */
-
-#ifdef SAGRAD_1091_1098_EVK_SDIO
-static int cw1200_power_ctrl(const struct cw1200_platform_data_sdio *pdata,
- bool enable)
-{
- /* Control 3v3 and 1v8 to hardware as appropriate */
- /* Note this is not needed if it's controlled elsewhere or always on */
-
- /* May require delay for power to stabilize */
- return 0;
-}
-
-static int cw1200_clk_ctrl(const struct cw1200_platform_data_sdio *pdata,
- bool enable)
-{
- /* Turn CLK_32K off and on as appropriate. */
- /* Note this is not needed if it's always on */
-
- /* May require delay for clock to stabilize */
- return 0;
-}
-
-static struct cw1200_platform_data_sdio cw1200_platform_data = {
- .ref_clk = 38400,
- .have_5ghz = false,
-#if 0
- .reset = GPIO_RF_RESET, /* Replace as appropriate */
- .powerup = GPIO_RF_POWERUP, /* Replace as appropriate */
- .irq = GPIO_TO_IRQ(GPIO_RF_IRQ), /* Replace as appropriate */
-#endif
- .power_ctrl = cw1200_power_ctrl,
- .clk_ctrl = cw1200_clk_ctrl,
-/* .macaddr = ??? */
- .sdd_file = "sdd_sagrad_1091_1098.bin",
-};
-#endif
-
-#ifdef SAGRAD_1091_1098_EVK_SPI
-static int cw1200_power_ctrl(const struct cw1200_platform_data_spi *pdata,
- bool enable)
-{
- /* Control 3v3 and 1v8 to hardware as appropriate */
- /* Note this is not needed if it's controlled elsewhere or always on */
-
- /* May require delay for power to stabilize */
- return 0;
-}
-static int cw1200_clk_ctrl(const struct cw1200_platform_data_spi *pdata,
- bool enable)
-{
- /* Turn CLK_32K off and on as appropriate. */
- /* Note this is not needed if it's always on */
-
- /* May require delay for clock to stabilize */
- return 0;
-}
-
-static struct cw1200_platform_data_spi cw1200_platform_data = {
- .ref_clk = 38400,
- .spi_bits_per_word = 16,
- .reset = GPIO_RF_RESET, /* Replace as appropriate */
- .powerup = GPIO_RF_POWERUP, /* Replace as appropriate */
- .power_ctrl = cw1200_power_ctrl,
- .clk_ctrl = cw1200_clk_ctrl,
-/* .macaddr = ??? */
- .sdd_file = "sdd_sagrad_1091_1098.bin",
-};
-static struct spi_board_info myboard_spi_devices[] __initdata = {
- {
- .modalias = "cw1200_wlan_spi",
- .max_speed_hz = 10000000, /* 52MHz Max */
- .bus_num = 0,
- .irq = WIFI_IRQ,
- .platform_data = &cw1200_platform_data,
- .chip_select = 0,
- },
-};
-#endif
-
-
-const void *cw1200_get_platform_data(void)
-{
- return &cw1200_platform_data;
-}
-EXPORT_SYMBOL_GPL(cw1200_get_platform_data);
#define SDIO_BLOCK_SIZE (512)
+/* Default platform data for Sagrad modules */
+static struct cw1200_platform_data_sdio sagrad_109x_evk_platform_data = {
+ .ref_clk = 38400,
+ .have_5ghz = false,
+ .sdd_file = "sdd_sagrad_1091_1098.bin",
+};
+
+/* Allow platform data to be overridden */
+static struct cw1200_platform_data_sdio *global_plat_data = &sagrad_109x_evk_platform_data;
+
+void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata)
+{
+ global_plat_data = pdata;
+}
+
struct hwbus_priv {
struct sdio_func *func;
struct cw1200_common *core;
/* Probe Function to be called by SDIO stack when device is discovered */
static int cw1200_sdio_probe(struct sdio_func *func,
- const struct sdio_device_id *id)
+ const struct sdio_device_id *id)
{
struct hwbus_priv *self;
int status;
func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
- self->pdata = cw1200_get_platform_data();
+ self->pdata = global_plat_data; /* FIXME */
self->func = func;
sdio_set_drvdata(func, self);
sdio_claim_host(func);
const struct cw1200_platform_data_sdio *pdata;
int ret;
- pdata = cw1200_get_platform_data();
+ /* FIXME -- this won't support multiple devices */
+ pdata = global_plat_data;
if (cw1200_sdio_on(pdata)) {
ret = -1;
static void __exit cw1200_sdio_exit(void)
{
const struct cw1200_platform_data_sdio *pdata;
- pdata = cw1200_get_platform_data();
+
+ /* FIXME -- this won't support multiple devices */
+ pdata = global_plat_data;
sdio_unregister_driver(&sdio_driver);
cw1200_sdio_off(pdata);
}
const char *sdd_file; /* if NULL, will use default for detected hw type */
};
-const void *cw1200_get_platform_data(void);
+
+/* An example of SPI support in your board setup file:
+
+ static struct cw1200_platform_data_spi cw1200_platform_data = {
+ .ref_clk = 38400,
+ .spi_bits_per_word = 16,
+ .reset = GPIO_RF_RESET,
+ .powerup = GPIO_RF_POWERUP,
+ .macaddr = wifi_mac_addr,
+ .sdd_file = "sdd_sagrad_1091_1098.bin",
+ };
+ static struct spi_board_info myboard_spi_devices[] __initdata = {
+ {
+ .modalias = "cw1200_wlan_spi",
+ .max_speed_hz = 52000000,
+ .bus_num = 0,
+ .irq = WIFI_IRQ,
+ .platform_data = &cw1200_platform_data,
+ .chip_select = 0,
+ },
+ };
+
+ */
+
+/* An example of SDIO support in your board setup file:
+
+ static struct cw1200_platform_data_sdio my_cw1200_platform_data = {
+ .ref_clk = 38400,
+ .have_5ghz = false,
+ .sdd_file = "sdd_myplatform.bin",
+ };
+ cw1200_sdio_set_platform_data(&my_cw1200_platform_data);
+
+ */
+
+void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata);
#endif /* CW1200_PLAT_H_INCLUDED */
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff