pcmcia: soc_common: request legacy detect GPIO with active low

Request the legacy card detect signal with the active low property and
remove our own negation of the detection value.  This allows us to use
the firmware-defined polarities rather than hard-coding it into the
driver.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index e499c2b8d7df5a7b2b4bc316bf66f6cf6b3b868b..4036454b27853d4f0dfb9b635e209ff539c17f53 100644 (file)
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -165,8 +165,14 @@ static int soc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 
        for (i = 0; i < ARRAY_SIZE(skt->stat); i++) {
                if (gpio_is_valid(skt->stat[i].gpio)) {
+                       unsigned long flags = GPIOF_IN;
+
+                       /* CD is active low by default */
+                       if (i == SOC_STAT_CD)
+                               flags |= GPIOF_ACTIVE_LOW;
+
                        ret = devm_gpio_request_one(skt->socket.dev.parent,
-                                                   skt->stat[i].gpio, GPIOF_IN,
+                                                   skt->stat[i].gpio, flags,
                                                    skt->stat[i].name);
                        if (ret) {
                                __soc_pcmcia_hw_shutdown(skt, i);
@@ -233,11 +239,8 @@ static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt)
        state.bvd1 = 1;
        state.bvd2 = 1;
 
-       /* CD is active low by default */
        if (skt->stat[SOC_STAT_CD].desc)
-               state.detect = !gpiod_get_raw_value(skt->stat[SOC_STAT_CD].desc);
-
-       /* RDY and BVD are active high by default */
+               state.detect = !!gpiod_get_value(skt->stat[SOC_STAT_CD].desc);
        if (skt->stat[SOC_STAT_RDY].desc)
                state.ready = !!gpiod_get_value(skt->stat[SOC_STAT_RDY].desc);
        if (skt->stat[SOC_STAT_BVD1].desc)