[MIPS] Implement clockevents for R4000-style cp0 count/compare interrupt
authorRalf Baechle <ralf@linux-mips.org>
Thu, 11 Oct 2007 22:46:09 +0000 (23:46 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Thu, 11 Oct 2007 22:46:09 +0000 (23:46 +0100)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
20 files changed:
arch/mips/Kconfig
arch/mips/au1000/common/irq.c
arch/mips/configs/bigsur_defconfig
arch/mips/configs/sb1250-swarm_defconfig
arch/mips/kernel/process.c
arch/mips/kernel/smp.c
arch/mips/kernel/smtc.c
arch/mips/kernel/time.c
arch/mips/mips-boards/generic/time.c
arch/mips/qemu/q-irq.c
arch/mips/qemu/q-setup.c
arch/mips/sgi-ip22/ip22-int.c
arch/mips/sgi-ip32/ip32-irq.c
arch/mips/sibyte/Kconfig
arch/mips/sibyte/bcm1480/irq.c
arch/mips/sibyte/sb1250/irq.c
arch/mips/sibyte/sb1250/time.c
include/asm-mips/mach-ip27/irq.h
include/asm-mips/qemu.h
include/asm-mips/time.h

index 0cd0f835b13df0d0137c427dd5bedf5f57e15fc1..ecce3aab19810999c03473aa1b33c21a25eaf7a3 100644 (file)
@@ -335,6 +335,7 @@ config QEMU
        select GENERIC_ISA_DMA
        select HAVE_STD_PC_SERIAL_PORT
        select I8259
+       select IRQ_CPU
        select ISA
        select PCSPEAKER
        select SWAP_IO_SPACE
@@ -667,6 +668,10 @@ config GENERIC_CALIBRATE_DELAY
        bool
        default y
 
+config GENERIC_CLOCKEVENTS
+       bool
+       default y
+
 config GENERIC_TIME
        bool
        default y
@@ -901,6 +906,8 @@ config BOOT_ELF64
 
 menu "CPU selection"
 
+source "kernel/time/Kconfig"
+
 choice
        prompt "CPU type"
        default CPU_R4X00
index 47949d6f2c10c5c5f56b4e7c38e95d1ea7523769..a6640b998c6e06f99fca5982cb039562f15e3ccc 100644 (file)
@@ -633,7 +633,7 @@ asmlinkage void plat_irq_dispatch(void)
        unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
        if (pending & CAUSEF_IP7)
-               ll_timer_interrupt(63);
+               do_IRQ(63);
        else if (pending & CAUSEF_IP2)
                intc0_req0_irqdispatch();
        else if (pending & CAUSEF_IP3)
index 700a3a2d688e56c40c81a10c46b777f132335cfa..30f3e9a2466ff11cff7596a40730aeafe8dff41d 100644 (file)
@@ -69,7 +69,6 @@ CONFIG_SIBYTE_SB1xxx_SOC=y
 CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
-# CONFIG_SIBYTE_SB1250_PROF is not set
 # CONFIG_SIBYTE_TBPROF is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
index 93f9e8331ad744b21ac79fa183a43c372e22d9b8..3d1b6281d887b0ee4b28269b49a3995c089042d7 100644 (file)
@@ -70,7 +70,6 @@ CONFIG_SIBYTE_HAS_LDT=y
 CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
-# CONFIG_SIBYTE_SB1250_PROF is not set
 # CONFIG_SIBYTE_TBPROF is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
index aadd2cd5778cd9423929f48918f29af830807146..f99bb4085430b82556a5f9e728bdeaff91d38c33 100644 (file)
@@ -11,6 +11,7 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/tick.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
@@ -52,6 +53,7 @@ void __noreturn cpu_idle(void)
 {
        /* endless idle loop with no priority at all */
        while (1) {
+               tick_nohz_stop_sched_tick();
                while (!need_resched()) {
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
                        extern void smtc_idle_loop_hook(void);
@@ -61,6 +63,7 @@ void __noreturn cpu_idle(void)
                        if (cpu_wait)
                                (*cpu_wait)();
                }
+               tick_nohz_restart_sched_tick();
                preempt_enable_no_resched();
                schedule();
                preempt_disable();
index 73b0dab026687751266bd16bc15a276037d9d5b8..500a7ec2880fb0c086a02e8b9a88f9fe7f3727b3 100644 (file)
@@ -38,6 +38,7 @@
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/smp.h>
+#include <asm/time.h>
 
 #ifdef CONFIG_MIPS_MT_SMTC
 #include <asm/mipsmtregs.h>
@@ -70,6 +71,7 @@ asmlinkage __cpuinit void start_secondary(void)
        cpu_probe();
        cpu_report();
        per_cpu_trap_init();
+       mips_clockevent_init();
        prom_init_secondary();
 
        /*
index a7afbf2c9710ba01a349f92703453407c06c0f54..137183bba54f38bc1a12e8e56bdc0348c30ebd74 100644 (file)
@@ -867,7 +867,7 @@ void ipi_decode(struct smtc_ipi *pipi)
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
                clock_hang_reported[dest_copy] = 0;
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
-               local_timer_interrupt(0);
+               local_timer_interrupt(0, NULL);
                irq_exit();
                break;
        case LINUX_SMP_IPI:
index d23e6825e9886b315dfd22db7312ef13fd7f59f7..35988847c98a36777e2ef5d7793a2bc37ba3d2a9 100644 (file)
@@ -11,6 +11,7 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
+#include <linux/clockchips.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -34,6 +35,8 @@
 #include <asm/sections.h>
 #include <asm/time.h>
 
+#include <irq.h>
+
 /*
  * The integer part of the number of usecs per jiffy is taken from tick,
  * but the fractional part is not recorded, so we calculate it using the
@@ -70,10 +73,6 @@ int update_persistent_clock(struct timespec now)
 /* how many counter cycles in a jiffy */
 static unsigned long cycles_per_jiffy __read_mostly;
 
-/* expirelo is the count value for next CPU timer interrupt */
-static unsigned int expirelo;
-
-
 /*
  * Null timer ack for systems not needing one (e.g. i8254).
  */
@@ -92,18 +91,7 @@ static cycle_t null_hpt_read(void)
  */
 static void c0_timer_ack(void)
 {
-       unsigned int count;
-
-       /* Ack this timer interrupt and set the next one.  */
-       expirelo += cycles_per_jiffy;
-       write_c0_compare(expirelo);
-
-       /* Check to see if we have missed any timer interrupts.  */
-       while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
-               /* missed_timer_count++; */
-               expirelo = count + cycles_per_jiffy;
-               write_c0_compare(expirelo);
-       }
+       write_c0_compare(read_c0_compare());
 }
 
 /*
@@ -114,13 +102,6 @@ static cycle_t c0_hpt_read(void)
        return read_c0_count();
 }
 
-/* For use both as a high precision timer and an interrupt source.  */
-static void __init c0_hpt_timer_init(void)
-{
-       expirelo = read_c0_count() + cycles_per_jiffy;
-       write_c0_compare(expirelo);
-}
-
 int (*mips_timer_state)(void);
 void (*mips_timer_ack)(void);
 
@@ -140,35 +121,6 @@ void local_timer_interrupt(int irq, void *dev_id)
        update_process_times(user_mode(get_irq_regs()));
 }
 
-/*
- * High-level timer interrupt service routines.  This function
- * is set as irqaction->handler and is invoked through do_IRQ.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-       write_seqlock(&xtime_lock);
-
-       mips_timer_ack();
-
-       /*
-        * call the generic timer interrupt handling
-        */
-       do_timer(1);
-
-       write_sequnlock(&xtime_lock);
-
-       /*
-        * In UP mode, we call local_timer_interrupt() to do profiling
-        * and process accouting.
-        *
-        * In SMP mode, local_timer_interrupt() is invoked by appropriate
-        * low-level local timer interrupt handler.
-        */
-       local_timer_interrupt(irq, dev_id);
-
-       return IRQ_HANDLED;
-}
-
 int null_perf_irq(void)
 {
        return 0;
@@ -209,81 +161,6 @@ static inline int handle_perf_irq (int r2)
                !r2;
 }
 
-void ll_timer_interrupt(int irq, void *dev_id)
-{
-       int cpu = smp_processor_id();
-
-#ifdef CONFIG_MIPS_MT_SMTC
-       /*
-        *  In an SMTC system, one Count/Compare set exists per VPE.
-        *  Which TC within a VPE gets the interrupt is essentially
-        *  random - we only know that it shouldn't be one with
-        *  IXMT set. Whichever TC gets the interrupt needs to
-        *  send special interprocessor interrupts to the other
-        *  TCs to make sure that they schedule, etc.
-        *
-        *  That code is specific to the SMTC kernel, not to
-        *  the a particular platform, so it's invoked from
-        *  the general MIPS timer_interrupt routine.
-        */
-
-       /*
-        * We could be here due to timer interrupt,
-        * perf counter overflow, or both.
-        */
-       (void) handle_perf_irq(1);
-
-       if (read_c0_cause() & (1 << 30)) {
-               /*
-                * There are things we only want to do once per tick
-                * in an "MP" system.   One TC of each VPE will take
-                * the actual timer interrupt.  The others will get
-                * timer broadcast IPIs. We use whoever it is that takes
-                * the tick on VPE 0 to run the full timer_interrupt().
-                */
-               if (cpu_data[cpu].vpe_id == 0) {
-                       timer_interrupt(irq, NULL);
-               } else {
-                       write_c0_compare(read_c0_count() +
-                                        (mips_hpt_frequency/HZ));
-                       local_timer_interrupt(irq, dev_id);
-               }
-               smtc_timer_broadcast(cpu_data[cpu].vpe_id);
-       }
-#else /* CONFIG_MIPS_MT_SMTC */
-       int r2 = cpu_has_mips_r2;
-
-       if (handle_perf_irq(r2))
-               return;
-
-       if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
-               return;
-
-       if (cpu == 0) {
-               /*
-                * CPU 0 handles the global timer interrupt job and process
-                * accounting resets count/compare registers to trigger next
-                * timer int.
-                */
-               timer_interrupt(irq, NULL);
-       } else {
-               /* Everyone else needs to reset the timer int here as
-                  ll_local_timer_interrupt doesn't */
-               /*
-                * FIXME: need to cope with counter underflow.
-                * More support needs to be added to kernel/time for
-                * counter/timer interrupts on multiple CPU's
-                */
-               write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
-
-               /*
-                * Other CPUs should do profiling and process accounting
-                */
-               local_timer_interrupt(irq, dev_id);
-       }
-#endif /* CONFIG_MIPS_MT_SMTC */
-}
-
 /*
  * time_init() - it does the following things.
  *
@@ -301,12 +178,6 @@ void ll_timer_interrupt(int irq, void *dev_id)
 
 unsigned int mips_hpt_frequency;
 
-static struct irqaction timer_irqaction = {
-       .handler = timer_interrupt,
-       .flags = IRQF_DISABLED | IRQF_PERCPU,
-       .name = "timer",
-};
-
 static unsigned int __init calibrate_hpt(void)
 {
        cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
@@ -355,6 +226,65 @@ struct clocksource clocksource_mips = {
        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static int mips_next_event(unsigned long delta,
+                           struct clock_event_device *evt)
+{
+       unsigned int cnt;
+
+       cnt = read_c0_count();
+       cnt += delta;
+       write_c0_compare(cnt);
+
+       return ((long)(read_c0_count() - cnt ) > 0) ? -ETIME : 0;
+}
+
+static void mips_set_mode(enum clock_event_mode mode,
+                          struct clock_event_device *evt)
+{
+       /* Nothing to do ...  */
+}
+
+struct clock_event_device mips_clockevent;
+
+static struct clock_event_device *global_cd[NR_CPUS];
+static int cp0_timer_irq_installed;
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+       const int r2 = cpu_has_mips_r2;
+       struct clock_event_device *cd;
+       int cpu = smp_processor_id();
+
+       /*
+        * Suckage alert:
+        * Before R2 of the architecture there was no way to see if a
+        * performance counter interrupt was pending, so we have to run
+        * the performance counter interrupt handler anyway.
+        */
+       if (handle_perf_irq(r2))
+               goto out;
+
+       /*
+        * The same applies to performance counter interrupts.  But with the
+        * above we now know that the reason we got here must be a timer
+        * interrupt.  Being the paranoiacs we are we check anyway.
+        */
+       if (!r2 || (read_c0_cause() & (1 << 30))) {
+               c0_timer_ack();
+               cd = global_cd[cpu];
+               cd->event_handler(cd);
+       }
+
+out:
+       return IRQ_HANDLED;
+}
+
+static struct irqaction timer_irqaction = {
+       .handler = timer_interrupt,
+       .flags = IRQF_DISABLED | IRQF_PERCPU,
+       .name = "timer",
+};
+
 static void __init init_mips_clocksource(void)
 {
        u64 temp;
@@ -382,6 +312,56 @@ void __init __weak plat_time_init(void)
 {
 }
 
+void __init __weak plat_timer_setup(struct irqaction *irq)
+{
+}
+
+void __cpuinit mips_clockevent_init(void)
+{
+       uint64_t mips_freq = mips_hpt_frequency;
+       unsigned int cpu = smp_processor_id();
+       struct clock_event_device *cd;
+       unsigned int irq = MIPS_CPU_IRQ_BASE + 7;
+
+       if (!cpu_has_counter)
+               return;
+
+       if (cpu == 0)
+               cd = &mips_clockevent;
+       else
+               cd = kzalloc(sizeof(*cd), GFP_ATOMIC);
+       if (!cd)
+               return;         /* We're probably roadkill ...  */
+
+       cd->name                = "MIPS";
+       cd->features            = CLOCK_EVT_FEAT_ONESHOT;
+
+       /* Calculate the min / max delta */
+       cd->mult        = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+       cd->shift               = 32;
+       cd->max_delta_ns        = clockevent_delta2ns(0x7fffffff, cd);
+       cd->min_delta_ns        = clockevent_delta2ns(0x30, cd);
+
+       cd->rating              = 300;
+       cd->irq                 = irq;
+       cd->cpumask             = cpumask_of_cpu(cpu);
+       cd->set_next_event      = mips_next_event;
+       cd->set_mode            = mips_set_mode;
+
+       global_cd[cpu] = cd;
+       clockevents_register_device(cd);
+
+       if (!cp0_timer_irq_installed) {
+#ifdef CONFIG_MIPS_MT_SMTC
+#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
+               setup_irq_smtc(irq, &timer_irqaction, CPUCTR_IMASKBIT);
+#else
+               setup_irq(irq, &timer_irqaction);
+#endif /* CONFIG_MIPS_MT_SMTC */
+               cp0_timer_irq_installed = 1;
+       }
+}
+
 void __init time_init(void)
 {
        plat_time_init();
@@ -407,11 +387,6 @@ void __init time_init(void)
                                /* Calculate cache parameters.  */
                                cycles_per_jiffy =
                                        (mips_hpt_frequency + HZ / 2) / HZ;
-                               /*
-                                * This sets up the high precision
-                                * timer for the first interrupt.
-                                */
-                               c0_hpt_timer_init();
                        }
                }
                if (!mips_hpt_frequency)
@@ -421,6 +396,10 @@ void __init time_init(void)
                printk("Using %u.%03u MHz high precision timer.\n",
                       ((mips_hpt_frequency + 500) / 1000) / 1000,
                       ((mips_hpt_frequency + 500) / 1000) % 1000);
+
+#ifdef CONFIG_IRQ_CPU
+               setup_irq(MIPS_CPU_IRQ_BASE + 7, &timer_irqaction);
+#endif
        }
 
        if (!mips_timer_ack)
@@ -441,4 +420,5 @@ void __init time_init(void)
        plat_timer_setup(&timer_irqaction);
 
        init_mips_clocksource();
+       mips_clockevent_init();
 }
index 345de881013cbdc38fd36275711c393d9c59df48..2c8db3e0f4b7d8e8cd644d70da04e8f302e4bc46 100644 (file)
@@ -144,20 +144,20 @@ void __init plat_time_init(void)
        mips_scroll_message();
 }
 
-static irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
-{
-       return perf_irq();
-}
+//static irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
+//{
+//     return perf_irq();
+//}
 
-static struct irqaction perf_irqaction = {
-       .handler = mips_perf_interrupt,
-       .flags = IRQF_DISABLED | IRQF_PERCPU,
-       .name = "performance",
-};
+//static struct irqaction perf_irqaction = {
+//     .handler = mips_perf_interrupt,
+//     .flags = IRQF_DISABLED | IRQF_PERCPU,
+//     .name = "performance",
+//};
 
 void __init plat_perf_setup(void)
 {
-       struct irqaction *irq = &perf_irqaction;
+//     struct irqaction *irq = &perf_irqaction;
 
        cp0_perfcount_irq = -1;
 
@@ -170,12 +170,6 @@ void __init plat_perf_setup(void)
        if (cp0_perfcount_irq >= 0) {
                if (cpu_has_vint)
                        set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
-#ifdef CONFIG_MIPS_MT_SMTC
-               setup_irq_smtc(cp0_perfcount_irq, irq,
-                              0x100 << cp0_perfcount_irq);
-#else
-               setup_irq(cp0_perfcount_irq, irq);
-#endif /* CONFIG_MIPS_MT_SMTC */
 #ifdef CONFIG_SMP
                set_irq_handler(cp0_perfcount_irq, handle_percpu_irq);
 #endif
index 89891e984b3bc3c67f0c66ee81a65bb691311941..4681757460a118e50192772b4218cb8407e1bbb0 100644 (file)
@@ -2,6 +2,7 @@
 #include <linux/linkage.h>
 
 #include <asm/i8259.h>
+#include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/qemu.h>
 #include <asm/system.h>
@@ -12,7 +13,7 @@ asmlinkage void plat_irq_dispatch(void)
        unsigned int pending = read_c0_status() & read_c0_cause();
 
        if (pending & 0x8000) {
-               ll_timer_interrupt(Q_COUNT_COMPARE_IRQ);
+               do_IRQ(Q_COUNT_COMPARE_IRQ);
                return;
        }
        if (pending & 0x0400) {
@@ -29,6 +30,7 @@ void __init arch_init_irq(void)
 {
        mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK;             /* 100MHz */
 
+       mips_cpu_irq_init();
        init_i8259_irqs();
        set_c0_status(0x8400);
 }
index 841394336f0045d518104821de2c49c7b7aa9eb5..89a207650ce96a04e878d5a02501eb4b33e42c26 100644 (file)
@@ -17,7 +17,6 @@ void __init plat_timer_setup(struct irqaction *irq)
        outb_p(0x34,0x43);              /* binary, mode 2, LSB/MSB, ch 0 */
        outb_p(LATCH & 0xff , 0x40);    /* LSB */
        outb(LATCH >> 8 , 0x40);        /* MSB */
-       setup_irq(0, irq);
 }
 
 void __init plat_mem_setup(void)
index 338c0d706988a00eaa26cedb22a27cf731ef00d1..f199da7e49cf682faf3cbd8278b213356776d6df 100644 (file)
@@ -242,7 +242,7 @@ asmlinkage void plat_irq_dispatch(void)
         * First we check for r4k counter/timer IRQ.
         */
        if (pending & CAUSEF_IP7)
-               ll_timer_interrupt(SGI_TIMER_IRQ, NULL);
+               do_IRQ(SGI_TIMER_IRQ);
        else if (pending & CAUSEF_IP2)
                indy_local0_irqdispatch();
        else if (pending & CAUSEF_IP3)
index 5bad1b744d0f4bf262ded52658ec7d1a2f10968c..002095b364a3ffcb505d08c7dc621e58679b219c 100644 (file)
@@ -457,7 +457,7 @@ static void ip32_irq4(void)
 
 static void ip32_irq5(void)
 {
-       ll_timer_interrupt(IP32_R4K_TIMER_IRQ);
+       do_IRQ(IP32_R4K_TIMER_IRQ);
 }
 
 asmlinkage void plat_irq_dispatch(void)
index 841b301c99f001ced939e44f3caa3c979c7b1ab4..e8fb880272bd143ba42b8cec34a037f016771135 100644 (file)
@@ -1,6 +1,7 @@
 config SIBYTE_SB1250
        bool
        select HW_HAS_PCI
+       select IRQ_CPU
        select SIBYTE_ENABLE_LDT_IF_PCI
        select SIBYTE_HAS_ZBUS_PROFILING
        select SIBYTE_SB1xxx_SOC
@@ -8,6 +9,7 @@ config SIBYTE_SB1250
 
 config SIBYTE_BCM1120
        bool
+       select IRQ_CPU
        select SIBYTE_BCM112X
        select SIBYTE_HAS_ZBUS_PROFILING
        select SIBYTE_SB1xxx_SOC
@@ -15,6 +17,7 @@ config SIBYTE_BCM1120
 config SIBYTE_BCM1125
        bool
        select HW_HAS_PCI
+       select IRQ_CPU
        select SIBYTE_BCM112X
        select SIBYTE_HAS_ZBUS_PROFILING
        select SIBYTE_SB1xxx_SOC
@@ -22,6 +25,7 @@ config SIBYTE_BCM1125
 config SIBYTE_BCM1125H
        bool
        select HW_HAS_PCI
+       select IRQ_CPU
        select SIBYTE_BCM112X
        select SIBYTE_ENABLE_LDT_IF_PCI
        select SIBYTE_HAS_ZBUS_PROFILING
@@ -29,12 +33,14 @@ config SIBYTE_BCM1125H
 
 config SIBYTE_BCM112X
        bool
+       select IRQ_CPU
        select SIBYTE_SB1xxx_SOC
        select SIBYTE_HAS_ZBUS_PROFILING
 
 config SIBYTE_BCM1x80
        bool
        select HW_HAS_PCI
+       select IRQ_CPU
        select SIBYTE_HAS_ZBUS_PROFILING
        select SIBYTE_SB1xxx_SOC
        select SYS_SUPPORTS_SMP
@@ -42,6 +48,7 @@ config SIBYTE_BCM1x80
 config SIBYTE_BCM1x55
        bool
        select HW_HAS_PCI
+       select IRQ_CPU
        select SIBYTE_SB1xxx_SOC
        select SIBYTE_HAS_ZBUS_PROFILING
        select SYS_SUPPORTS_SMP
@@ -49,6 +56,7 @@ config SIBYTE_BCM1x55
 config SIBYTE_SB1xxx_SOC
        bool
        select DMA_COHERENT
+       select IRQ_CPU
        select SIBYTE_CFE
        select SWAP_IO_SPACE
        select SYS_SUPPORTS_32BIT_KERNEL
@@ -166,10 +174,6 @@ config SIBYTE_BW_TRACE
          buffer activity.  Raw buffer data is dumped to console, and
          must be processed off-line.
 
-config SIBYTE_SB1250_PROF
-       bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
-       depends on SIBYTE_SB1xxx_SOC
-
 config SIBYTE_TBPROF
        tristate "Support for ZBbus profiling"
        depends on SIBYTE_HAS_ZBUS_PROFILING
index e729b5f302643467162a8abb63f79868f66f506d..cf979dbb282d27c488adeb0388bdb1d9dc3591b6 100644 (file)
@@ -450,7 +450,6 @@ static void bcm1480_kgdb_interrupt(void)
 
 #endif         /* CONFIG_KGDB */
 
-extern void bcm1480_timer_interrupt(void);
 extern void bcm1480_mailbox_interrupt(void);
 
 asmlinkage void plat_irq_dispatch(void)
@@ -470,8 +469,16 @@ asmlinkage void plat_irq_dispatch(void)
        else
 #endif
 
-       if (pending & CAUSEF_IP4)
-               bcm1480_timer_interrupt();
+       if (pending & CAUSEF_IP4) {
+               int cpu = smp_processor_id();
+               int irq = K_BCM1480_INT_TIMER_0 + cpu;
+
+               /* Reset the timer */
+               __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+                           IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+               do_IRQ(irq);
+       }
 
 #ifdef CONFIG_SMP
        else if (pending & CAUSEF_IP3)
index ad593a6c20be2fb45a3135338d72a8310ae1bee9..6a4cc84194a995b5b02ce9435b9e448cbc4e0d8c 100644 (file)
@@ -28,6 +28,7 @@
 #include <asm/errno.h>
 #include <asm/signal.h>
 #include <asm/system.h>
+#include <asm/time.h>
 #include <asm/io.h>
 
 #include <asm/sibyte/sb1250_regs.h>
@@ -399,18 +400,45 @@ static void sb1250_kgdb_interrupt(void)
 
 #endif         /* CONFIG_KGDB */
 
-extern void sb1250_timer_interrupt(void);
+static inline void sb1250_timer_interrupt(void)
+{
+       int cpu = smp_processor_id();
+       int irq = K_INT_TIMER_0 + cpu;
+
+       irq_enter();
+       kstat_this_cpu.irqs[irq]++;
+
+       write_seqlock(&xtime_lock);
+
+       /* ACK interrupt */
+       ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+                      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+       /*
+        * call the generic timer interrupt handling
+        */
+       do_timer(1);
+
+       write_sequnlock(&xtime_lock);
+
+       /*
+        * In UP mode, we call local_timer_interrupt() to do profiling
+        * and process accouting.
+        *
+        * In SMP mode, local_timer_interrupt() is invoked by appropriate
+        * low-level local timer interrupt handler.
+        */
+       local_timer_interrupt(irq);
+
+       irq_exit();
+}
+
 extern void sb1250_mailbox_interrupt(void);
 
 asmlinkage void plat_irq_dispatch(void)
 {
        unsigned int pending;
 
-#ifdef CONFIG_SIBYTE_SB1250_PROF
-       /* Set compare to count to silence count/compare timer interrupts */
-       write_c0_compare(read_c0_count());
-#endif
-
        /*
         * What a pain. We have to be really careful saving the upper 32 bits
         * of any * register across function calls if we don't want them
@@ -423,13 +451,9 @@ asmlinkage void plat_irq_dispatch(void)
 
        pending = read_c0_cause() & read_c0_status() & ST0_IM;
 
-#ifdef CONFIG_SIBYTE_SB1250_PROF
-       if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
-               sbprof_cpu_intr();
-       else
-#endif
-
-       if (pending & CAUSEF_IP4)
+       if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
+               do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+       else if (pending & CAUSEF_IP4)
                sb1250_timer_interrupt();
 
 #ifdef CONFIG_SMP
index 5bb83cd4c113954e924557fde2cd4603d56af8d4..eb177075e9c09e9307fc3b096586e9278cb3a81e 100644 (file)
@@ -116,18 +116,6 @@ void sb1250_time_init(void)
         */
 }
 
-void sb1250_timer_interrupt(void)
-{
-       int cpu = smp_processor_id();
-       int irq = K_INT_TIMER_0 + cpu;
-
-       /* ACK interrupt */
-       ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-                      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-       ll_timer_interrupt(irq);
-}
-
 /*
  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  * again.
index 25f0c3f39adf14e0ad7eae21ae03f05477d9af41..cf4384bfa8460d64be78b787940391b083238ea5 100644 (file)
@@ -17,4 +17,6 @@
  */
 #define NR_IRQS 256
 
+#include_next <irq.h>
+
 #endif /* __ASM_MACH_IP27_IRQ_H */
index 531caf44560cca531de876941f33a828f58e8a4b..487ced4a40de1004729bd68d9a063f107c4bb94a 100644 (file)
@@ -12,7 +12,7 @@
  * Interrupt numbers
  */
 #define Q_PIC_IRQ_BASE         0
-#define Q_COUNT_COMPARE_IRQ    16
+#define Q_COUNT_COMPARE_IRQ    23
 
 /*
  * Qemu clock rate.  Unlike on real MIPS this has no relation to the
index 3516b32c9efb1060553ec4e56079705a7330757a..35555bd5c52d529a0720f216be336177ceef5620 100644 (file)
@@ -48,11 +48,6 @@ extern void (*mips_timer_ack)(void);
  */
 extern struct clocksource clocksource_mips;
 
-/*
- * The low-level timer interrupt routine.
- */
-extern void ll_timer_interrupt(int irq, void *dev_id);
-
 /*
  * profiling and process accouting is done separately in local_timer_interrupt
  */
@@ -78,4 +73,9 @@ extern unsigned int mips_hpt_frequency;
  */
 extern int (*perf_irq)(void);
 
+/*
+ * Initialize the calling CPU's compare interrupt as clockevent device
+ */
+extern void mips_clockevent_init(void);
+
 #endif /* _ASM_TIME_H */