ARM: S5PV210: move debug-macro.S into the common space

Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b7acfa396679148577b9b73e1d038f3d1617b1f2..8698fa11e43776de9b63b213fb7ab1ea5f161534 100644 (file)
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -617,6 +617,7 @@ choice
                depends on PLAT_SAMSUNG
                select DEBUG_EXYNOS_UART if ARCH_EXYNOS
                select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+               select DEBUG_S5PV210_UART if ARCH_S5PV210
                bool "Use Samsung S3C UART 0 for low-level debug"
                help
                  Say Y here if you want the debug print routines to direct
@@ -627,6 +628,7 @@ choice
                depends on PLAT_SAMSUNG
                select DEBUG_EXYNOS_UART if ARCH_EXYNOS
                select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+               select DEBUG_S5PV210_UART if ARCH_S5PV210
                bool "Use Samsung S3C UART 1 for low-level debug"
                help
                  Say Y here if you want the debug print routines to direct
@@ -637,6 +639,7 @@ choice
                depends on PLAT_SAMSUNG
                select DEBUG_EXYNOS_UART if ARCH_EXYNOS
                select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+               select DEBUG_S5PV210_UART if ARCH_S5PV210
                bool "Use Samsung S3C UART 2 for low-level debug"
                help
                  Say Y here if you want the debug print routines to direct
@@ -644,8 +647,9 @@ choice
                  by the boot-loader before use.
 
        config DEBUG_S3C_UART3
-               depends on PLAT_SAMSUNG && ARCH_EXYNOS
-               select DEBUG_EXYNOS_UART
+               depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+               select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+               select DEBUG_S5PV210_UART if ARCH_S5PV210
                bool "Use Samsung S3C UART 3 for low-level debug"
                help
                  Say Y here if you want the debug print routines to direct
@@ -937,6 +941,9 @@ config DEBUG_S3C2410_UART
 config DEBUG_S3C24XX_UART
        bool
 
+config DEBUG_S5PV210_UART
+       bool
+
 config DEBUG_OMAP2PLUS_UART
        bool
        depends on ARCH_OMAP2PLUS
@@ -997,6 +1004,7 @@ config DEBUG_LL_INCLUDE
        default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
        default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
        default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+       default "debug/s5pv210.S" if DEBUG_S5PV210_UART
        default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
        default "debug/sti.S" if DEBUG_STI_UART
        default "debug/tegra.S" if DEBUG_TEGRA_UART

diff --git a/arch/arm/include/debug/s5pv210.S b/arch/arm/include/debug/s5pv210.S
new file mode 100644 (file)
index 0000000..4f1a73e
--- /dev/null
+++ b/arch/arm/include/debug/s5pv210.S
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#define S3C_ADDR_BASE   0xF6000000
+#define S3C_VA_UART    S3C_ADDR_BASE + 0x01000000
+#define S5PV210_PA_UART        0xe2900000
+
+       /* note, for the boot process to work we have to keep the UART
+        * virtual address aligned to an 1MiB boundary for the L1
+        * mapping the head code makes. We keep the UART virtual address
+        * aligned and add in the offset when we load the value here.
+        */
+
+       .macro addruart, rp, rv, tmp
+               ldr     \rp, =S5PV210_PA_UART
+               ldr     \rv, =S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+               add     \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+               add     \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+       .endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <debug/samsung.S>

diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
deleted file mode 100644 (file)
index 30b511a..0000000
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *             http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
-       /* note, for the boot process to work we have to keep the UART
-        * virtual address aligned to an 1MiB boundary for the L1
-        * mapping the head code makes. We keep the UART virtual address
-        * aligned and add in the offset when we load the value here.
-        */
-
-       .macro addruart, rp, rv, tmp
-               ldr     \rp, = S3C_PA_UART
-               ldr     \rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-               add     \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-               add     \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-       .endm
-
-#define fifo_full fifo_full_s5pv210
-#define fifo_level fifo_level_s5pv210
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>